Preparation of polypropylene/ethylene‐propylene‐diene terpolymer/nitrile rubber ternary thermoplastics vulcanizates with good mechanical properties and oil resistance by core‐shell dynamic vulcanization

As the most successful commercialized thermoplastic vulcanizates (TPVs), polypropylene (PP)/ethylene propylene rubber (EPDM) TPVs exhibit poor oil resistance. In this work, we prepared PP/EPDM/butadiene acrylonitrile rubber (NBR) ternary TPVs with good oil resistance using core‐shell dynamic vulcanization. According to the theoretical analysis of the spreading coefficient and the transmission electron microscopy results, the rubber phases exhibited a special core‐shell structure, in which the cross‐linkedNBR‐core was encapsulated by the EPDM‐shell. The core‐shell structure effectively improved the interfacial compatibility between PP and NBR phase as the EPDM‐shell could avoid the direct contact of them, thus improving the mechanical properties of the TPVs. For example, the PP/EPDM/NBR (40/30/30) ternary TPV showed enhanced tensile strength of 12.57 MPa, compared with 10.71 MPa of PP/EPDM (40/60) TPV and 11.11 MPa of PP/NBR (40/60) TPV, respectively. Moreover, the oil resistance of the TPVs was also improved. Compared with PP/EPDM TPV, the change rates in mass, volume, tensile strength and elongation at break of PP/EPDM/NBR TPV after oil immersion decreased by 42.18%, 48.69%, 52.68% and 28.77%, respectively.     

Sequence‐Dependent DNA Functionalization of Upconversion Nanoparticles and Their Programmable Assemblies

DNA‐modified lanthanide‐doped upconversion nanoparticles (DNA‐UCNPs) that combine the functions of DNA and the optical features of UCNPs have shown great promise in a wide range of fields. However, challenges remain in precisely tethering and orienting the DNA strands on the UCNP surface. Herein, we systematically investigate the sequence dependence of DNAs in their interactions with UCNPs, and reveal that poly‐cytosine (poly‐C) has high affinity for the UCNP surface. A general approach to synthesize monodispersed DNA‐UCNP conjugates is developed using poly‐C‐containing diblock DNA strands. The poly‐C segment of the DNA strand binds to the surfaces of UCNPs and the second segment is oriented perpendicularly on the UCNP surface, making the DNA‐UCNPs highly stable and monodispersed in aqueous solution. The dense layer of DNA on the UCNP surface enables the programmable assembly of UCNPs with other DNA‐functionalized nanoparticles or DNA origamis through hybridization, resulting in the formation of well‐organized complex structures.     

A Phototheranostic Strategy to Continuously Deliver Singlet Oxygen in the Dark and Hypoxic Tumor Microenvironment

Continuous irradiation during photodynamic therapy (PDT) inevitably induces tumor hypoxia, thereby weakening the PDT effect. In PDT‐induced hypoxia, providing singlet oxygen from stored chemical energy may enhance the cell‐killing effect and boost the therapeutic effect. Herein, we present a phototheranostic (DPPTPE@PEG‐Py NPs) prepared by using a 2‐pyridone‐based diblock polymer (PEG‐Py) to encapsulate a semiconducting, heavy‐atom‐free pyrrolopyrrolidone‐tetraphenylethylene (DPPTPE) with high singlet‐oxygen‐generation ability both in dichloromethane and water. The PEG‐Py can trap the ¹O₂ generated from DPPTPE under laser irradiation and form a stable intermediate of endoperoxide, which can then release ¹O₂ in the dark, hypoxic tumor microenvironment. Furthermore, fluorescence‐imaging‐guided phototherapy demonstrates that this phototheranostic could completely inhibit tumor growth with the help of laser irradiation.     

A Hydrosilylation Approach to Silicon‐Bridged Functional Dipyrromethanes: Introducing Silicon to A New Arena

Two silylene‐spaced ((E)‐vinylsilyl)anthracene‐dipyrromethane dyads have been designed and synthesized by RhCl(PPh₃)₃‐catalyzed hydrosilylation reactions of 5‐methyl‐5′‐(ethynylaryl)dipyrromethanes with (9‐Anthryl)‐dimethylsilane. The complexation studies of dyads toward different anions have also been performed, which reveal that dyads exhibit a highly selective response towards fluoride anion attributable to both hydrogen‐bonding and pentacoordination phenomena. This dual‐mode fluoride recognition event is unprecedented and may pave the way for future developments in the areas of porphyrinoids, organosilicon, polymer, and supramolecular chemistry.     

General Approach to Single and Hybrid Metal Oxide Fiber Structures for High‐Performance Lithium‐Ion Batteries

Owing to the high specific capacity and energy density, metal oxides have become very promising electrodes for lithium‐ion batteries (LIBs). However, poor electrical conductivity accompanied with inferior cycling stability resulting from large volume changes are the main obstacles to achieve a high reversible capacity and stable cyclability. Herein, a facile and general approach to fabricate SnO₂, Fe₂O₃ and Fe₂O₃/SnO₂ fibers is proposed. The appealing structural features are favorable for offering a shortened lithium‐ion diffusion length, easy access for the electrolyte and reduced volume variation when used as anodes in LIBs. As a consequence, both single and hybrid oxides show satisfactory reversible capacities (1206 mAh g^?1 for Fe₂O₃ and 1481 mAh g^?1 for Fe₂O₃/SnO₂ after 200 cycles at 200 mA g^?1) and long lifespans.     

Palladium‐Catalyzed C−H Iodination of Arenes by Means of Sulfinyl Directing Groups

C?H iodination of aromatic compounds has been accomplished with the aid of sulfinyl directing groups under palladium catalysis. The reaction proceeds selectively at the peri‐position of polycyclic aryl sulfoxides or at the ortho‐position of phenyl sulfoxides. The iodination products can be further converted via iterative catalytic cross‐coupling at the expense of the C?I and C?S bonds. Computational studies suggest that peri‐C?H palladation would proceed via a non‐directed pathway, wherein neither of the sulfur nor oxygen atom of the sulfinyl group coordinates to the palladium before and at the transition state.     

Solvent‐Free Self‐Assembly for Scalable Preparation of Highly Crystalline Mesoporous Metal Oxides

Mesoporous metal oxides (MMOs) have been demonstrated great potential in various applications. Up to now, the direct synthesis of MMOs is still limited to the solvent induced inorganic‐organic self‐assembly process. Here, we develop a facile, general, and high throughput solvent‐free self‐assembly strategy to synthesize a series of MMOs including single‐component MMOs and multi‐component MMOs (e.g., doped MMOs, composite MMOs, and polymetallic oxide) with high crystallinity and remarkable porous properties by grinding and heating raw materials. Compared with the traditional solution self‐assembly process, the avoidance of solvents in this method not only greatly increases the yield of target products and synthesis efficiency, but also reduces the environmental pollution and the consumption of cost and energy. We believe the presented approach will pave a new avenue for scalable production of advanced mesoporous materials for various applications.     

The Stabilization Effect of CO2 in Lithium–Oxygen/CO2 Batteries

The lithium (Li)–air battery has an ultrahigh theoretical specific energy, however, even in pure oxygen (O₂), the vulnerability of conventional organic electrolytes and carbon cathodes towards reaction intermediates, especially O₂^?, and corrosive oxidation and crack/pulverization of Li metal anode lead to poor cycling stability of the Li‐air battery. Even worse, the water and/or CO₂ in air bring parasitic reactions and safety issues. Therefore, applying such systems in open‐air environment is challenging. Herein, contrary to previous assertions, we have found that CO₂ can improve the stability of both anode and electrolyte, and a high‐performance rechargeable Li–O₂/CO₂ battery is developed. The CO₂ not only facilitates the in situ formation of a passivated protective Li₂CO₃ film on the Li anode, but also restrains side reactions involving electrolyte and cathode by capturing O₂^?. Moreover, the Pd/CNT catalyst in the cathode can extend the battery lifespan by effectively tuning the product morphology and catalyzing the decomposition of Li₂CO₃. The Li–O₂/CO₂ battery achieves a full discharge capacity of 6628 mAh g^?1 and a long life of 715 cycles, which is even better than those of pure Li–O₂ batteries.