Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.     

A molecular mechanics approach for analyzing tensile nonlinear deformation behavior of single-walled carbon nanotubes

In this paper, by capturing the atomic information and reflecting the behaviour governed by the nonlinear potential function, an analytical molecular mechanics approach is proposed. A constitutive relation for single-walled carbon nanotubes (SWCNT’s) is established to describe the nonlinear stress-strain curve of SWCNT’s and to predict both the elastic properties and breaking strain of SWCNT’s during tensile deformation. An analysis based on the virtual internal bond (VIB) model proposed by P. Zhang et al. is also presented for comparison. The results indicate that the proposed molecular mechanics approach is indeed an acceptable analytical method for analyzing the mechanical behavior of SWCNT’s. The project supported by the National Natural Science Foundation of China (10121202, 90305015 and 10328203), the Key Grant Project of Chinese Ministry of Education (0306) and the Research Grants Council of the Hong Kong Special Administrative Region, China (HKU 7195/04E).     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

Analysis of Organic Compounds in Antarctic Snow and Their Origin

Abstract

Organic compounds extractable with n-hexane were identified and quantitatively determined in pack, surface and deep snow samples taken at different depths and collected at several altitudes above sea level from Antarctica during the 1993/94 Italian expedition. The comparison between the composition of organic compounds in snow and the ones in pack and sea-water samples pointed out that the three matrices substantially contain the same biogenic and anthropogenic organic compounds. The contribution of marine aerosol to organic content in the snow is confirmed by the enrichment ratios calculated for the more representative classes of identified compounds (n-alkanes, phthalates and low molecular weight alkylbenzenes). The changes in the composition of organic compounds in snow as the altitude increases seem to depend on the dimensional spectrum of the aerosol. Thus, smallest particles, richest in surfactant material, reach the highest altitudes.     

The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Cellulose whiskers were prepared from wood- and cotton-based microcrystalline cellulose and dried by two methods: freeze-drying or air-drying. The effect of drying method on the properties and structure of the whiskers were studied. Furthermore, the influence of the source of cellulose on the nanoscale structure was investigated. Drying method was observed to slightly influence the thermal stability of cellulose whiskers, whereas the char residue varied significantly depending on the drying process performed. Small- and wide-angle X-ray scattering and solid state nuclear magnetic resonance spectroscopy were used to examine the crystallinity and nanoscale structure of the dried whiskers. It was observed that the crystal structure and crystallinity of cellulose whiskers remained during all treatments, whereas their nanoscale structure was significantly influenced by drying method, neutralization, and source of cellulose. Relationships between thermal behavior and nanoscale structure were reported and discussed.     

DSC study of stabilizing effect of antioxidant mixtures in styrene-butadiene rubber

The type of cooperation between antioxidants in the binary mixtures of four substituted diphenylamines and phenotiazine in the stabilization of styrene-butadiene rubber has been tested. Thermooxidation of the samples has been studied by differential scanning calorimetry under non-isothermal conditions. The protection factors of the individual stabilizers and their mixtures were determined. The synergy factors were applied to asses the type of cooperation of antioxidants in the mixtures. From their values it can be concluded that the type of cooperation depends on temperature. The highest synergistic effect has been observed for the mixture of phenotiazine and [4-(1-methyl-1-phenyl-ethyl)-phenyl]-phenylamine.     

Numerical simulation for the temperature changing rule of the crude oil in a storage tank based on the wavelet finite element method

In order to study the temperature changing rule of the crude oil in the storage tank, the wavelet finite element method, the traditional finite element method and the test were used to carry out the numerical simulation. Firstly, the thermal wavelet finite element was put forward established based on thermal finite element theory and the wavelet theory. And the computational model and three boundary conditions were established. And then the temperature changing rule of the crude oil in the storage tank in 24 h for three boundary conditions was obtained by using three methods, and the results showed that the wavelet finite element method had advantages in the numerical analysis of the temperature changing rule of the crude oil in the storage. And then the temperature distribution rule of the crude oil in the storage tank under different conditions in 5 h was obtained. And the temperature changing mechanism of the crude oil was summarized finally.     

Quantification methods of amorphous/crystalline fractions in high-energy ball milled pharmaceutical products

In this work, thermoanalytical, diffractometry, and microscopy measurements have been performed in order to characterize the effect of high energy milling on a drug active in the migraine prophylaxis and smoke cessation. We can assert that the mechanical treatment induces only a partial amorphisation of the solid phase, in particular it reduces the crystal order by producing lattice defects which propagate from the surface to the bulk crystal. For this reason, the DSC is able to detect the presence of ordered solid, while the powder X-ray diffractometry, because of its low penetration depth, does not reach the crystalline core of the particles.