Electrodes/Electrolyte Interfaces in the Presence of a Surface‐Modified Photopolymer Electrolyte: Application in Dye‐Sensitized Solar Cells

Since hundreds of studies on photoanodes and cathodes show that the electrode/electrolyte interfaces represent a key aspect at the base of dye‐sensitized solar cell (DSSC) performances, it is reported here that these interfaces can be managed by a smart design of the spatial composition of quasi‐solid electrolytes. By means of a cheap, rapid, and green process of photoinduced polymerization, composition‐tailored polymer electrolyte membranes (PEMs) with siloxane‐enriched surfaces are prepared, and their properties are thoroughly described. When assembled in DSSCs, the interfacial action promoted by the composition‐tailored PEMs enhances the photocurrent and fill factor values, thus increasing the global photovoltaic conversion efficiency with respect to the non‐modified PEMs. Moreover, the presence of the siloxane‐chain‐enriched surface increases the hydrophobicity and reduces the water vapor permeation into the device, thus enhancing the cell′s durability.     

Detection of explosives on the surface of banknotes by Raman hyperspectral imaging and independent component analysis

The aim of this study was to develop a methodology using Raman hyperspectral imaging and chemometric methods for identification of pre- and post-blast explosive residues on banknote surfaces. The explosives studied were of military, commercial and propellant uses. After the acquisition of the hyperspectral imaging, independent component analysis (ICA) was applied to extract the pure spectra and the distribution of the corresponding image constituents. The performance of the methodology was evaluated by the explained variance and the lack of fit of the models, by comparing the ICA recovered spectra with the reference spectra using correlation coefficients and by the presence of rotational ambiguity in the ICA solutions. The methodology was applied to forensic samples to solve an automated teller machine explosion case. Independent component analysis proved to be a suitable method of resolving curves, achieving equivalent performance with the multivariate curve resolution with alternating least squares (MCR-ALS) method. At low concentrations, MCR-ALS presents some limitations, as it did not provide the correct solution. The detection limit of the methodology presented in this study was 50 μg cm⁻².     

Syntheses of the opioid substructures 1,2,3,4,5,6-hexahydro-2,6-methano-3-benzazocine and 2,3,4,5-tetrahydro-1,5-methano-1H-2-benzazepine

Concise syntheses of 1,2,3,4,5,6-hexahydro-2,6-methano-3-benzazocine (12) and 2,3,4,5-tetrahydro-1,5-methano-1H-2-benzazepine (18) are described and involve an intramolecular Friedel-Crafts alkylation and an intramolecular Heck cyclization as their respective key ring-forming steps.     

Investigating the formation and the properties of monoalkyl carbonates in aqueous medium using capillary electrophoresis with capacitively coupled contactless conductivity detection

Although alkyl carbonic acids (ACAs) and their salts are referred to as instable species in aqueous medium, we demonstrate that a monoalkyl carbonate (MAC) can in fact be easily formed from bicarbonate and an alcohol even in the presence of a high amount of water. A CE system with two capacitively coupled contactless conductivity detectors (C?Ds) was used to obtain different parameters about these species and their reactions. Based on the mobilities obtained for a series of alcohols ranging from 1 to 5 carbons, the coefficients of diffusion and the hydrodynamic radii were calculated. When compared with the equivalent carboxylates, MACs have radii systematically smaller. Although the precise pK(a) values of the ACAs could not be obtained, because of the fast decomposition in acid medium, it was possible, for the first time, to show that they are below 4.0. This result suggests that the acidity of an ACA is quite similar to the first hydrogen of H?CO?. Using a new approach to indirectly calibrate the C?D, the kinetic constants and the equilibrium constants of formation were also obtained. The results suggest that the increase in the chain length makes the MACs less stable and more inert.     

One-pot triple functionalization of carbon nanotubes

Carbon nanotubes (CNTs) are very promising as carriers for the delivery of bioactive molecules. The multifunctionalization of CNTs is necessary to impart multimodalities for the development of future CNT-based multipotent therapeutic constructs. In this context, we report the first example of covalent trifunctionalization of different types of CNTs. Our strategy is a simple and efficient methodology based on the simultaneous functionalization of the nanotube surface with three different active groups. The reaction is performed in one step by arylation with diazonium salts generated in situ. The CNTs are functionalized with benzylamine moieties blocked with three different protecting groups that can be selectively removed under specific conditions. The trifunctionalized CNTs were characterized by TEM, thermogravimetric analysis, and Raman and UV/Vis/NIR spectroscopy, while the amine loading was determined by using the Kaiser test. The sequential removal of the protecting groups of the amine functions allows the grafting of the molecules of interest on the nanotube surface to be controlled.     

Carbon nanotube-nucleobase hybrids: nanorings from uracil-modified single-walled carbon nanotubes

Single‐walled carbon nanotubes (SWCNTs) have been covalently functionalized with uracil nucleobase. The hybrids have been characterized by using complementary spectroscopic and microscopic techniques including solid‐state NMR spectroscopy. The uracil‐functionalized SWCNTs are able to self‐assemble into regular nanorings with a diameter of 50–70 nm, as observed by AFM and TEM. AFM shows that the rings do not have a consistent height and thickness, which indicates that they may be formed by separate bundles of CNTs. The simplest model for the nanoring formation likely involves two bundles of CNTs interacting with each other via uracil–uracil base‐pairing at both CNT ends. These nanorings can be envisaged for the development of advanced electronic circuits.     

High-pressure access to the Δ9-cis- and Δ9-trans-tetrahydrocannabinols family

Diels-Alder reactions of a range of 1-(alkoxy/alkyl-substituted phenyl)buta-1,3-dienes with methyl vinyl ketone and methyl acrylate carried out in ethanol as the reaction medium under 9 kbar pressure were investigated. The use of high pressure as the activating method of the Diels-Alder reactions allows the efficient and endodiastereoselective generation of a series of cis-cyclohexenyl-benzene cycloadducts, which are selectively converted into their trans-epimers. The cis-cyclohexenyl-benzenes and trans-cyclohexenyl-benzenes produced are useful precursors for accessing substituted privileged cis-6a,7,8,10a-tetrahydro-6H-benzo[c]chromene and trans-6a,7,8,10a-tetrahydro-6H-benzo[c]chromene skeletons. The total syntheses of Δ(9)-cis-tetrahydrocannabinol (THC) and Δ(9)-trans-THC, through the use of selected Diels-Alder adducts, are described. Finally, a route for obtaining Δ(9)-trans-THC in both enantiomeric pure forms based on the (S)-(-)-1-amino-2-(methoxymethyl)pyrrolidine (SAMP)-hydrazone method is also reported.     

Theoretical study of O--O single bond formation in the oxidation of water by the ruthenium blue dimer

The first key step in the oxidation of water to O(2) by the oxidized species [(bpy)(2)(O)Ru(V)ORu(V)(O)(bpy)(2)](4+) of the Ru blue dimer is studied using density functional theory (DFT) and an explicit solvent treatment. In the model reaction system [L(2)(O)Ru(V)ORu(V)(O)L(2)](4+)·(H(2)O)(4)·W(76), the surrounding water solvent molecules W are described classically while the inner core reaction system is described quantum mechanically using smaller model ligands (L). The reaction path found for the O--O single bond formation involves a proton relay chain: direct participation of two water molecules in two proton transfers to yield the product [L(2)(HOO)Ru(IV)ORu(IV)(OH)L(2)](4+)·(H(2)O)(3)·W(76). The calculated ～3 kcal/mol reaction free energy and ～15 kcal/mol activation free energy barrier at 298 K are consistent with experiment. Structural changes and charge flow along the intrinsic reaction coordinate, the solvent's role in the reaction barrier, and their significance for water oxidation catalysis are examined in detail.