Some new trends in the ionoluminescence of minerals

Ionoluminescence (IL) has mainly been used to detect impurities or defects inside synthetic materials. This paper gives a summary of new applications of IL to natural minerals that might be found in ancient pieces of jewellery or decorative artefacts (affreschi, stucchi, mosaics). Some relevant examples of its use for archaeometrical purposes are given to highlight the potential of the technique. Chemical information can be obtained by luminescent characterization of minerals. IL spectra act as digital imprint for elements or defects inside each material, enabling differentiation of natural specimens from imitations and/or synthetic analogues. Crystal field theory indicates it is the coordination number of the emitter inside the crystalline structure that gives information on its valence. Historical confusion between rubies and red spinel can easily be resolved by analysis of IL spectra. Modern synthetic diamonds can also be discriminated and blue sapphire can be distinguished from blue kyanite, a silicate that is currently being sold as its imitation. The technique can also differentiate between the synthetic and the natural gems. Polymorphs can be identified, and it is possible to recognize minerals from isomorphic series (from the same chemical group with the same structure) even when they share the same light emitter (e.g. Mn²⁺, in carbonates). High-quality glasses (e.g. laser glasses) which are normally used for faking gemstones can be also detected. We fully believe IL will, in the future, be a powerful technique for determining the crystallinity of solids. This paper gives an overview of possible applications of IL to archaeometry for mineral characterization; this is a new application that still requires further study.     

Chemo‐ and Regioselective Palladium‐Catalyzed Oxycyclization Reactions of Allendiols: Preparation of Five‐, Six‐, and Eight‐Membered Cycles

Positive discrimination : Chemo‐ and regioselective palladium‐catalyzed cycloetherification of allendiols, namely β,γ‐ and γ,δ‐allendiols, may occur by judicious choice of palladium‐catalyzed conditions owing to their potential ability to discriminate between both nucleophilic sites (see scheme).

     

Solution SERS of an insoluble synthetic organic pigment-quinacridone quinone-employing calixarenes as dispersive cavitands

A possibility of getting SERS spectra of insoluble aromatic compounds in colloidal silver solutions is described. The method tested for the organic pigment quinacridone quinone consists of dispersing it in calix[n]arenes. The potentials of such cavitands, both as dispersing and as silver functionalization agents, is reported as a function of the substitution in their lower rim and their cavity size.     

Order-disorder at Fe sites in SrFe2/3B″1/3O3 (B″=Mo, W, Te, U) tetragonal double perovskites

We have prepared SrFe_2/3B″_1/3O₃ (B″=Mo, U, Te, and W) double perovskites in polycrystalline form by ceramic methods. Phases with B″=U, Te and W have been studied by X-ray powder diffraction and the results have been compared with neutron diffraction data available for B″=Mo. At room temperature, the stoichiometric samples crystallize in the tetragonal crystal system (space group I4/m, Z=4). Cell parameters when B″=U, Te and W are a=5.6936(1) Å, c=8.0637(1)Å; a=5.5776(1) Å, c=7.9144(3) Å and a=5.5707(3) Å, c=7.9081(5) Å, respectively.The Mössbauer spectra at room temperature for all compounds show hyperfine parameters belonging to two Fe³⁺ sites located at lattice positions with different degrees of distortion. This is in agreement with diffraction data that indicate that the series of compounds display different degrees of Fe-site disorder, which increases in the following sequence: Mo<U<Te<W.     

Effect of the Dispersing Agent on the Electrochemical Response of Glassy Carbon Electrodes Modified with Dispersions of Carbon Nanotubes

The electrochemical response of a glassy carbon electrode modified with carbon nanotubes (CNT) dispersed in two solvents, water and DMF, and two polymers, chitosan and Nafion is reported. The films were homogeneous when the dispersing agent was water or DMF. In the case of polymers, the surfaces present areas with different density of CNTs. A more sensitive electrochemical response was obtained when CNTs are dispersed in the solvents. In the case of CNT dispersed with polymers, the nature of the polymer demonstrated to be a critical parameter not only for dispersing the nanotubes but also for the electrochemical activity of the resulting electrodes.     

Magnetic Hyperthermia Enhancement in Iron-based Materials Driven by Carbon Support Interactions

Magnetic hyperthermia (MH) shows great potential in clinical applications because of its very localized action and minimal side effects. Because of their high saturation magnetization values, reduced forms of iron are promising candidates for MH. However, they must be protected in order to overcome their toxicity and instability (i. e., oxidation) under biological conditions. In this work, a novel methodology for the protection of iron nanoparticles through confinement within graphitic carbon layers after thermal treatment of preformed nanoparticles supported on carbon is reported. We demonstrate that the size and composition of the nascent confined iron nanoparticles, as well as the thickness of their protective carbon layer can be controlled by selecting the nature of the carbon support. Our findings reveal that a higher nanoparticle–carbon interaction, mediated by the presence of oxygen-containing groups, induces the formation of small and well-protected α-Fe-based nanoparticles that exhibit promising results towards MH based on their enhanced specific absorption rate values.     

Indoxyl sulfate- and P-cresol-induced monocyte adhesion and migration is mediated by integrin-linked kinase-dependent podosome formation

Cardiovascular disease is an important cause of death in patients with chronic kidney disease (CKD). Protein-bound uremic toxins, such as p-cresyl and indoxyl sulfate (IS), are poorly removed during hemodialysis, leading to vascular endothelial dysfunction and leukocyte extravasation. These processes can be related to dynamic adhesion structures called podosomes. Several studies have indicated the role of integrin-linked kinase (ILK) in the accumulation of integrin-associated proteins in podosomes. Here, we investigated the involvement of ILK and podosome formation in the adhesion and extravasation of monocytes under p-cresol (pc) and IS exposure. Incubation of THP-1 human monocyte cells with these toxins upregulated ILK kinase activity. Together, both toxins increased cell adhesion, podosome formation, extracellular matrix degradation, and migration of THP-1 cells, whereas ILK depletion with specific small interfering RNAs suppressed these processes. Interestingly, F-actin colocalized with cortactin in podosome cores, while ILK was colocalized in podosome rings under toxin stimulation. Podosome Wiskott-Aldrich syndrome protein (WASP)-interacting protein (WIP) and AKT protein depletion demonstrated that monocyte adhesion depends on podosome formation and that the ILK/AKT signaling pathway is involved in these processes. Ex vivo experiments showed that both toxins induced adhesion and podosome formation in leukocytes from wild-type mice, whereas these effects were not observed in leukocytes of conditional ILK-knockdown animals. In summary, under pc and IS stimulation, monocytes increase podosome formation and transmigratory capacity through an ILK/AKT signaling pathway-dependent mechanism, which could lead to vascular injury. Therefore, ILK could be a potential therapeutic target for the treatment of vascular damage associated with CKD.Subject terms: Experimental models of disease, Atherosclerosis, Mechanisms of disease, Integrins, End-stage renal disease     

Hydrogen Bonding in the Dimer and Monohydrate of 2-Adamantanol: A Test Case for Dispersion-Corrected Density Functional Methods

Weakly-bound intermolecular clusters constitute reductionist physical models for non-covalent interactions. Here we report the observation of the monomer, the dimer and the monohydrate of 2-adamantanol, a secondary alcohol with a bulky ten-carbon aliphatic skeleton. The molecular species were generated in a supersonic jet expansion and characterized using broadband chirped-pulse microwave spectroscopy in the 2–8 GHz frequency region. Two different gauche-gauche O-H···O hydrogen-bonded isomers were observed for the dimer of 2-adamantanol, while a single isomer was observed for the monomer and the monohydrate. The experimental rotational parameters were compared with molecular orbital calculations using density functional theory (B3LYP-D3(BJ), B2PLYP-D3(BJ), CAM-B3LYP-D3(BJ), ωB97XD), additionally providing energetic and electron density characterization. The shallow potential energy surface makes the dimer an interesting case study to benchmark dispersion-corrected computational methods and conformational search procedures.     

Über die Strukturaufklärung von (Hydroxy-oxo-cyclopentenyl)alkansäuren,den Aldolkondensationsprodukten von Dioxoencarbonsäuren aus Rinderleber

Structure Elucidation of (Hydroxy-oxo-cyclopentenyl)alkanoic Acids, the Aldol-Condensation Products of Dioxoene Acids from Cattle Liver During homogenization of cattle liver the highly instable dioxoene acids 13a , 13b , and 13c are formed. These acids cyclize in alkaline solution to yield pairs of stable (hydroxy-oxo-cyclopentenyl)alkanoic acids, which were isolated as methyl esters 4a / 5a , 4b / 5b , and 4c / 5c . The structures of these compounds were deduced from an enriched 3-mg mixture sample by microchemical reactions combined with a GC/MS analysis of the reaction products. Compound 13a was obtained as methyl ester by oxidation of the methyl ester of the corresponding F-acid with NaOCl. It was not possible to isolate 13a in pure form due to its high sensitivity. Instead of the methyl ester of 13a , 4a and 5a were isolated, of which the structures were established.