Alpha Decay of the Neutron-deficient Isotopes 215,216U

The most neutron-deficient isotopes 215;216U were produced in the complete-fusion reaction 180W(40Ar, 4-5n)215,216U. Evaporation residues recoiled from the target were separated in-flight from the primary beam by the gas-filled recoil separator SHANS and subsequently identified on the basis of correlated -decay chains. Two -decaying states were identified in 216U, one for the ground state and the other for the isomeric state with 8+(h9=2f7=2) configuration. The -decay properties for 215;216U and the systematics of 8+ isomeric state in N =124,126 isotones were investigated.     

Electron Impact Excitation of Xenon from the Ground State and the Metastable State to the 5p57p Levels

Electron impact excitation cross sections from the ground state and the lowest metastable state 5p56s J=2 to the excited states of the 5p57p configuration of xenon are calculated systematically using the fully relativistic distorted wave method. Special attention is paid to the configuration interaction effects in the wave-function expansion of target states. The results are in good agreement with the recent experimental data by Jung et al. [Phys. Rev. A 80 （2009） 062708] over the measured energy range. These accurate theoretical results can be used in the modeling and diagnosis of plasmas containing xenon.     

800Hz Terfenol-D鱼唇式弯张换能器

本文研制了800Hz Terfenol-D鱼唇式弯张换能器，换能器设计中采用永磁偏磁场和能有效抑制涡流损耗的闭合磁路结构，最高声源级185dB，-3dB带宽180Hz,这种鱼唇工弯张换能器克服了连续直流提供偏磁场时发热强的缺点，并且仅需要普通的功率放大器，更适于长时间连续工作，使这一新型低频大功率水声换能器趋于实用化。     

求解二维三温辐射热传导方程组的一种网格自适应方法

在求解二维三温辐射热传导方程组的过程中,设计了一类新的基于Hessian矩阵的网格自适应算法.数值实验结果表明,与现在流行的基于一阶导数或通量的网格自适应技术相比,该算法能够大幅改善系统的能量守恒误差,并具有较高的整体计算效率.     

均匀聚焦磁场中束晕-混沌的孤子控制

采用粒子.束核模型,对均匀聚焦磁场中满足K-V分布的离子束进行模拟研究.观察到束晕.混沌现象,基于束晕.混沌的非线性控制策略,提出控制束晕.混沌的孤子函数控制器,并给出具体的实施方案.模拟研究表明,运用这种方法可以消除束晕及其再生现象,达到对束晕.混沌的有效控制.     

氧化镁中子过滤器研究

核电厂反应堆乏燃料水池格架材料在生产和使用过程中需要对其中子吸收性能进行监测和检测,针对这两方面需求,研制了乏燃料水池格架B₄C＿Al材料的中子吸收性能检测设备。为了降低检测过程中超热中子本底的影响,考虑采用氧化镁超热中子过滤器滤除超热中子。对10和5 cm氧化镁单晶的中子透射率与宏观总截面进行了理论计算,对慢化体表面中子成分进行蒙特卡罗模拟计算并开展实验测量。实验结果表明,10 cm氧化镁对采用8 cm聚乙烯慢化后的²⁵²Cf中子源的中子透射率为60.16%,相对镉比值比未加10 cm氧化镁时提高了93.85%,证明常温下采用氧化镁单晶做B₄C＿Al检测装置的超热中子过滤器是可行的。     

A quantum circuit design of AES requiring fewer quantum qubits and gate operations

Advanced Encryption Standard (AES) is one of the most widely used block ciphers nowadays, and has been established as an encryption standard in 2001. Here we design AES-128 and the sample-AES (S-AES) quantum circuits for deciphering. In the quantum circuit of AES-128, we perform an affine transformation for the SubBytes part to solve the problem that the initial state of the output qubits in SubBytes is not the |0>^⊗8 state. After that, we are able to encode the new round sub-key on the qubits encoding the previous round sub-key, and this improvement reduces the number of qubits used by 224 compared with Langenberg et al.’s implementation. For S-AES, a complete quantum circuit is presented with only 48 qubits, which is already within the reach of existing noisy intermediate-scale quantum computers.     

4~20 K 温区固体界面导热填料接触热阻实验研究

超导量子干涉仪、 超导光子探测器等深空探测器需要液氦温区制冷技术提供极低温温度, 固体界面接触热阻的存在会增大耦合界面温度差, 进而增加制冷机系统冷损. 为定量探究4~20 K 深低温区固体接触热阻, 采用GM 作为冷源, 设计了一台可同时调节压力和低温温度的固体界面接触热阻测试实验台. 利用感压纸进行接触界面压力校核, 并对温度重复性进行验证. 实验测试了不同导热介质填充情况下, 温度和压力变化时固体接触热阻的变化规律. 基于最小二乘法对实验数据进行半经验公式拟合, 获得4 ~20 K 温区不同压力加载条件下的接触热阻的定量参考.     

基于组态软件和多串口通讯的真空检漏监测系统设计与开发

许 婕,蔡立君,卢 勇,罗 山,张 龙,田培红     

Electrical, dielectric and surface wetting properties of multi-walled carbon nanotubes/nylon-6 nanocomposites

This paper reports that the multi-walled carbon nanotubes(MWCNT)/nylon-6 (PA6) nanocomposites with different MWCNT loadingshave been prepared by a simple melt-compounding method. Theelectrical, dielectric, and surface wetting properties of theCNT/PA6 composites have been studied. The temperature dependence ofthe conductivity of the CNT/PA6 composite with 10.0 wt{\%} CNTloading ($\sigma _{\rm RT} \sim 10^{-4}$ S/cm) are measured, andafterwards a charge-energy-limited tunnelling model (ln $\sigma (T)\sim T^{-1/2})$ is found. With increasing CNT weight percentage from0.0 to 10.0 wt%, the dielectric constant of the CNT/PA6composites enhances and the dielectric loss tangent increases twoorders of magnitude. In addition, water contact angles of theCNT/PA6 composites increase and the composites with CNT loadinglarger than 2.0 wt%even become hydrophobic. The obtainedresults indicate that the electrical and surface properties of thecomposites have been significantly enhanced by the embedded carbonnanotubes.