近场宽带电场耦合天线的高频结构模拟器软件仿真及性能分析

近场宽带电场耦合天线是一种新型的短距离、高速无线通信天线,它是索尼公司力推的近距离高速无线通信技术——.Transferjet^TM的工作天线.使用高频结构模拟器软件,对一种典型的近场宽带电场耦合天线进行了参数化的结构设计;通过仿真模拟,分析短截线的线长和线宽,以及耦合电极的面积对天线中心频率和工作带宽的影响;分析了天线间的距离和夹角,以及耦合电极的面积,对天线传输损耗和性能的影响.设计了一个满足Transferjet^TM技术指标的小尺寸天线,给出了性能仿真结果.     

Growth, Characterization and Theoretical Study of a Novel Organometallic Nonlinear Optical Crystal: CdHg(SCN)4(C2H5NO)2

A novel potentially useful second harmonic generation (SHG) organometallic nonlinear optical (NLO) crystal: cadmium mercury thiocyanate bis(N-methylformamide), CdHg(SCN)₄(C₂H₅NO)₂ (CMTN), has been prepared, and large high-optical-quality single crystals with dimensions up to 30 ×27×9 mm³ have been grown by the temperature-lowering method. Its structural, physicochemical and optical properties are characterized by elemental analyses, X-ray powder diffraction, Fourier transform infrared and Raman spectroscopy, thermal analysis, powder SHG measurements and UV/Vis/NIR transmission. The specific heat has been determined to be 515.5 J?mol^?1?K^?1 at 300 K. CMTN possesses good physicochemical stability up to 128.5^°C, exhibits powder SHG efficiencies 0.8 times that of urea and its UV transparency cutoff is 358 nm. By the use of the DFT/B3LYP/6-31G(d) method, the microscopic second order NLO behavior of CMTN has been investigated by computing the first-order hyperpolarizability together with that of CdHg(SCN)₄ (CMTC) and CdHg(SCN)₄(C₃H₈O₂) (CMTG) crystals. The results have been explained based on their crystal structures.     

Two-dimensional DFB laser fabricated on dye-doped hybrid zirconia film by soft lithography

A two-dimensional(2D) distributed feedback(DFB) structure is fabricated on dye-doped sol-gel derived hybrid zirconia films by soft lithography.The Q-switched Nd:YAG laser(λ = 532 nm) is used to pump these structures.The lasing emissions of the gain medium doped with Rhodamine 6G(Rh6G) in two perpendicular directions are shown,and the threshold pump energy is measured.     

Experimental investigation on a software synchronous optical sampling technique based on periodically poled lithium niobate

A software synchronous optical sampling system is constructed based on sum frequency generation (SFG) in periodically poled lithium niobate (PPLN). Five gigahertz of a non-return-to-zero (NRZ) data signal is sampled by sampling pulse with the repetition frequency of 29.31 MHz. The power of the SFG light is set at 23 dBm, and an eye diagram is successfully recovered. A band-pass filter is added before the sampling pulse is subjected to erbium-doped fiber amplifier to reduce gain competition and ensure a high power level of SFG.     

A highly accurate method to solve Fisher’s equation

In this study, we present a new and very accurate numerical method to approximate the Fisher’s-type equations. Firstly, the spatial derivative in the proposed equation is approximated by a sixth-order compact finite difference (CFD6) scheme. Secondly, we solve the obtained system of differential equations using a third-order total variation diminishing Runge–Kutta (TVD-RK3) scheme. Numerical examples are given to illustrate the efficiency of the proposed method.     

Resonantly pumped continuous wave Er:YAP laser

A continuous wave Er:YAP laser pumped by Mgo:PPLN laser locked at 1535 nm was reported. 170 mW of 1609 nm output was achieved under total incident pump power of 7 W at 77 K. The slope efficiency were 5.0 and 3.1% with the cavity length 75 and 140 mm.     

Latex-mediated synthesis of ZnS nanoparticles: green synthesis approach

A low-cost, green synthesis of ZnS nanoparticles is reported using 0.3 % latex solution prepared from Jatropha curcas L. ZnS nanoparticles were characterized by X-ray diffraction, selected area electron diffraction, transmission electron microscopy, energy dispersive analysis of X-rays, UV–vis optical absorption and photoluminescence techniques. Fourier Transform Infrared Spectroscopy was performed to find the role of cyclic peptides namely curcacycline A (an octapeptide), curcacycline B (a nonapeptide) and curcain (an enzyme) as a possible reducing and stabilizing agents present in the latex of J. curcas L. The average size of ZnS nanoparticles was found to be 10 nm. Latex of J. curcas L. itself acts as a source of sulphide (S⁻²) ions that are donated to Zn ions under present experimental conditions. Source of sulphide (S⁻²) ions is still unclear, but we speculate that cysteine or thiol residues present in enzyme curcain may be donating these sulphide (S⁻²) ions.     

Coupled-channel analysis for 20.4 MeV energy of p-<Superscript>64</Superscript>Zn inelastic scattering

In this study, a coupled-channel (CC) analysis of the elastic and the inelastic scattering of 20.4 MeV polarized protons from a ⁶⁴Zn target leading to the deformed 2⁺, 3−, 2₂⁺2_2^+ states was performed. The CC potential parameters and the deformation parameters of the excited states corresponding to the best fit to the experimental differential cross-sections and the analysing powers data were determined. For 2₂⁺2_2^+ excited state, a mixed type was used and a good fit to the data was provided. The CC calculation results were compared to the pure distorted wave Born approximation (DWBA) calculation results which were calculated using the new parameters. All calculations were conducted using the computer code ECIS06.     

Bifurcations and chaos control in discrete small-world networks

An impulsive delayed feedback control strategy to control period-doubling bifurcations and chaos is proposed. The control method is then applied to a discrete small-world network model. Qualitative analyses and simulations show that under a generic condition, the bifurcations and the chaos can be delayed or eliminated completely. In addition, the periodic orbits embedded in the chaotic attractor can be stabilized.     

Efficient continuous-wave eye-safe region signal output from intra-cavity singly resonant optical parametric oscillator

We report an efficient continuous-wave (CW) tunable intra-cavity singly resonant optical parametric oscillator based on the multi-period periodically poled lithium niobate and using a laser diode (LD) end-pumped CW 1064 nm Nd:YVO₄ laser as the pump source. A highly efficiency CW operation is realized through a careful cavity design for mode matching and thermal stability. The signal tuning range is 1401-1500 nm obtained by varying the domain period. The maximum output power of 2.2 W at 1500 nm is obtained with a 17.1 W 808 nm LD power and the corresponding conversion efficiency is 12.9%.