Near-field optical characterization of interacting and non-interacting gold nanoparticles embedded in a silica thin film

By near-field optics, we characterized the local optical properties of clusters of gold nanoparticles randomly distributed under a 50 nm-thick SiO₂ thin film. A local field enhancement is visible above isolated clusters. A few hundred nanometers away from them, we observed a polarization-dependent pattern with elliptical lobes oriented in the incident polarization direction. A simple simulation shows that the observed near-field images can be represented by the sum of the field of an oscillating dipole and the incident field. When the cluster density is larger, the measured near-field images show numerous bright and dark spots. The position of the bright spots does not necessarily coincide with the gold clusters showing the presence of coupling effects between them.     

Realization of single-mode telluride rib waveguides for mid-IR applications between 10 and 20 μm

The feasibility of all-telluride integrated optics devices based on waveguides presenting a single-mode behavior in the spectral range (10-20 μm) is demonstrated. These waveguides are constituted of a several micrometer thick Te(82)Ge(18) film deposited onto a Te(75)Ge(15)Ga(10) bulk glass substrate by thermal coevaporation and further etched by reactive ion etching under the CHF(3)/O(2)/Ar atmosphere. The obtained structures were proven to behave as channel waveguides with a good single-mode transmission over the whole spectral range. These results allowed validating our technological solution for the fabrication of integrated optics modal filters for spatial interferometry.     

Solving a robotic assembly line balancing problem using efficient hybrid methods

In this paper we are studying a robotic assembly line balancing problem. The goal is to maximize the efficiency of the line and to balance the different tasks between the robots by defining the suitable tasks and components to assign to each robot. We are interested in a robotic line which consists of seizing the products on a moving conveyor and placing them on different location points. The performances evaluations of the system are done using a discret event simulation model. This latter has been developed with C++ language. As in our industrial application we are bounded by the execution time, we propose some resolution methods which define the suitable component and point positions in order to define the strategy of pick and place for each robot. These methods are based on the ant colony optimization, particle swarm optimization and genetic algorithms. To enhance the quality of the developed algorithms and to avoid local optima, we have coupled these algorithms with guided local search. After that, an exact method based on full enumeration is also developed to assess the quality of the developed methods. Then, we try to select the best algorithm which is able to get the best solutions with a small execution time. This is the main advantage of our methods compared to exact methods. This fact represents a great interest taking in consideration that the selected methods are used to manage the functioning of real industrial robotic assembly lines. Numerical results show that the selected algorithm performs optimally for the tested instances in a reasonable computation time and satisfies the industrial constraint.     

Effect of biaxial orientation on dielectric and breakdown properties of poly(ethylene terephthalate)/poly(vinylidene fluoride‐co‐tetrafluoroethylene) multilayer films

Polymer films with enhanced dielectric and breakdown properties are essential for the production of high energy density polymer film capacitors. By capitalizing on the synergistic effects of forced assembly nanolayer coextrusion and biaxial orientation, polymer multilayer films using poly(ethylene terephthalate) (PET) and a poly(vinylidene fluoride‐co‐tetrafluoroethylene) [P(VDF‐TFE)] copolymer were produced. These films exhibited breakdown fields, under a divergent field using needle/plane electrodes, as high as 1000 kV mm^?1. The energy densities of these same materials, under a uniform electric field measured using plane/plane electrodes, were as high as 16 J cm^?3. The confined morphologies of both PET and P(VDF‐TFE) were correlated to the observed breakdown properties and damage zones. On‐edge P(VDF‐TFE) crystals induced from solid‐state biaxial stretching enhanced the effective P(VDF‐TFE) layer dielectric constant and therefore increased the dielectric contrast between the PET and P(VDF‐TFE) layers. This resulted in additional charge buildup at the layer interface producing larger tree diameters and branches and ultimately increasing the breakdown and energy storage properties. In addition to energy storage and breakdown properties, the hysteresis behavior of these materials was also evaluated. By varying the morphology of the P(VDF‐TFE) layer, the low‐field dielectric loss (or ion migration behavior) could be manipulated, which in turn also changed the observed hysteresis behavior. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 882–896     

Lossless strip-to-slot waveguide transformer

We present a highly efficient integratable waveguide transformer that is capable of converting Gaussian-like waveguide modes to much more complicated non-Gaussian-like slot-waveguide modes, and vice versa. The structure consists of several pairs of complementary tapers capable of making this mode conversion virtually lossless. The capability of extremely low-loss mode transformation between these two classes of waveguides has been demonstrated by means of single- and double-slot transformers. Our simulation has shown that the total transformation losses are less than 0.01 and 0.02 dB per transformer, respectively, and can be easily achieved, with a total device length of less than 100 microm.     

Justification of the kinematic assumptions for thin-walled rods with shallow profile

In this Note we present a justification of the kinematic assumptions for thin-walled rods with shallow profile. These assumptions are fundamental to writing the one-dimensional equilibrium equations for such structures. The obtained kinematics are different from the Vlassov case, which is only valid for strongly curved profiles. They are also different from the that classically used in shell theory. The justification given in this Note is based on an asymptotic approach. To cite this article: L. Grillet et al., C. R. Mecanique 333 (2005).     

Probing the Diastereoselectivity of Staudinger Reactions Catalyzed by N‐Heterocyclic Carbenes

The reaction of ethylphenylketene with 1,3‐dimesitylimidazol‐2‐ylidene (IMes) or 1,3‐dimesitylimidazolin‐2‐ylidene (SIMes) afforded the corresponding azolium enolates in high yields. The two zwitterions were fully characterized by various analytical techniques. Their thermal stabilities were monitored by thermogravimetric analysis and the molecular structure of SIMes ? EtPhC?C?O was determined by means of X‐ray crystallography. A mechanism was proposed to account for the trans‐diastereoselectivity observed in the [2+2] cycloaddition of ketenes and N‐protected imines catalyzed by N‐heterocyclic carbenes and an extensive catalytic screening was performed to test its validity. The steric bulk of the NHC catalyst markedly affected the cis/trans ratio of the model β‐lactam product. The nature of the solvent used to carry out the Staudinger reaction also significantly influenced its diastereoselectivity. Conversely, the nature of the substituent on the N‐sulfonated imine reagent and the reaction temperature were less critical parameters.     

A Bistable Microelectromechanical System Actuated by Spin-Crossover Molecules

We report on a bistable MEMS device actuated by spin-crossover molecules. The device consists of a freestanding silicon microcantilever with an integrated piezoresistive detection system, which was coated with a 140 nm thick film of the [Fe(HB(tz)₃)₂] (tz=1,2,4-triazol-1-yl) molecular spin-crossover complex. Switching from the low-spin to the high-spin state of the ferrous ions at 338 K led to a reversible upward bending of the cantilever in agreement with the change in the lattice parameters of the complex. The strong mechanical coupling was also evidenced by the decrease of approximately 66 Hz in the resonance frequency in the high-spin state as well as by the drop in the quality factor around the spin transition.     

On the crucial importance of the pH for the formation and self-stabilization of protein microgels and strands

Stable suspensions of protein microgels are formed by heating salt-free β-lactoglobulin solutions at concentrations up to about C = 50 g·L(-1) if the pH is set within a narrow range between 5.75 and 6.1. The internal protein concentration of these spherical particles is about 150 g·L(-1) and the average hydrodynamic radius decreases with increasing pH from 200 to 75 nm. The formation of the microgels leads to an increase of the pH, which is a necessary condition to obtain stable suspensions. The spontaneous increase of the pH during microgel formation leads to an increase of their surface charge density and inhibits secondary aggregation. This self-stabilization mechanism is not sufficient if the initial pH is below 5.75 in which case secondary aggregation leads to precipitation. Microgels are no longer formed above a critical initial pH, but instead short, curved protein strands are obtained with a hydrodynamic radius of about 15-20 nm.