Evaluation of the surface tension measurement of axisymmetric drop shape analysis (ADSA) using a shape parameter

A quantitative criterion called “shape parameter” to evaluate the quality of surface tension measurement of Axisymmetric Drop Shape Analysis (ADSA) is presented. ADSA is a powerful technique for the measurement of interfacial tensions and contact angles of pendant drops, sessile drops, and bubbles. Despite the general success of ADSA, deficient results may be obtained for drops close to spherical shape. Therefore, the “shape parameter” was used to determine the range of drop shapes in which ADSA succeeds or fails. The “shape parameter” is a dimensionless parameter that expresses quantitatively the difference in shape between a given experimental profile and an inscribed circle. The surface tension measurements of ADSA were evaluated for both pendant drop and constrained sessile drop configurations using the shape parameter. Different shapes of the pendant drop were studied using different sizes and materials of holders. For each drop configuration, a “critical shape parameter” was defined based on the minimum value of the shape parameter that guarantees an error of less than ±0.1 mJ/m². Furthermore, the effects of the type of liquid and constellation on the “critical shape parameter” were studied.     

Positron binding energies for alkali hydrides

Ab initio multireference single- and double-excitation configuration interaction (MRD-CI) calculations are carried out to study the interactions of positrons with the members of the alkali hydride class of molecules. A new computer program has been constructed for this purpose that makes use of the Table-Direct-CI method for construction of the required Hamiltonian matrixes and electronic/positronic wave functions. The calculations indicate that the binding energy (positron affinity PA) of a single positron to these systems increases by an increment of 0.2-0.3 eV as the atomic number of the alkali atom is increased. It is found that the positron prefers a location in the more electronegative regions of such molecules, similarly as has been found in earlier calculations for the urea and acetone molecules. The positron orbital itself possesses a diffuse charge distribution with relatively small expectation values of the kinetic energy in all four systems considered. Each of the four positronic molecules is stable with respect to formation of either positronium (Ps) or HPs according to the present calculations. Relatively large changes in the equilibrium bond distance of the hydrides occur as a result of the positron interaction. The importance of bond dipole moments in producing the binding of positrons to molecules is discussed, as well as the role that the electronegativity of the constituent atoms plays in determining the magnitude of the PA for a given system.     

Re4(CO)12[μ3-InRe(CO)5]4 und Re2(CO)8[μ-InRe(CO)5]2-cluster aus dem reaktionssystem In/Re2(CO)10 in xylol

The thermally stable solids Re₂(CO)₈[μ-InRe(CO)₅]₂ and Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ could be obtained by treatment of In with Re₂(CO)₁₀ in a bomb tube. A mechanism of the formation of the latter cluster from the first one is proposed. Compared with Re₂(CO)₈[μ-InRe(CO)₅]₂, Re₄(CO)₁₂[μ₃_InRe(CO)₅]₄ shows in polar solvents an unusual high stability, which can be explained by the higher coordination number of In with rhenium carbonyl ligands. Re₄(CO)₁₂-[μ₃-InRe(CO)₅]₄ dissolves monomerically in acetone, where as Re₂(CO)₈[μ-InRe(CO)₅]₂ dissociates yielding Re(CO)₅^? anions. Single-crystal X-ray analyses of Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ establish the metal skeleton. The central molecular fragment Re₄(CO)₁₂ contains a tetrahedral arrangement of four bonded Re atoms [ReRe 302.8 (5) pm]. The triangles of this fragment are capped with a μ₃-InRe(CO)₅ group each [InRe(terminal) 273.5 (7) pm; InRe (polyhedral) 281.8 (7) pm]. The bridging type of In atoms with the Re₄ tetrahedron and the metal skeleton was realized for the first time. By treating Re₄(CO)₁₂[μ₃-InRe(CO)₅]₄ with Br₂ the existence of Re(CO)₅ ligands could be proved by isolating BrRe(CO)₅.     

Capillary array scanner for time-resolved detection and identification of fluorescently labelled DNA fragments

The first capillary array scanner for time-resolved fluorescence detection in parallel capillary electrophoresis based on semiconductor technology is described. The system consists essentially of a confocal fluorescence microscope and a x,y-microscope scanning stage. Fluorescence of the labelled probe molecules was excited using a short-pulse diode laser emitting at 640 nm with a repetition rate of 50 MHz. Using a single filter system the fluorescence decays of different labels were detected by an avalanche photodiode in combination with a PC plug-in card for time-correlated single-photon counting (TCSPC). The time-resolved fluorescence signals were analyzed and identified by a maximum likelihood estimator (MLE). The x,y-microscope scanning stage allows for discontinuous, bidirectional scanning of up to 16 capillaries in an array, resulting in longer fluorescence collection times per capillary compared to scanners working in a continuous mode. Synchronization of the alignment and measurement process were developed to allow for data acquisition without overhead. Detection limits in the subzeptomol range for different dye molecules separated in parallel capillaries have been achieved. In addition, we report on parallel time-resolved detection and separation of more than 400 bases of single base extension DNA fragments in capillary array electrophoresis. Using only semiconductor technology the presented technique represents a low-cost alternative for high throughput DNA sequencing in parallel capillaries.     

Particle zips: vertical emulsion films with particle monolayers at their surfaces

Vertical emulsion films with particle monolayers at their surfaces have been studied by direct microscope observations. The effects of particle wettability and surface coverage on the structure and stability of water films in octane and octane films in water have been investigated. Monodisperse silica particles (3 microm in diameter) hydrophobized to different extents have been used. It is found that the structure and stability of emulsion films strongly depend on the film type (water-in-oil or oil-in-water), the particle contact angle, the interactions between particles from the same and the opposite monolayer, and the monolayer density. Stable films are observed only when the particle wettability fulfills the condition for stable particle bridges--in agreement with the concept that hydrophilic particles can give stable oil-in-water emulsions, whereas hydrophobic ones give water-in-oil emulsions. In the case of water films with dilute disordered monolayers at their surfaces, the hydrophilic particles are expelled from the film center toward its periphery, giving a dimple surrounded by a ring of particles bridging the film surfaces. In contrast, the thinning of octane films with dilute ordered monolayers at their surfaces finally leads to the spontaneous formation of a dense crystalline monolayer of hydrophobic particles bridging both surfaces at the center of the film. The behaviors of water and octane films with dense close-packed particle monolayers at their surfaces are very similar. In both cases, a transition from bilayer to bridging monolayer is observed at rather low capillary pressures. The implications of the above finding for particle stabilized emulsions are discussed.     

Catalysts for convenient aerobic alcohol oxidations in air: systematic ligand studies in Pd/pyridine systems

We report highly convenient Pd catalysts for the aerobic oxidation of alcohols, which are generated in situ by combining commercially available catalyst precursors. Systematic optimizations of the L- and X-type ligand environment and the employed additive allow the use of air as the sole oxidant without formation of Pd black. The resulting novel protocol provides quantitative yields of a broad variety of ketones and aldehydes.     

Carboxylic Acids as Directing Groups for C−H Bond Functionalization

The selective transformation of C?H bonds is one of the most desirable approaches to creating complexity from simple building blocks. Several directing groups are efficient in controlling the regioselectivity of catalytic C?H bond functionalizations. Among them, carboxylic acids are particularly advantageous, since they are widely available in great structural diversity and at low cost. The carboxylate directing groups can be tracelessly cleaved or may serve as the anchor point for further functionalization through decarboxylative couplings. This Minireview summarizes the substantial progress made in the last few years in the development of reactions in which carboxylate groups direct C?H bond functionalizations with formation of C?C, C?O, C?N, or C?halogen bonds at specific positions. It is divided into sections on C?C, C?O, C?N, and C?halogen bond formation, each of which is subdivided by reactions and product classes. Particular emphasis is placed on methods that enable multiple derivatizations by combining carboxylate‐directed C?H functionalization with decarboxylative couplings.