Confined crystallization of PVDF and a PVDF‐TFE copolymer in nanolayered films

Layer‐multiplying coextrusion was used in conjunction with isothermal recrystallization to study the confined crystallization of polyvinylidene fluoride (PVDF) and polyvinylidene fluoride‐tetrafluoroethylene (PVDF‐TFE) using polycarbonate (PC) and polysulfone (PSF) as confining materials. Three layered systems were produced (PC/PVDF, PSF/PVDF, and PC/PVDF‐TFE) with layer thicknesses ranging from 525 to 28 nm. The crystal morphology was affected by both layer thickness and recrystallization temperature. Specifically, increased recrystallization temperature and decreased layer thickness facilitated the formation of high aspect ratio in‐plane crystals in both PVDF based polymers. On the other side of the spectrum, thicker layers and lower recrystallization temperatures produced on‐edge PVDF crystals and isotropic PVDF‐TFE crystals. The morphology was correlated with oxygen permeability, which decreased by almost two orders of magnitude compared with the bulk. A variety of crystal structures were obtained and explained with nucleation and diffusion theory. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Morphology-to-properties correlations in anodic porous InP layers

In this paper, we investigate the properties of porous structures anodically grown onto n-InP (100) in HCl. In situ electrochemical characterizations show the pore morphology strongly influences the properties of the InP surfaces. Both dc- and ac-electrochemical measurements reveal an enhancement of the capacitive current and a modification of the electronic distribution at the interface. Photocurrent spectra performed during the pore growth are also strongly modified. For low anodic charges, an increase of the photocurrent with a redshift of the absorption edge is measured. These evolutions can be respectively ascribed (i) to a reflection decrease due to a surface roughening and (ii) to the creation of surface states within the band gap. For higher anodic charges, the photocurrent drops with a narrowing of the spectrum. Using a model based on the “dead” layer, the porous layer is considered as an absorbent film that progressively attenuates the photocurrent of the bulk semiconductor.     

Hydrogen electrosorption in nanocrystalline Ti-based alloys

The electrochemical behavior in alkaline solution (1 M NaOH) of nanocrystalline Ti:Ru:Fe:O (2:1:1:2) prepared by high-energy ball milling was studied over its whole electroactivity domain, with a particular emphasis on the hydrogen evolution reaction (her). Comparison has also been made with nanocrystalline Ti:Ru:Fe (2:1:1) and a mixture of Ti:TiO:Ru:Fe₂O₃ (3/2:1/2:1:1/2). It was shown by cyclic voltammetry, open circuit potential decay and chronopotentiometry measurements that hydrogen absorption in the electrode material occurs during hydrogen discharge. The electrochemical behavior of nanocrystalline Ti:Ru:Fe:O (2:1:1:2) closely follows that of Ti:Ru:Fe (2:1:1), but differs radically from that of Ti:TiO:Ru:Fe₂O₃ (3/2:1/2:1:1/2). This is due to the fact that the former two compounds contain a significant fraction of B2 phase (59 and 97 wt.%, respectively), while the latter does not. In steady state conditions, the ratio H/B2 phase in nanocrystalline Ti:Ru:Fe:O (2:1:1:2) is 0.15, about 1.6 times less than that for the O-free nanocrystalline compound. The coefficient of diffusion of hydrogen in nanocrystalline Ti:Ru:Fe:O (2:1:1:2) is 2.6×10⁻¹³ cm² s⁻¹, more than three times less than that in nanocrystalline Ti:Ru:Fe (2:1:1). The difference between the hydrogen absorption characteristics of both nanocrystalline compounds are tracked down to the fact that their B2 phases have different stoichiometries.     

A Copper(I)-Catalyzed Sulfonylative Hiyama Cross-Coupling

An air-tolerant Cu-catalyzed sulfonylative Hiyama cross-coupling reaction enabling the formation of diaryl sulfones is described. Starting from aryl silanes, DABSO and aryliodides, the reaction tolerates a large variety of polar functional groups (amines, ketones, esters, aldehydes). Control experiments coupled with DFT calculations shed light on the mechanism, characterized by the formation of a Cu(I)-sulfinate intermediate via fast insertion of a SO₂ molecule.     

A statistical learning strategy for closed-loop control of fluid flows

This work discusses a closed-loop control strategy for complex systems utilizing scarce and streaming data. A discrete embedding space is first built using hash functions applied to the sensor measurements from which a Markov process model is derived, approximating the complex system’s dynamics. A control strategy is then learned using reinforcement learning once rewards relevant with respect to the control objective are identified. This method is designed for experimental configurations, requiring no computations nor prior knowledge of the system, and enjoys intrinsic robustness. It is illustrated on two systems: the control of the transitions of a Lorenz’63 dynamical system, and the control of the drag of a cylinder flow. The method is shown to perform well.     

The electrochemical preparation of soluble electrically conducting polymers of 3-methoxythiophene with narrow distributions of molecular weight

Solutions of 3-methoxythiophene (MeOT) in dimethylformamide (DMF) were electrolyzed at controlled electrode potentials. The polymerizations were studied under homogeneous conditions in solutions in which the polymer was soluble in the medium, and no coating of the electrodes occurred. The reaction proceeded at high coulombic efficiency and a first order dependence on monomer concentration was observed. The molecular weights of the polymers were determined by gel permeation chromatography. All samples showed a narrow distribution of molecular weights, with M_w/M_n ranging from 1.01 to 1.07. The molecular weight was low (about 3000 Daltons) and did not change in magnitude during the course of the reaction from 10 to 86% conversion, or with change in electrode potential from 1.55 to 1.65 V vs. SCE. The data are interpreted on a model based upon the competitive formation of chemically unreactive bipolarons.     

A 93Nb Solid‐State NMR and Density Functional Theory Study of Four‐ and Six‐Coordinate Niobate Systems

A variable B₀ field static (broadline) NMR study of a large suite of niobate materials has enabled the elucidation of high‐precision measurement of ⁹³Nb NMR interaction parameters such as the isotropic chemical shift (δ_iso), quadrupole coupling constant and asymmetry parameter (C_Q and η_Q), chemical shift span/anisotropy and skew/asymmetry (Ω/Δδ and κ/η_δ) and Euler angles (α, β, γ) describing the relative orientation of the quadrupolar and chemical shift tensorial frames. These measurements have been augmented with ab initio DFT calculations by using WIEN2k and NMR‐CASTEP codes, which corroborate these reported values. Unlike previous assertions made about the inability to detect CSA (chemical shift anisotropy) contributions from Nb^V in most oxo environments, this study emphasises that a thorough variable B₀ approach coupled with the VOCS (variable offset cumulative spectroscopy) technique for the acquisition of undistorted broad (?1/2?+1/2) central transition resonances facilitates the unambiguous observation of both quadrupolar and CSA contributions within these ⁹³Nb broadline data. These measurements reveal that the ⁹³Nb electric field gradient tensor is a particularly sensitive measure of the immediate and extended environments of the Nb^V positions, with C_Q values in the 0 to >80 MHz range being measured; similarly, the δ_iso (covering an approximately 250 ppm range) and Ω values (covering a 0 to approximately 800 ppm range) characteristic of these niobate systems are also sensitive to structural disposition. However, their systematic rationalisation in terms of the Nb? O bond angles and distances defining the immediate Nb^V oxo environment is complicated by longer‐range influences that usually involve other heavy elements comprising the structure. It has also been established in this study that the best computational method(s) of analysis for the ⁹³Nb NMR interaction parameters generated here are the all‐electron WIEN2k and the gauge included projector augmented wave (GIPAW) NMR‐CASTEP DFT approaches, which account for the short‐ and long‐range symmetries, periodicities and interaction‐potential characteristics for all elements (and particularly the heavy elements) in comparison with Gaussian 03 methods, which focus on terminated portions of the total structure.