Kinetics of thermal decomposition of Co3O4 powder and single crystals

Kinetics of thermal decomposition in vacuum of Co₃O₄ powder as well as single crystals has been investigated. Discrepancies with the results of previous authors have been discussed. Decomposition of Co₃O₄ proceeds through formation of a compact layer of CoO and hence diffusion is the rate-limiting factor. The experimental curves α(t) be described for 0.05 < α < 0.85 using a modified Ginstling-Brounshtein equation: 1 ? 2α/3 ? (1 ? α)^2/3 = ktⁿ where the activation energy varies with the degree of decomposition.     

Synthesis of tricyclic phospholene oxides by cycloaddition of phosphorus halides with heterocyclic analogs of 1-vinyl-3,4-dihydronaphthalenes

Replacement of C-4 with a hetero substituent (NR,O,S) in the 1-vinyl-3,4-dihydronaphthalene system has provided a new type of diene for participation in the McCormack cycloaddition reaction with P(III) halides. The tricyclic phospholene oxides so obtained are the first to bear an additional heteroatom in the ring system. 1,2-Dihydro-7-methoxy-1-(p-toluenesulfonyl)-4-vinylquinoline is a stable solid that reacts with methylphosphonous dichloride to give, after hydrolysis of the cycloadduct, the 1,2,4,5-tetrahydro-1H-phospholo-[2,3-c]quinoline ring system. The dihydroquinoline moiety was aromatized by detosylation with potassium t-butoxide. The tendency of 4-vinyl-2H-benzopyran to dimerize was a serious complication in its use, and the cycloaddition with methylphosphonous dichloride proceeded only in low yield. The product, a 2,3,3a,4-tetra-hydrobenzo[3,2-d]pyran derivative, was a stable, easily purified and characterized substance. 4-Vinyl-2H-benzo[b]thiopyran was more stable than the pyran, but the phospholo derivative from reaction with methylphosphonous dichloride was more difficult to purify. All products were characterized by ¹³C-nmr spectroscopy.     

Diamond and diamond-like carbon from a preceramic polymer

The synthesis of poly(hydridocarbyne), one of a class of carbon-based random network polymers and a structural isomer of polyacetlyene, is reported. The network backbone of this polymer is primarily composed of tetrahedrally hybridized carbon atoms, each bearing one hydride substituent and linked via three carbon-carbon single bonds into a three-dimensional random network of fused rings. This atomic-level carbon network backbone confers unusual properties on the polymer, including facile thermal decomposition to form diamond or diamond-like carbon high-quality films at atmospheric pressure, by direct deposition or by chemical vapor deposition (CVD), without the use of hydrogen or any other reagent.     

Crystal and molecular structure, and P N.M.R. characteristics of di-μ-chlorodi(propionyl)bis(dimethylphenylphosphine)diplatinum(III). Trans-influence of ligands in binuclear complexes

The known complex, $\text{trans}$-(η-C₅H₅)₂Rh₂(CO)₂(CF₃C₂CF₃) is formed in high yield from (η-C₅H₅)Rh(CO)₂ and CF₃FCCF₃ at 100°. The less stable $\text{cis}$-isomer of the complex is obtained in low yield from the same reaction. The infrared, ¹H, ¹⁹F and ¹³C NMR spectra of the two isomers are compared. The $\text{trans}$-isomer undergoes CO scrambling in solution at room temperature, and the variable temperature ¹³C NMR spectra are consistent with a pairwise bridge opening and closing mechanism. The mechanism is extended to account for the isomerization of $\text{cis}$ to $\text{trans}$ isomer, whihc has a half-life of 12 h at room temperature. The ¹³C spectrum indicates that the $\text{cis}$-isomer is static in solution at room temperature. The $\text{trans}$-isomer is reversibly protonated by protonic acids, and BF₄^? and PF₆^? salts of the protonated species can be isolated. The spectroscopic properties of these salts are consistent with protonation at one of the alkynyl-carbons, but it is not possible to distinguish between two alternative structures for the complex cation.Treatment of (η-C₅H₅)₂Rh₂(CO)₂(CF₃C₂CF₃) with (η-C₅H₅)Rh(CO)₂ gives the trinuclear complex (η-C₅H₅)₃Rh₃(CO)(CF₃C₂CF₃) in 80% yield. The analogoug but-2-yne complex is formed from (η-C₅H₅)₃Rh₃(CO)₃ and MeCCMe. The infrared, ¹H, ¹⁹F and ¹³C NMR spectra indicate that the hexafluorobut-2-yne complex exists in two different structural arrangements in solution. One has an edge bridging, and the other a face bridging carbonyl. The proportion of the isomers is affected by the solvent polarity. The spectra of the but-2-yne complex indicate it is fluxional at room temperature, and has a face bridging structure in solution regardless of the polarity of the solvent. Reversible protonation of the hexafluorobut-2-yne complex occurs in protonic acids, and the salt [(η-C₅H₅)₃Rh₃(CO)(CF₃C₂CF₃)H]⁺[BF₄]^?,H₂O can be isolated. The spectroscopic properties of this complex are consistent with a structure incorporating an edge-bridging carbonyl, and probably, an edge-bridging hydride ligand.     

Helicity‐Encoded Molecular Strands: Efficient Access by the Hydrazone Route and Structural Features

Control over the folding of molecular strands may be achieved by appropriate choice of the constituting subunits, in particular for chains of specific heterocycles such as sequences of directly connected pyridine (py) and pyrimidine (pym) rings, which are known to fold into extended helical structures. Since the hydrazone (hyz) group represents an isomorphic analogue of a py site, the condensation of hydrazine and carboxaldehyde derivatives of pym offers a very efficient approach to strands incorporating hyz instead of py units and constituted by sequences of alternating hyz and pym groups. A series of such strands of different lengths, up to ten hyz units, i.e., 1 – 7 , were synthesized. Their spectral properties indicate that they fold indeed into helical shapes. Extensive characterization was performed in solution by ¹HNMR spectroscopy and in the solid state by determination of the crystal structures of eight such strands. They all display the expected helical geometry with up to 3 ¹/₃ turns and direct stacking contacts. The efficiency and flexibility of the synthetic approach as well as its wide potential for generation of diversity through lateral decoration make the (hyz? pym) subunit a particularly attractive helicity codon.     

pH sensitivity of Si--C linked organic monolayers on crystalline silicon surfaces.

The electrochemical behavior of Si--C linked organic monolayers is studied in electrolyte-insulator-Si devices, under conditions normally encountered in potentiometric biosensors, to gain fundamental knowledge on the behavior of such Si electrodes under practical conditions. This is done via titration experiments, Mott-Schottky data analysis, and data fitting using a site-binding model. The results are compared with those of native SiO(2) layers and native SiO(2) layers modified with hexamethyldisilazane. All samples display pH sensitivity. The number of Si--OH groups on the alkylated samples is calculated to be less than 0.7 % of that of a pure SiO(2) insulator, which still causes a pH sensitivity of approximately 25 mV per pH unit in the pH range: 4-7. The alkylated samples hardly suffer from response changes during up- and down-going titrations, which indicates that very little oxide is additionally formed during the measurements. The pK(a) values of all samples with monolayers (4.0-4.4) are lower than that of native SiO(2) (6.0). The long-term drift (of approximately 1 mV h(-1)) is moderate. The results indicate that biosensors composed of alkylated Si substrates are feasible if a cross-sensitivity towards pH in the sensor signal is taken into account.     

Effect of conformational changes on a one-electron reduction process: evidence of a one-electron P-P bond formation in a bis(phosphinine)

EPR spectra show that one-electron reduction of bis(3-phenyl-6,6-(trimethylsilyl)phosphinine-2-yl)dimethylsilane (1) on an alkali mirror leads to a radical anion that is localized on a single phosphinine ring, whereas the radical anion formed from the same reaction in the presence of cryptand or from an electron transfer with sodium naphthalenide is delocalized on the two phosphinine rings. Density functional theory (DFT) calculations show that in the last species the unpaired electron is mainly confined in a loose P-P bond (3.479 A), which results from the overlap of two phosphorus p orbitals. In contrast, as attested by X-ray spectroscopy, the P-P distance in neutral 1 is large (5.8 A). As shown by crystal structure analysis, addition of a second electron leads to the formation of a classical P-P single bond (P-P 2.389 A). Spectral modifications induced by the presence of cryptand or by a change in the reaction temperature are consistent with the formation of a tight ion pair that stabilizes the radical structure localized on a single phosphinine ring. It is suggested that the structure of this pair hinders internal rotation around the C-Si bonds and prevents 1 from adopting a conformation that shortens the intramolecular P-P distance. The ability of the phosphinine radical anion to reversibly form weak P-P bonds with neutral phosphinines in the absence of steric hindrance is confirmed by EPR spectra obtained for 2,6-bis(trimethylsilyl)-3-phenylphosphinine (2). Moreover, as shown by NMR spectroscopy, in this system, which contains only one phosphinine ring, further reduction leads to an intermolecular reaction with the formation of a classical P-P bond.     

The magnetic susceptibilities of cobaltocene and chromocene

The magnetic susceptibilities of cobaltocene and chromocene have been measured between 83 and 293 K; for cobaltocene the results suggest an appreciable orthorhombic splitting of the ²∏(σ²πδ⁴ ground state, whilst for chromocene the data provide further support for the ³Δ(σδ³) ground state previously deduced.     

Diethyl benzoylphosphonate as a ligand

Summary Complexes (2 : 1) of diethyl benzoylphosphonate (debp) with 3d metal perchlorates were synthesized and characterized by means of i.r. and electronic spectral, magnetic susceptibility and conductance measurements. In new complexes of the types [M(debp)₂(OClO₃)(OH₂)](ClO₄) (M = Fe, Co, Zn) and [Fe(debp)₂(OClO₃)(OH₂)](ClO₄)₂, both debp ligands function as bidentate chelating agents, coordinating through the P=O and C=O oxygens. In contrast, in the manganese(II) and nickel(II) complexes, which are of the [M(debp)₂(OClO₃)(OH₂)₂](ClO₄) type, one debp acts as a bidentate chelating ligand, while the second debp is unidentate, coordinating only through the P=O oxygen. Hexacoordination in the new cationic complexes is completed by coordination of aqua and unidentate perchlorato ligands, which are in competition for sites in the inner coordination sphere of the central metal ion with the weak debp ligand. On the other hand, debp, owing to its bulkiness, and especially the presence of the benzoyl substituent, introduces sufficiently severe steric hindrance during coordination. As a result of this, the formation of [M(debp)₃]ⁿ⁺ tris-chelate cationic complexes with the 3 d metal ions under study does not seem to be possible.     

Intramolecular Diels-Alder and tandem intramolecular Diels-Alder/1,3-dipolar cycloaddition reactions of 1,3,4-oxadiazoles

The scope of intramolecular Diels-Alder and a novel tandem Diels-Alder/1,3-dipolar cycloaddition cascade of 1,3,4-oxadiazoles is disclosed. In the cases examined, the tandem cycloadditions construct three new rings with formation of four new C-C bonds and set all six stereocenters about a central six-membered ring in a single step including three contiguous and four total quaternary centers without a trace of a second diastereomer.