Transfer hydrogenation processes to mu(3)-alkylidyne groups on the organotitanium oxide [Ti(3)Cp*O(3)

The photochemical treatment of mu(3)-alkylidyne complexes [[TiCp*(mu-O)](3)(mu(3)-CR)] (R=H (1), Me (2), Cp*=eta(5)-C(5)Me(5)) with the amines (2,6-Me(2)C(6)H(3))NH(2), Et(2)NH, and Ph(2)NH and the imine Ph(2)C=NH leads to the partial hydrogenation of the alkylidyne moiety that is supported on the organometallic oxide, [Ti(3)Cp*O(3)], and the formation of new oxoderivatives [[TiCp*(3)(mu-CHR)(R'NR")] (R"=2,6-Me(2)C(6)H(3), R'=H, R=H (3), Me (4); R'=R"=Et, R=H (5), Me (6); R'=R"=Ph, R=H (7), Me (8)) and [[TiCp*(mu-O)](3)(mu-CHR)(N=CPh(2))] (R=H (9), R=Me (10)), respectively. A sequential transfer hydrogenation process occurs when complex 1 is treated with tBuNH(2), which initially gives the mu-methylene [[TiCp*(mu-O)](3)(mu-CH(2))(HNtBu)] (11) complex and finally, the alkyl derivative [[TiCp*(mu-O)](3)(mu-NtBu)Me] (12). Furthermore, irradiation of solutions of the mu(3)-alkylidyne complexes 1 or 2 in the presence of diamines o-C(6)H(4)(NH(2))(2) and H(2)NCH(2)CH(2)NH(2) (en) affords [[TiCp*(mu-O)](3)(mu(3)-eta(2)-NC(6)H(4)NH)] (13) and [[TiCp*(mu-O)](3)(mu(3)-eta(2)-NC(2)H(4)NH)] (14) by either methane or ethane elimination, respectively. In the reaction of 1 with en, an intermediate complex [[TiCp*(mu-O)](3)(mu-CH(2))(NHCH(2)CH(2)NH(2))] (15) is detected by (1)H NMR spectroscopy. Thermal treatment of the complexes 4-10 quantitatively regenerates the starting mu(3)-alkylidyne compounds and the amine R'(2)NH or the imine Ph(2)C=NH; however, heating of solutions of 3 or 4 in [D(6)]benzene or a equimolecular mixture of both at 170 degrees C produces methane, ethane, or both, and the complex [[TiCp*(mu-O)](3)[mu(3)-eta(2)-NC(6)H(3)(Me)CH(2)]] (16). The molecular structure of 8 has been established by single-crystal X-ray analysis.     

Synthesis of novel 1-(2,3-dihydro-5H-4,1-benzoxathiepin-3-yl)-uracil and -thymine, and their corresponding S-oxidized derivatives

On the basis of molecular variations on isosteric replacements from the prototype 1-(2,3-dihydro-5H-1,4-benzodioxepin-3-yl)-5-fluorouracil a series of 3-(2,3-dihydro-5H-4,1-benzoxathiepin-3-yl)-uracil or -thymine O,N-acetals was prepared. The nature of the cis- and trans-sulfoxide isomers was established by means of their conformational analyses carried out with Sybyl and after comparing the theoretical results with the ¹H NMR responses of the target molecules. (RS)-3-(1,1-Dioxo-2,3-dihydro-5H-4,1-benzoxathiepin-3-yl)thymine and (1S*,3S*)-1-(1-oxo-3,5-dihydro-2H-4,1-benzoxathiepin-3-yl)thymine were found to be inhibitors of the MCF-7 cell growth.     

Prediction of H-Bonding Motifs for Pyrazoles and Oximes Using the Cambridge Structural Database

H-bonding motifs for pyrazoles and oximes have been examined in the Cambridge Structural Database. The accessible surface of the N atoms has been found to be useful as a discriminator to divide structures into dimer and catemer motifs for both pyrazoles and oximes. Low accessibility favors dimers and tetramers and high values favor catemers and trimers. Total molecular volume shows some correlation for oximes, while high values favor dimers. Empirical rules were successfully applied to predict the motifs of eight new structures in the subsequent release of the CSD.     

Changes in the reactivity of the fluorescent reagents carbazole-9-carbonyl chloride and 9-carbazolylacetic acid in the presence of cyclodextrins

Carbazole-9-carbonyl chloride (C9CC) and 9-carbazolylacetic acid (9CAA) were selected as model fluorescent reagents. The effect of different chemically modified cyclodextrins (CDs) added to the aqueous solutions of these reagents was studied in water and in buffered aqueous solutions at pH 4.5 and 8.8. The CDs employed were 2-hydroxypropyl-β-cyclodextrin (HP-βCD), 2,3-di-O-methyl-β-cyclodextrin (DM-βCD) and 2,3,6-tri-O-methyl-β-cyclodextrin (TM-βCD). The inclusion of these reagents inside the cavities of the CDs was verified and this process can affect the derivatization reaction because CDs can modify the reactivity of the guest molecules. The basic conditions necessary for the derivatization reaction between C9CC and amines lead to the formation of carbazole anion through hydrolysis followed by decarboxylation. In the presence of CDs, the hydrolysis-decarboxylation of carbazole-9-carbonyl chloride is faster than in buffered aqueous homogeneous solutions. The behaviour observed for these reagents in aqueous solutions of CDs was compared to the one observed in basic ethanolic solutions. These changes are particularly noticeable in the case of 2,3-di-O-methyl-β-CD and 2-hydroxypropyl-β-CD. The characteristics of the fluorescent reagents are compared to carbazole and 9-methylcarbazole as model compounds. This paper was presented at XIIIth International Cyclodextrin Symposium. Torino, Italy, May 14–17, 2006.     

Evaluation of different quantitative approaches for the determination of noneasily ionizable molecules by different atmospheric pressure interfaces used in liquid chromatography tandem mass spectrometry: Abamectin as case of study

The liquid chromatography tandem mass spectroscopy residue determination of compounds without any acidic or basic centers such as abamectin has been investigated. Several approaches regarding the interface used and adduct formation have been compared. The low acidity of the hydroxyl groups only made deprotonation feasible using the atmospheric pressure chemical ionization (APCI) interface. To obtain sufficient sensitivity for residue analysis, the Ion Sabre APCI interface was necessary. However, the sensitivity attained was lower than for monitoring adducts in positive ion mode. Using electrospray ionization, different adducts with Na+, NH4+, and Li+ were tested and compared. The best results were obtained for the ammoniated adduct in electrospray ionization (ESI) because of its high sensitivity and the presence of several product ions with similar abundance. The highest sensitivity was reached using an in-source fragment as precursor ion, leading to a limit of detection (LOD) of 2 microg/L with low relative standard deviation. The relatively high abundance of other transitions allowed abamectin confirmation at concentrations close to the LOD (6 microg/L). Alkali ions were found to be a suitable alternative to determine and confirm abamectin at residue levels. The [M + Na]+ also presented various product ions with similar abundance, which allowed confirmation at LOD levels. However, this LOD was found to be almost four times higher than with [M + NH4]+ because of the poor sensitivity of the transitions obtained. Although the use of Li+ facilitated the fragmentation of the adduct [M + Li]+, with similar sensitivity to [M + NH4]+, this fragmentation preferentially generated only one product ion, which did not allow confirmation at concentration levels lower than 15 microg/L. The use of APCI for monitoring adducts was also feasible, but with less sensitivity. The sensitivity increased with the Ion Sabre APCI, although it was still five times lower than with ESI. Other adduct formers such as Co2+ and Ni2+ also were tested with unsatisfactory results.     

Crystal Structures of Twisted Di(2-Pyridyl)ketone and Planar Azo-di(2-Pyridine) and Their Discussion Based on PM3 Enthalpy Hypersurfaces for the Isoelectronic Molecules

Single crystal structure determinations prove the two pyridine substituents in di(2-pyridyl)ketone (H₄C₄NC)₂C=O to be twisted out of the carbonyl skeleton plane by torsion angles (OCCN) of 41° and –163°, in contrast to their planar arrangement in azo-di(2-pyridine) H₄C₄NC)-N=N-(CNC₄H₄). In order to rationalize the surprising difference between the two isoelectronic molecules, approximate PM3 enthalpy of formation hypersurfaces have been calculated for each of the two ring torsions, which are assumed to be the dominant ones among the 3N – 6 = 60 degrees of freedom. For both the ketone and the azo derivative, global minima are calculated, the torsion angles of which deviate from the crystal structure results, and, therefore, support the assumption that both the experimentally determined twisting of di(2-pyridyl)ketone as well as the flattening of azo-di(2-pyridine) might be affected by the crystal packing.     

Liquid chromatography and tandem mass spectrometry: a powerful approach for the sensitive and rapid multiclass determination of pesticides and transformation products in water

In this paper we will show the results of our research on the direct simultaneous determination of multi-class pesticides and transformation products with different polarities and acid-base properties by applying an on-line trace enrichment coupled to the chromatographic system supplied with electrospray interface (SPE-LC-MS/MS method). The specific chromatographic separation allows the correct determination of almost fifty compounds (37 pesticides and 10 transformation products) using very low sample volume and very little sample handling. Recoveries between 70-120% were obtained for all compounds in drinking and groundwater, meanwhile in surface water 44 compounds were correctly quantified. Relative standard deviations lower than 15% were obtained for all compounds. Even at the lowest concentration level tested (25 ng L(-1)) 40 compounds presented satisfactory recoveries and repeatability. The use of methanol as organic modifier and the increase of injection volume are also studied. The applicability of the developed method to a monitoring programme is demonstrated by applying it to the analysis of hundreds of samples.     

Quantitative determination of formic acid in apple juices by H NMR spectrometry

A quantitative determination method of formic acid in apple juices is proposed by means of the proton nuclear magnetic resonance (¹H NMR) technique. Formic acid gives a singlet signal at the 8.2-8.4 ppm interval of the spectrum, and its area is used to determine the concentration of the acid. 1,3,5-Benzenetricarboxylic acid is added to the juice as an internal standard. Since the chemical shift of both species varies with the pH, ascorbic acid is also added to adjust it at 2.74 and to avoid the overlapping of the signals. Recoveries between 95 and 109% are obtained when the standard addition method is applied to the juices of five different cider apple varieties. The coefficient of variation obtained is 3.9% for intra-day repeatability (n = 5), and 4.6% for inter-day repeatability (n = 10). The limit of detection is 1.49 mg/l, calculated from “3S_y/x + intercept”. The described method is direct and no previous derivatization is needed.     

Pentanuclear Ba(II) complex of a macrocyclic ligand

We report here the first pentanuclear Ba(II) complex of a new tri-aza, tri-oxa macrocycle with two carboxymethyl "arms" pending from two N atoms, H2L2. The crystal structure corresponds to the formula [Ba5(H0.375L2)4(ClO4)(CH3CH2OH)(H2O)2](ClO4)2.5 x 9.5H2O and reveals the presence of four molecules of the ligand surrounding five Ba(II) ions, giving rise to an unusual structure with the metal ions inside a spherical organic cavity.     

The electronic structure of FeV-cofactor in vanadium-dependent nitrogenase

The electronic structure of the active-site metal cofactor (FeV-cofactor) of resting-state V-dependent nitrogenase has been an open question, with earlier studies indicating that it exhibits a broad S = 3/2 EPR signal (Kramers state) having g values of ∼4.3 and 3.8, along with suggestions that it contains metal-ions with valencies [1V³⁺, 3Fe³⁺, 4Fe²⁺]. In the present work, genetic, biochemical, and spectroscopic approaches were combined to reveal that the EPR signals previously assigned to FeV-cofactor do not correlate with active VFe-protein, and thus cannot arise from the resting-state of catalytically relevant FeV-cofactor. It, instead, appears resting-state FeV-cofactor is either diamagnetic, S = 0, or non-Kramers, integer-spin (S = 1, 2 etc.). When VFe-protein is freeze-trapped during high-flux turnover with its natural electron-donating partner Fe protein, conditions which populate reduced states of the FeV-cofactor, a new rhombic S = 1/2 EPR signal from such a reduced state is observed, with g = [2.18, 2.12, 2.09] and showing well-defined ⁵¹V (I = 7/2) hyperfine splitting, a_iso = 110 MHz. These findings indicate a different assignment for the electronic structure of the resting state of FeV-cofactor: S = 0 (or integer-spin non-Kramers state) with metal-ion valencies, [1V³⁺, 4Fe³⁺, 3Fe²⁺]. Our findings suggest that the V³⁺ does not change valency throughout the catalytic cycle.

Active site FeV-cofactor of the V-nitrogenase and the EPR spectrum of the reduced cofactor showing ⁵¹V-hyperfine coupling.