On-line analysis of volatile chlorinated hydrocarbons in air by gas chromatography–mass spectrometry: Improvements in preconcentration and injection steps

An analytical system composed of a cryofocusing trap injector device coupled to a gas chromatograph with mass spectrometric detection (CTI-GC–MS) specific for the on-line analysis in air of volatile chlorinated hydrocarbons (VCHCs) (dichloromethane; chloroform; 1,1,1-trichloroethane; tetrachloromethane; 1,1,2-trichloroethylene; tetrachloroethylene) was developed. The cryofocusing trap injector was the result of appropriate low cost modifications to an original purge-and-trap device to make it suitable for direct air analysis even in the case of only slightly contaminated air samples, such as those from remote zones. The CTI device can rapidly and easily be rearranged into the purge-and-trap allowing water and air analysis with the same apparatus. Air samples, collected in stainless steel canisters, were introduced directly into the CTI-GC–MS system to realize cryo-concentration (at −120 °C), thermal desorption (at 200 °C) and for the subsequent analysis of volatiles. The operating phases and conditions were customised and optimized. Recovery efficiency was optimized in terms of moisture removal, cold trap temperature and sampling mass flow. The injection of entrapped volatiles was realized through a direct transfer with high chromatographic reliability (capillary column–capillary column). These improvements allowed obtaining limits of detection (LODs) at least one order of magnitude lower than current LODs for the investigated substances. The method was successfully employed on real samples: air from urban and rural areas and air from remote zones such as Antarctica.     

Structural constraints from proton-mediated rare-spin correlation spectroscopy in rotating solids

A novel solid-state NMR concept is introduced that allows for the detection of through-space proton-proton contacts in high spectral resolution. The proposed method not only can be utilized to infer sequential assignments and backbone or side chain conformation in solid-phase polypeptides, but it also provides information about the three-dimensional arrangement of the molecule of interest. As a result, the molecular structure can be studied without additional restrictions regarding sample labeling or magic angle spinning rates.     

Total synthesis of (-)-microcarpalide, a novel microfilament disrupting metabolite

The stereoselective total synthesis of (-)-microcarpalide, a recently discovered 10-membered lactone of fungal origin displaying a remarkable disrupting action on actin microfilaments, was accomplished by using ring-closing metathesis (RCM) as the key step for the formation of the medium-sized ring. The diene ester required for the macrocyclization reaction was assembled via DCC-mediated esterification of two suitable partners, each bearing a terminal alkene group. The alcohol fragment was synthesized from n-bromohexane through a seven-step sequence entailing two consecutive stereoselective homologations of chiral boronic esters as strategic transformations for the sequential insertion of the two stereocentres with the final S absolute configuration, using (+)-pinanediol as the chiral director; final elaboration to the desired C(11) framework envisaged treatment with an allyl Grignard reagent and oxidative cleavage of the boronic scaffold. In contrast, the acidic fragment was prepared in ten steps from d-tartaric acid, whose C(4) backbone was elongated to the required C(7) skeleton by means of two distinct Swern-Wittig oxidation-homologation sequences.     

Heavy metals in marine coastal sediments: assessing sources, fluxes, history and trends

Examples are presented from the Adriatic Sea, the Ligurian Sea and the Venice Lagoon to illustrate different approaches to the study of anthropogenic metals in marine coastal sediments. These examples refer to studies of areal distribution and transport mechanisms, individuation of the sources, sediment dating, chronology of the fluxes, present and past trends. In particular, some of the findings achieved in studying the Venice Lagoon are discussed from the point of view of anthropogenic changes both in sediment composition and contaminant fluxes.     

Polycyclic aromatic hydrocarbons in the atmosphere: monitoring, sources, sinks and fate. II: Sinks and fate

This paper reviews the transformation processes that polycyclic aromatic hydrocarbons (PAHs) undergo in the atmosphere. These processes can take place both in the gas phase and in the particulate/aerosol one. Among the gas-phase processes, the most important ones are the daytime reaction with *OH and the nighttime reaction with *NO3. The relative importance of the two processes depends on the particular PAH molecule. For instance, gaseous naphthalene is mainly removed from the atmosphere upon reaction with *OH, while gaseous phenanthrene is mainly removed by reaction with *NO3. Oxy-, hydroxy-, and nitro-PAHs are the main transformation intermediates. Reaction with ozone and photolysis play a secondary role in the transformation of gaseous PAHs. The particle-associated processes are usually slower than the gas-phase ones, thus the gas-phase PAHs usually have shorter atmospheric lifetimes than those found on particulate. Due to the higher residence time on particulate when compared with the gas phase, direct or assisted photolysis plays a relevant role in the transformation of particle-associated PAHs. Among the other processes taking place in the condensed phase, nitration plays a very important role due to the health impact of nitro-PAHs, some of them being the most powerful mutagens found so far in atmospheric particulate extracts.     

A polarizable continuum model for molecules at diffuse interfaces

In this work we illustrate an extension of the polarizable continuum model to describe solvation effects on molecules at the interface between two fluid phases (liquid/liquid, liquid/vapor). This extension goes beyond the naive picture of the interface as a plane dividing two distinct dielectrics, commonly employed in continuum models. The main feature of the model is the use of a diffuse interface with an electric permittivity depending on the position. This characteristic clearly allows the study of simple interfaces as well as more complex membrane or multilayer structures. Moreover the smooth variation of the permittivity in the diffuse interface, in contrast to the sharp boundary between two regions, overcomes the numerical divergences due to charges placed at the boundary. The implementation of the model relies on the integral equation formalism, which allows one to calculate the reaction field acting on a molecule immersed in a dielectric environment once the proper Green's function is known. In the present case, such a Green's function is obtained numerically, allowing a large flexibility in the choice of the dielectric permittivity profile. The applications have been selected with the aim of illustrating the capabilities of the model; its present limitations are also discussed.     

Chemometric studies in the Lagoon of Venice, Italy. Annual evolution of sulphur species and relationship to biogeochemical cycles in lagoon water

During the period March 1997-March 1998 dimethyl sulphide (DMS), dimethylsulphoniopropionate (DMSP) and carbon disulphide (CS2) were determined weekly in the water of the Lagoon of Venice, Italy (at three stations located in the Giudecca Canal, the San Secondo Canal and the Rio di San Nicolò). At the same time, the following hydrological and biological variables were also measured: tide height, temperature, transmittance, fluorescence, pH, salinity, chlorinity, sulphate, ammonia, nitrite, nitrate, phosphate, silicate, chlorophyll a, phaeopigments, phytoplankton (abundance and biomass). Principal component analysis (PCA), applied as a dimension reduction tool, made it possible to summarize multivariate information in a small number of components, which highlighted the relationships between the temporal evolutions of the sulphur compounds with hydrological and biological variables in the seasonal biogeochemical cycle of the lagoon. In particular the overall temporal cycle, which begins with the development of biological activity in late winter and spring, followed by the predominance of degradation processes during the late summer and the remineralization of nutrients in autumn, is clearly described in the plane of the first two principal components, together with the interrelationships between all the relevant variables.     

Dynamic chemical devices: modulation of photophysical properties by reversible, ion-triggered, and proton-fuelled nanomechanical shape-flipping molecular motions

The terpy-derived (terpy=terpyridine) ligand 1 has an extended W shape in which the two appended photoactive pyrenyl groups are held apart. On binding of a zinc(II) ion with a terpy group, ligand 1 is converted into complex 2 whereby it adopts a U shape, thus stacking the aromatic units. This structural modification leads to a very pronounced change in photophysical properties: from a highly fluorescent free ligand to a very weakly emitting complex. The W/U structural switching can be reversibly induced by the addition of a competitive tren ligand, which binds and releases a zinc(II) ion under protonation/deprotonation cycles, thus leading to oscillations in light emission. Therefore, the present system performs periodic modulation of optical output through a nanomechanical shape-flipping motion, triggered by metal ion binding and fuelled by acid-base neutralisation energy. Overall, it represents an ion-triggered opto-mechanical supramolecular device.     

Determination of creatinine in human serum by short-end injection capillary zone electrophoresis

A new ultra-rapid free-solution capillary zone electrophoresis method to measure serum creatinine is presented. Procedural parameters such as injection mode, concentration and pH of phosphate running buffer and acidic deproteinization of serum samples were investigated. Short-end injection permits a decrease of the analysis time by injecting samples at the outlet end of a silica capillary closest to the detection window, so reducing the migration distance. Thus, when a capillary with an effective length of 10.2 cm and a 40 mmol/L sodium phosphate buffer pH 2.35 was used, the obtained migration time of the creatinine peak was the shortest never described before, about 1.1 min. These conditions give a good reproducibility of the migration times (coefficient of variation, CV% < 0.5) and the peak areas (CV% < 2.8). Intra- and interassay CV were 3.06 and 6.26%, respectively, and analytical recovery was 99.4%. We compared our proposed method to Jaffé colorimetric assay, by measuring serum creatinine in 128 normal subjects. The obtained data were analyzed by the Passing and Bablok regression and Bland-Altman test. Creatinine concentration in healthy subjects was also used to investigate on its relationships with plasma thiols levels.     

Density functional theory investigation of the active site of Fe-hydrogenases. systematic study of the effects of redox state and ligands hardness on structural and electronic properties of complexes related to the [2Fe](H) subcluster

Density functional theory has been used to investigate complexes related to the [2Fe](H) subcluster of [Fe]-hydrogenases. In particular, the effects on structural and electronic properties of redox state and ligands with different sigma-donor pi-acceptor character, which replace the cysteine residue coordinated to the [2Fe](H) subcluster in the enzyme, have been investigated. Results show that the structural and electronic properties of fully reduced Fe(I)Fe(I) complexes are strongly affected by the nature of the ligand L, and in particular, a progressive rotation of the Fe(d)(CO)(2)(CN) group, with a CO ligand moving from a terminal to a semibridged position, is observed going from the softest to the hardest ligand. For the partially oxidized Fe(I)Fe(II) complexes, two isomers of similar stability, characterized either by a CO ligand in a terminal or bridged position, have been observed. The switching between the two forms is associated with a spin and charge transfer between the two iron atoms, a feature that could be relevant in the catalytic mechanism of dihydrogen activation. The structure of the fully oxidized Fe(II)Fe(II) models is extremely dependent on the nature of the L ligand; one CO group coordinated to Fe(d) switches from terminal to bridging position going from complexes characterized by neutral to anionic L ligands.