Liquid chromatographic analysis of vitamin B6 in reconstituted infant formula: collaborative study

A liquid chromatographic (LC) method was validated for the determination of total vitamin B6 in infant formula. Total vitamin B6 was quantified by converting the phosphorylated and free vitamers into pyridoxine. Pyridoxine was determined by ion pair reversed-phase LC with fluorescence detection. The method was subjected to an AOAC collaborative study involving a factory-manufactured, milk- and soy-based infant formula. Each was spiked at 3 concentrations in the range of 0-1 microg/g and sent as blind duplicate to participant laboratories. Nine laboratories returned valid data which were statistically analyzed for outliers and precision parameters. The repeatability relative standard deviation (RSD(r)) ranges were 2.0-4.0 and 3.5-5.9% for fortified milk- and soy-based formulas, respectively. The reproducibility relative standard deviation (RSD(R)) ranges were 8.2-8.4 and 6.7-11.2% for fortified milk- and soy-based formulas, respectively. HORRAT values ranged from 0.42 to 0.53, indicating that the precision of the method is acceptable. The mean RSD(r):RSD(R) values were 0.60 and 0.55 for milk- and soy-based formulas, respectively. As expected, RSDs for the unfortified samples were higher, but their HORRAT values (0.81 and 2.06) helped define a realistic limit of quantitation as 0.05 microg/g. Recovery data were quantitative and varied between 81.4 and 98.0% (mean = 89.8%) for each of 6 spiked materials.     

Is bismuth subsalicylate an effective nontoxic catalyst for plga synthesis?

Poly(d,l ‐lactide‐co‐glycolide) (PLGA) copolyesters are commonly used in biomedical applications. Researches were carried out on nontoxic or low‐toxic catalysts that are enough efficient to provide short polymerization times, adequate microstructure chains and similar properties than the commercial PLGA materials. In this study, PLGA were synthesized by ring‐opening copolymerization (ROP) using three different catalysts. Stannous octoate is the first catalyst we used, as it is very efficient, even its toxicity is still on debate. Two others low‐toxic catalysts [zinc lactate and bismuth subsalicylate (BiSS)] were also evaluated. The comparison of these ROP was realized in terms of kinetics and control of the polymerization. Then, the influence of the catalyst on the PLGA microstructure chains is reported. Finally, abiotic hydrolytic degradation rate is studied. Results described in this article show that BiSS is one very attractive catalyst to produce low toxic PLGA for biomedical applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1130–1138     

Two Years of Pesticides Monitoring in a Belgian Watershed

A monitoring study was carried out in 1998-1999 on a medium-sized (c. 4580 km²) watershed of the Dyle (or Dijle) river in central Belgium, composed of both rural and urbanized areas. This watershed may be considered as representative of a large part of the country. Samples were taken each month from seven sites along the course of the river, plus one from its major affluent the Demer. The eight molecules monitored were the main herbicides used on the major crops in the area, plus some used in nonagricultural sectors. The concentrations found were mostly in the 0-3 μg/L range, with some peaks between 3 and 14 μg/L. The averages over all spring and summer samples analyzed ranged from 0.14 (bentazone) to 1.54 μg/L (diuron). Time and space specific patterns could be observed.     

Influence of trace elements supplementation on the production of recombinant frutalin by Pichia pastoris KM71H in fed-batch process

Frutalin, a galactose-specific lectin used to detect specific tumour markers, is a protein with low expression level in breadfruit. In the present study, fed-batch fermentation in a stirred tank bioreactor was used as a strategy to enhance protein production by a recombinant Pichia pastoris KM71H. By using this process, the production of recombinant frutalin was 4-fold higher than the value obtained in shaker flasks batch assays. Supplementation of the fermentation medium with trace elements (Pichia trace minerals, PTM) was also evaluated in order to stimulate production of the recombinant protein. The addition of PTM to the minimum medium afforded a recombinant protein production of 13.4 mg L^?1, which was 2.5-fold higher than that achieved from the culture medium without PTM supplementation. These results are significant as the development of strategies to improve the production of recombinant frutalin may broaden its application in cancer diagnosis.     

Fuzzy identification of cutting acoustic emission with extended subtractive cluster analysis

This paper presents fuzzy acoustic emission identification in high precision hard turning process based on extended subtractive cluster analysis combined with the least-square estimation method. The fuzzy identification method provides a simple way to arrive at a definite conclusion based upon the information obtained with the difficulty in understanding the exact physics of the machining process. The experimental results prove that the proposed method is efficient and feasible.     

Rheological Behavior and Non-enzymatic Degradation of a Sulfated Galactan from Halymenia durvillei (Halymeniales, Rhodophyta)

The rheological behavior of a sulfated galactan extracted from Halymenia durvillei, a red seaweed collected in the coastal waters of a small island of Madagascar (Nosy-be in Indian Ocean), was investigated in dilute and semi-dilute solutions. In dilute solution with NaCl at 0.3?M, the polysaccharide adopted a coil conformation whereas, at higher concentrations, the polymer had the behavior of shear-thinning fluid, typical of polymer with high molar mass or semi-rigid conformation. Degradations of this lambda carrageenan-like, using radical depolymerization, and high-pressure homogenization led to several samples of various and controlled molar masses. The measure of their intrinsic viscosities permitted the determination of the relationship of Mark?CHouwink?CSakurada.     

ToF-S-SIMS molecular 3D analysis of micro-objects as an alternative to ion beam erosion at large depth: application to single inkjet dots

Molecular depth profiling is needed to develop high-tech materials optimised to the μm or even up to the nm scale. Recent progress in time-of-flight static secondary ion mass spectrometry (ToF-S-SIMS) offers perspectives to molecular depth profiling. However, at this moment, the methodology is not yet capable to deal with a range of materials science applications because of the limited depth range, the loss of intensity in the subsurface and the loss of depth resolution at large distances from the original surface. Therefore, the purpose of this paper is to develop a complementary approach for the molecular 3D analysis at large depth, using a combination of ultra-low angle microtomy (ULAM) and surface analysis of the sectioned material with ToF-S-SIMS. Single inkjet dots with a diameter of 100 μm and height of 22 μm on a PET substrate have been used as a test system for the methodology. It is demonstrated that the use of a diamond knife allows the molecular composition and distribution of components within the microscopic feature to be probed with a lateral resolution of 300 nm. Hence the methodology approaches the physical limit for ion imaging of organic components with local concentrations in the % range. In practice, the achievable depth resolution with ULAM-S-SIMS is ultimately limited by the surface roughness of the section. Careful optimisation of the ULAM step has resulted in a surface roughness within 6 nm (R _a value) at a depth of 21 μm. This offers perspective to achieve 3D analysis with a depth resolution as good as 18 nm at such a large distance from the surface. Furthermore, the ULAM-S-SIMS approach is applicable to materials unamenable to ion beam erosion. However, the method is limited to dealing with, for instance, Si or glass substrates that cannot be sectioned with a microtomy knife. Furthermore, sufficient adhesion between stacked layers or between the coating and substrate is required. However, it is found that the approach is applicable to a wide variety of industrially important (multi)layers of polymers on a polymer substrate.     

Synthesis of Symmetrical and Nonsymmetrical Bisthienylcyclopentenes

Diarylethenes possess unique structural properties, which enabled them to find widespread applications in the field of photochromism. Nowadays, bisthienylcyclopentenes (BTCs) present the most popular subfamily of these compounds, which are widely used as P‐type chromophores. This minireview summarises the main strategies for the synthesis of symmetrical and nonsymmetrical BTCs. In addition, attention is drawn to desymmetrisations achieved by monosubstitutions, which is not frequently utilised, although it can be highly advantageous. This is supported with some of the authors’ latest results.