Determination of levofloxacin in pharmaceutical formulations and urine at reduced graphene oxide and carbon nanotube-modified electrodes

Journal of Solid State Electrochemistry - In this paper, we compare reduced graphene oxide (RGO) electrode with multi-walled carbon nanotubes (MWCNT) as modifiers for the sensitive detection of...     

Effect of the electrodeposition potential on the photoelectroactivity of the SnS/Sb2S3 thin films

Journal of Solid State Electrochemistry - The present work outlines a simple and novel approach to obtain nanostructured and heterostructured SnS/Sb2S3 thin films. This material showed enhanced...     

Effect of microcrystalline and microfibrillated cellulose on the evolution of hydration of cement pastes by thermogravimetry

Journal of Thermal Analysis and Calorimetry - The interest in the use of cellulose fibers of increasingly smaller sizes in cementitious materials has increased in recent years. This paper brings...     

Determination of phenolic compounds,in vitro antioxidant activity and characterization of secondary metabolites in different parts of Passiflora cincinnata by HPLC-DAD-MS/MS analysis

Abstract

Ethanol extracts of different parts of Passiflora cincinnata were obtained by maceration. The total phenolic and flavonoid contents were evaluated. The antioxidant activities were determined by β-carotene-linoleic acid bleaching test, 2,2-diphenyl-1-picrylhydrazil (DPPH), and 2,2’-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging. The crude ethanol stem extract showed the highest amount of total polyphenols (45.53?mg gallic acid equivalent/g) while the highest total flavonoid contents (1.42?mg of quercetin equivalent/g) were observed in the leaf extract. The lowest IC₅₀ (25.65?μg/ml) by the DPPH method was observed for the stem extract. The ABTS method showed a significant antioxidant activity for all investigated extracts. The secondary metabolite composition of ethanol extracts was assessed by HPLC-DAD-MS/MS analysis, leading to the identification of fourteen secondary metabolites in P. cincinnata extracts. These results showed the potentiality of this species as a source of phenolic compounds and antioxidants.     

Simulation of Organic Liquid Product Deoxygenation through Multistage Countercurrent Absorber/Stripping Using CO2 as Solvent with Aspen-HYSYS: Process Modeling and Simulation

In this work, the deoxygenation of organic liquid products (OLP) obtained through the thermal catalytic cracking of palm oil at 450 °C, 1.0 atmosphere, with 10% (wt.) Na₂CO₃ as a catalyst, in multistage countercurrent absorber columns using supercritical carbon dioxide (SC-CO₂) as a solvent, with an Aspen-HYSYS process simulator, was systematically investigated. In a previous study, the thermodynamic data basis and EOS modeling necessary to simulate the deoxygenation of OLP was presented. This work addresses a new flowsheet, consisting of 03 absorber columns, 10 expansions valves, 10 flash drums, 08 heat exchanges, 01 pressure pump, and 02 make-ups of CO₂, aiming to improve the deacidification of OLP. The simulation was performed at 333 K, 140 bar, and (S/F) = 17; 350 K, 140 bar, and (S/F) = 38; 333 K, 140 bar, and (S/F) = 25. The simulation shows that 81.49% of OLP could be recovered and that the concentrations of hydrocarbons in the extracts of absorber-01 and absorber-02 were 96.95 and 92.78% (wt.) on a solvent-free basis, while the bottom stream of absorber-03 was enriched in oxygenated compounds with concentrations of up to 32.66% (wt.) on a solvent-free basis, showing that the organic liquid products (OLP) were deacidified and SC-CO₂ was able to deacidify the OLP and obtain fractions with lower olefin contents. The best deacidifying condition was obtained at 333 K, 140 bar, and (S/F) = 17.     

A Quasilinear System Related with the Asymptotic Equation of the Nematic Liquid Crystal’s Director Field*

In this paper, the author studies the local existence of strong solutions and their possible blow-up in time for a quasilinear system describing the interaction of a short wave induced by an electron field with a long wave representing an extension of the motion of the director field in a nematic liquid crystal’s asymptotic model introduced in [Saxton, R. A., Dynamic instability of the liquid crystal director. In: Current Progress in Hyperbolic Systems (Lindquist, W. B., ed.), Contemp. Math., Vol.100, Amer. Math.Soc., Providence, RI, 1989, pp.325–330] and [Hunter, J. K. and Saxton, R. A., Dynamics of director fields, SIAM J. Appl. Math., 51, 1991, 1498–1521] and studied in [Hunter, J. K. and Zheng, Y., On a nonlinear hyperbolic variational equation I, Arch. Rat. Mech. Anal.,129, 1995, 305–353], [Hunter, J. K. and Zheng, Y., On a nonlinear hyperbolic variational equation II, Arch. Rat. Mech. Anal., 129, 1995, 355–383] and in [Zhang, P. and Zheng,Y., On oscillation of an asymptotic equation of a nonlinear variational wave equation,Asymptotic Anal., 18, 1998, 307–327] and, more recently, in [Bressan, A., Zhang, P. and Zheng, Y., Asymptotic variational wave equations, Arch. Rat. Mech. Anal., 183, 2007,163–185].     

Noninvasive Temperature Measurement in Dental Materials Using Nd3+, Yb3+ Doped Nanoparticles Emitting in the Near Infrared Region

In this work, the application of near infrared (NIR)-emitting NaYbF₄:1%Tm³⁺@NaLuF₄:30%Nd³⁺ core–shell nanoparticles is reported for noninvasive probing and monitoring the temperature during photopolymerization of dental materials. When excited at 808 nm, the synthesized nanoparticles emit NIR photoluminescence (PL) with two distinctive peaks at 865 and 980 nm which correspond to radiative transitions from the doped Nd³⁺ and Yb³⁺ ions, respectively. Luminescence intensity ratio between these two bands is found to vary with temperature due to temperature-dependent electronic excitation energy transfer between Nd³⁺ and Yb³⁺ ions at the core/shell interface. This finding allows luminescence ratiometric evaluation of the in situ temperature during photopolymerization of resin cement (doped with nanoparticles) in a veneer placement procedure. In addition, the NIR emission also enables PL imaging of the distribution of the adhesive under the veneer. The results highlight that rare-earth ions–doped nanoparticles with both excitation and emission in the NIR spectral range are advantageous for both PL-based nanothermometry and imaging due to the reduced attenuation of NIR light by dental ceramics.     

Pulsed Nd:YAG laser welding of AISI 304 to AISI 420 stainless steels

The technique to weld AISI 304 stainless steel to AISI 420 stainless steel with a pulsed Nd:YAG laser has been investigated. The main objective of this study was to determine the influence of the laser beam position, with respect to the joint, on weld characteristics. Specimens were welded with the laser beam incident on the joint and moved 0.1 and 0.2 mm on either side of the joint. The joints were examined in an optical microscope for cracks, pores and to determine the weld geometry. The microstructure of the weld and the heat affected zones were observed in a scanning electron microscope. An energy dispersive spectrometer, coupled to the scanning electron microscope, was used to determine variations in (weight %) the main chemical elements across the fillet weld. Vickers microhardness testing and tensile testing were carried out to determine the mechanical properties of the weld. The results of the various tests and examinations enabled definition of the best position for the incident laser beam with respect to the joint, for welding together the two stainless steels.     

Effects of the dispersion methods in Pluronic F108 on the size and the surface composition of MWCNTs and their implications in toxicology assessment

Multi-walled carbon nanotubes (MWCNTs) were dispersed in water and in a Pluronic F108 solution by four different dispersion methods (stirring, bath sonication, stirring followed by bath sonication, and sonication probe). The effect of the dispersion methods were evaluated in terms of the particle size distribution, the agglomerates size, and the exfoliated fraction produced, as well as in terms of the surface and bulk chemical composition. Energy dispersive X-ray, X-ray photoelectron spectroscopy, and centrifugal liquid sedimentation techniques were used to characterize pristine MWCNTs and their dispersion. It is shown that, irrespective of the dispersion methods used, the MWCNTs are strongly wrapped with the biocompatible surfactant Pluronic F108, thereby modifying the external surface of the MWCNTs. Some shortening of MWCNTs and more wrapping are also observed when sonication methods are used. These observations raise questions as to the validity of results obtained in toxicology tests, in vitro and in vivo, were such methods of dispersion procedures are used.