Calcium copper-titanate thin film growth: tailoring of the operational conditions through nanocharacterization and substrate nature effects

A novel approach based on a molten multicomponent precursor source has been applied for the MOCVD fabrication of high-quality CaCu(3)Ti(4)O(12) (CCTO) thin films on various substrates. The adopted in situ strategy involves a molten mixture consisting of Ca(hfa)(2).tetraglyme, Ti(tmhd)(2)(O-iPr)(2), and Cu(tmhd)(2) [Hhfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedione; tetraglyme = 2,5,8,11,14-pentaoxapentadecane; Htmhd = 2,2,6,6-tetramethyl-3,5-heptandione; O-iPr = isopropoxide] precursors. Film structural and morphological characterizations have been carried out by several techniques [X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM)], and in particular the energy filtered TEM mapping and X-ray energy dispersive (EDX) analysis in TEM mode provided a suitable correlation between nanostructural properties of CCTO films and deposition conditions and/or the substrate nature. Correlation between the nanostructure and optical/dielectric properties has been investigated exploiting spectroscopic ellipsometry.     

Temperature effect on water intrusion/expulsion in grafted silica gels

Water intrusion-expulsion cycles within a hydrophobic silica gel system were observed at various temperatures. The hysteresis phenomenon revealed an attenuation effect growing with temperature. A simple model derived from the Laplace-Washburn equation made it possible to characterize the observed phenomena both qualitatively and quantitatively. The model involves advancing and receding contact angles increasing with temperature, which influence the hysteresis phenomenon very differently, depending on their value.     

Characterization of volatile organic compounds and odorants associated with swine barn particulate matter using solid-phase microextraction and gas chromatography-mass spectrometry-olfactometry

Swine operations can affect air quality by emissions of odor, volatile organic compounds (VOCs) and other gases, and particulate matter (PM). Particulate matter has been proposed to be an important pathway for carrying odor. However, little is known about the odor-VOCs-PM interactions. In this research, continuous PM sampling was conducted simultaneously with three collocated TEOM 1400a analyzers inside a 1000-head swine finish barn located in central Iowa. Each TEOM was fitted with total suspended particulate (TSP), PM-10, PM-2.5 and PM-1 preseparators. Used filters were stored in 40 mL vials and transported to the laboratory. VOCs adsorbed/absorbed to dust were allowed to equilibrate with vial headspace. Solid-phase microextraction (SPME) Carboxen/polydimethylsiloxane (PDMS) 85 microm fibers were used to extract VOCs. Simultaneous chemical and olfactometry analyses of VOCs and odor associated with swine PM were completed using a gas chromatography-mass spectrometry-olfactometry (GC-MS-O) system. Fifty VOCs categorized into nine chemical function groups were identified and confirmed with standards. Five of them are classified as hazardous air pollutants. VOCs were characterized with a wide range of molecular weight, boiling points, vapor pressures, water solubilities, odor detection thresholds, and atmospheric reactivities. All characteristic swine VOCs and odorants were present in PM and their abundance was proportional to PM size. However, the majority of VOCs and characteristic swine odorants were preferentially bound to smaller-size PM. The findings indicate that a significant fraction of swine odor can be carried by PM. Research of the effects of PM control on swine odor mitigation is warranted.     

Heterobimetallic Zn(II)-Ln(III) phenylene-bridged schiff base complexes, computational studies, and evidence for singlet energy transfer as the main pathway in the sensitization of near-infrared Nd3+ luminescence

A series of 3d-4f heterobimetallic phenylene-bridged Schiff base complexes of the general formula [Zn(mu-L1)Ln(NO3)3(S)n] [Ln = La (1), Nd (2), Gd (3), Er (4), Yb (5); S = H(2)O, EtOH; n = 1, 2; H2L1 = N,N'-bis(3-methoxysalicylidene)phenylene-1,2-diamine] and [Zn(mu-L2)Ln(NO3)3(H2O)n] [Ln = La (6), Nd (7), Gd (8), Er (9), Yb (10); n = 1, 2; H(2)L(2) = N,N'-bis(3-methoxy-5-p-tolylsalicylidene)phenylene-1,2-diamine] were synthesized and characterized. Complexes 1, 2, 4, and 7 were structurally characterized by X-ray crystallography. At room temperature in CH(3)CN, both neodymium(III) (2 and 7) and ytterbium(III) (5 and 10) complexes also exhibited, in addition to the ligand-centered emission in the UV-vis region, their lanthanide(III) ion emission in the near-infrared (NIR) region. The photophysical properties of the zinc(II) phenylene-bridged complexes (ZnL1 and ZnL2) were measured and compared with those of the corresponding zinc(II) ethylene-bridged complexes (ZnL3 and ZnL4). Our results revealed that, at 77 K, both ligand-centered triplet (3LC) and singlet (1LC) states existed for the ethylene-bridged complexes (ZnL3 and ZnL4), whereas only the (1)LC state was detected for the phenylene-bridged complexes (ZnL1 and ZnL2). NIR sensitization studies of [Zn(mu-L')Nd(NO3)3(H2O)n] (L' = L1-L4) complexes further showed that Nd3+ sensitization took place via the 3LC and 1LC states when the spacer between the imine groups of the Schiff base ligand was an ethylene and a phenylene unit, respectively. Ab initio calculations show that the observed differences can be attributed to the difference in the molecular vibrational properties and electron densities of the electronic states between the ethylene- and phenylene-bridged complexes.     

Multidimensional gas chromatographic determination of paraffins, olefins and aromatics in naphthas

In order to cope with the increasing demand for gasoline and the need to reduce environmental impact for sustainable development, refineries have installed refining technology by introducing cracking, reforming, isomerization and alkylation. The standard EN 228: 2004 outlines the specification that gasoline, deriving from the blend of several fractions, must have for use in modem piston engines. Naphtha is one of the products from distilling crude oil that can be used as starting material in the reforming process whose derivatives, which are a fraction of gasoline, depend on the composition of the naphtha. Knowledge of the naphtha composition thus enables to provide the final composition of the products of reforming, the efficiency of the plant and also provides information about the crude oil used. In this paper some naphtha samples were analysed by multidimensional gas chromatography. This technique allows in a single analysis a good separation of the hydrocarbon types and within each hydrocarbon type a good carbon number separation.     

Characterization of volatile organic compounds and odors by in-vivo sampling of beef cattle rumen gas, by solid-phase microextraction, and gas chromatography–mass spectrometry–olfactometry

Volatile organic compounds (VOCs) and odors in cattle rumen gas have been characterized by in-vivo headspace sampling by solid-phase microextraction (SPME) and analysis by gas chromatography–mass spectrometry–olfactometry (GC–MS–O). A novel device enabling headspace SPME (HS-SPME) sampling through a cannula was designed, refined, and used to collect rumen gas samples from steers. A Carboxen–polydimethylsiloxane (PDMS) fiber (85 μm) was used for SPME sampling. Fifty VOCs from ten chemical groups were identified in the rumen headspace. The VOCs identified had a wide range of molecular weight (MW) (34 to 184), boiling point (−63.3 to 292 °C), vapor pressure (1.05 × 10⁻⁵ to 1.17 × 10² Pa), and water solubility (0.66 to 1 × 10⁶ mg L⁻¹). Twenty-two of the compounds have a published odor detection thresholds (ODT) of less than 1 ppm. More than half of the compounds identified are reactive and have an estimated atmospheric lifetime of <24 h. The amounts of VFAs, sulfide compounds, phenolic compounds, and skatole, and the odor intensity of VFAs and sulfide compounds in the rumen gas were all higher after feeding than before feeding. These results indicate that rumen gases can be an important potential source of aerial emissions of reactive VOCs and odor. In-vivo sampling by SPME then GC–MS–O analysis can be a useful tool for qualitative characterization of rumen gases, digestion, and its relationship to odor and VOC formation. Figure Modified cannula for rumen gas sampling with SPME     

Multitrack electrospray chips

Multitrack electrospray chips (MTEC) were fabricated by UV-photoablation of polyethylene terephthalate (PET) substrates. They are composed of an array of up to six microchannels that are successively used as electrospray ionization (ESI) emitters for mass spectrometry (MS). There is no requirement for alignment of the different spraying microchannels with the mass spectrometer orifice. The MTEC is thus fixed in front of the mass spectrometer and the successive MS analyses are performed without moving the chip. The sequential electrospraying by successive application of an identical high voltage in each off-axis microchannel was evaluated for the fast screening of peptides and proteins. The counting of cysteines in peptides through chemical modification and the relative quantification of a peptide in two samples are presented herein as two original strategies based on this new analytical tool.     

Gold(III) Salen complex-catalyzed synthesis of propargylamines via a three-component coupling reaction

[reaction: see text] Propargylamines have been synthesized by a gold(III) salen complex-catalyzed three-component coupling reaction of aldehydes, amines, and alkynes in water in excellent yields at 40 degrees C. With chiral prolinol derivatives as the amine component, excellent diastereoselectivities (up to 99:1) have been attained. This coupling reaction has been applied to the synthesis of propargylamine-modified artemisinin derivatives with the delicate endoperoxide moieties remaining intact. Cytotoxicities with IC(50) values up to 1.1 microM against a human hepatocellular carcinoma cell line (HepG2) were exhibited by these artemisinin derivatives.     

Metal-catalyzed chemoselective cycloisomerization of cis-2,4-dien-1-als to 3-cyclopentenones and 4-alkylidene-3,4-dihydro-2H-pyrans

[reaction: see text] PtCl(2) (5 mol %) catalyst effected cycloisomerization of cis-2,4-dien-1-al (1) to 3-cyclopentenone (3) efficiently in hot toluene. In the presence of p-TSA, this PtCl(2) catalysis gave 2-cyclopentenone (5) exclusively because of the secondary isomerization reaction. Although the 1-2 equilibrium state greatly favors aldehyde (1), PdCl(2)(PhCN)(2) (5 mol %) catalyzed cycloisomerization of aldehyde (1) to 4,6,7,8-tetrahydro-3H-isochromene (4) smoothly in hot toluene. A plausible mechanism is proposed on the basis of reaction observation and isotope-labeled experiment.     

Silsesquioxane-based nanocomposite dendrimers with photo-luminescent and charge transport properties

The synthesis and characterization of octavinylsilsesquioxane (OVS)-based nanocomposite dendrimers with luminescent and charge transport properties are reported. The nanocomposite dendrimers were prepared in high yield using mild Heck chemistry of mono-haloaromatic compounds with the peripheral vinylsilane groups of OVS. Attachment of 2-naphthalene, 2-(9,9-dimethyl)fluorene, and 2-(4-phenyl)-5-(1-naphthyl)-1,3,4-oxadiazole resulted in materials with blue-violet emission (360-380 nm) and photo-luminescent quantum efficiencies (PLQEs) from 1 to 26%. Blue-green emission was observed for attachment of 1-pyrene, 9-anthracene, and N1-(4-phenyl)-N1,N4,N4-triphenylbenzene-1,4-diamine with PLQEs ranging from 23 to 50%. Despite the planar characteristics of the organic dendrons, the nanocomposite dendrimers are completely amorphous and have high glass transition temperatures (Tg) ranging from 115 to 186 degrees C with decomposition temperatures (Td) exceeding 450 degrees C. Matrix-assisted laser desorption ionization-time of flight shows that unlike traditional Heck chemistry, haloaromatic compounds are adding twice across the vinylsilane groups. Finally, organic light emitting diodes using the aromatic amine-based dendrimer as hole injection layers show 55% improvement in device efficiency over traditional materials (5.16 vs. 3.24 cd A(-1)) with brightness levels exceeding 40,000 cd m(-2).