Electro-oxidation of carbon monoxide on well-ordered Pt(111)/Sn surface alloys

The electro-oxidation of CO on model platinum-tin alloy catalysts has been studied by ex-situ electrochemical measurements following the preparation of the Pt(111)/Sn(2x2) and Pt(111)/Sn(radical3 x radical3)R30 degrees surfaces. A surface redox couple, which is associated with the adsorption/desorption of hydroxide on the Sn sites, is observed at 0.28 V(RHE)/0.15 V(RHE) in H(2)SO(4) electrolyte on both surfaces. Evidence that it is associated with the adsorption of OH comes from ex-situ photoemission measurements, which indicate that the Sn atoms are in a metallic state at potentials below 0.15 V(RHE) and an oxidized state at potentials above 0.28 V(RHE). Specific adsorption of sulfate anions is not associated with the surface process since there is no evidence from photoemission of sulfate adsorption, and the same surface couple is observed in the HClO(4) electrolyte. CO is adsorbed from solution at 300 K, with saturation coverages of 0.37 +/- 0.05 and 0.2 +/- 0.05 ML, respectively. The adsorbed CO is oxidatively stripped at the potential coincident with the adsorption of hydroxide on the tin sites, viz., 0.28 V(RHE). This strong promotional effect is unambiguously associated with the bifunctional mechanism. The Sn-induced activation of water, and promotion of CO electro-oxidation, is sustained as long as the alloy structure remains intact, in the potential range below 0.5 V(RHE). The results are discussed in the light of the requirements for CO-tolerant platinum-based electrodes in hydrogen fuel cell anode catalysts and catalysts for direct methanol electro-oxidation.     

Polymorphic forms of cilostazol

Two unique conformational polymorphic forms of the compound 6‐[4‐(1‐cyclo­hexyl‐1H‐tetrazol‐5‐yl)­butoxy]‐3,4‐di­hydro­quinolin‐2(1H)‐one (cilostazol), C₂₀H₂₇N₅O₂, have been discovered and characterized using single‐crystal X‐ray structural analysis. A third polymorph also exists, but acceptable crystals could not be obtained. Features of both reported polymorphic structures include a chair conformation of the cyclo­hexyl ring and puckering in the quinolinone ring. The major feature distinguishing the two polymorphic forms is a rotational twisting of the butoxy chain between the tetrazole and quinolinone rings. This difference in conformation influences the intermolecular forces, and hence the packing of the two mol­ecules during crystallization.     

Acrylamide analysis: assessment of results from six rounds of Food Analysis Performance Assessment Scheme (FAPAS) proficiency testing

Six proficiency tests have now been completed in an ongoing program of the UK Food Analysis Performance Assessment Scheme (FAPAS) for the analysis of acrylamide in a range of food matrixes. Homogeneous test material samples were requested by laboratories throughout the world, with 29 to 45 submitting results for each test. Results were analyzed by appropriate statistical procedures, and z-scores were awarded for reported values. In the absence of both legislation and collaborative trial data, the target standard deviation was derived from the Horwitz equation, although it is acknowledged that there is a need to establish a "fit for purpose" target standard deviation specifically for acrylamide analysis. Participants were encouraged to use the analytical method routinely used in their own laboratory and to provide details of their procedure. Close examination of the data submitted indicates that performance is generally acceptable in terms of accuracy. There is no significant difference between results submitted by gas chromatography and liquid chromatography (GC and LC) methods, and no method dependency on the use of internal standards or sample size. However, choice of extraction solvent may be important, with indications that plain water is an acceptable extraction method. There is evidence from the most recent test that direct (underivatized) GC methodology may present problems, but more data are required and this aspect will be monitored in the continuing proficiency testing program.     

Direct determination of calcium,copper, iron,magnesium, manganese and zinc in amniotic fluid samples using inductively coupled plasma-atomic emission spectrometry

An inductively coupled plasma-atomic emission spectrometric method is reported for the determination of calcium, copper, iron, manganese, magnesium and zinc. Samples are introduced directly when a sheath gas device is used. An external calibration procedure is used. The standards are prepared in a matrix composed of 0.5% (w/v) albumin and 0.76% (w/v) sodium chloride. The procedure was evaluated with a standard reference material (NBS SRM 909 Human Serum); all the values obtained are in agreement with the certified values. Results obtained for the determination of zinc, calcium, magnesium, copper, iron and manganese in amniotic fluid samples are reported.     

Some reactions of copper(I) pentafluorothiophenolate as a nucleophile

Several aromatic compounds containing one or two C₆F₅S groups have been prepared by nucleophilic displacement reactions using CuSC₆F₅ in DMF solution. Aromatic iodine or bromine, rather than chlorine of fluorine is replaced by the SC₆F₅ group using CuSC₆F₅. A mechanism is postulated. New compounds prepared include $\text{p}$-(C₆F₆F₅S)₂C₆H₄, $\text{o}$- and $\text{m}$-(C₆F₅S)₂C₆F₄ and $\text{p}$XC₆H₄SC₆F₅(X=C1, NO₂, I, CH₃, CO₂C₂H₅).     

The solid state and solution chemistry of dichlorobis(pyridine)cobalt(II)

The thermal decomposition of dichlorobisquinolinecobalt(II) was investigated. Kinetic analyses were performed on the dynamic and isothermal curves. The dynamic and d.s.c. studies revealed two simultaneously reactions while the isothermal reactions represented single processes. The scheme of thermal decomposition is:

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

Investigation of the metabolic fate of 2-, 3- and 4-bromobenzoic acids in bile-duct-cannulated rats by inductively coupled plasma mass spectrometry and high-performance liquid chromatography/inductively coupled plasma mass spectrometry/electrospray mass spectrometry

Inductively coupled plasma mass spectrometry (ICPMS) has been used to determine the rate and routes of excretion of bromine following the intraperitoneal administration (50 mg kg(-1)) of 2-, 3- and 4-bromobenzoic acids to male bile-duct-cannulated rats. Analysis of urine and bile for (79/81)Br using ICPMS showed that all three bromobenzoic acids were rapidly excreted (82-98%) within 48 h of dosing, primarily via the urine. High-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICPMS) was then used to obtain metabolite profiles for bile and urine. These profiles revealed that extensive metabolism had taken place, with the unchanged bromobenzoic acids forming a minor part of the total of compound-related material detected. Concomitant MS studies, supplemented by alkaline hydrolysis, enabled the identification of the major metabolite of all three of the bromobenzoic acids as a glycine conjugate. Ester glucuronide conjugates were also identified, but formed only a small proportion of total.     

Preparation and lithium doping of gallium oxynitride by ammonia nitridation via a citrate precursor route

Gallium oxynitride, isostructural to hexagonal gallium nitride (h-GaN), was obtained by ammonia nitridation of a precursor prepared from the addition of citric acid to an aqueous solution of gallium nitrate. Gallium oxynitride produced at 750 °C had a small amount of gallium vacancies, and was formulated as (Ga_0.89□_0.11) (N_0.66O_0.34) where the symbol □ stands for gallium vacancy. Both the gallium vacancies and oxygen substituted for nitrogen were randomly distributed within the structure. The amount of vacancies decreased with nitridation temperatures in the range of 750-850 °C. Approximately, 10 at% Li⁺ was doped into the gallium oxynitride, using a similar preparation with the additional presence of lithium nitrate, resulted in the random substitution of Ga³⁺ in an atomic ratio of Li/Ga<1 at 750 °C. Oxygen was codoped with lithium and substituted nitrogen in the wurtzite-type crystal lattice. These substitutions reduced the electrical conductivity in the gallium oxynitride semiconductor. A new oxynitride, Li₂Ga₃NO₄, was also obtained with Li₂CN₂ impurity using similar preparations from a mixture of Li/Ga?1. The crystal structure was isostructural with h-GaN, and was refined as P6₃mc with a=0.31674(1) nm, and c=0.50854(2) nm. The Ga and Li occupancies at the 2b site were refined to be 0.6085 and 0.3915, respectively, assuming that the other 2b site was randomly occupied with 1/5O and 4/5N. When the new compound was washed for over 1 min for the removal of Li₂CN₂ impurities, it was decomposed to a mixture of α-GaOOH and α-LiGaO₂. The as-prepared product with Li/Ga=1 showed the highest intensity in yellow luminescence among the products under excitation at 254 nm.     

Large-scale resonance amplification of optical sensing of volatile compounds with chemoresponsive visible-region diffraction gratings

Micropatterning of the vapochromic charge-transfer salt, [Pt(CNC6H4C10H21)4][Pd(CN)4], on transparent platforms yields transmissive chemoresponsive diffraction gratings. Exposure of the gratings to volatile organic compounds (VOCs) such as chloroform and methanol leads to VOC uptake by the porous material comprising the grating lattice or framework, and a change in the material's complex refractive index, ?. The index change is accompanied by a change in the degree of index contrast between the lattice and the surrounding medium (in this case, air), and a change in the diffraction efficiency of the grating. When a monochromatic light source that is not absorbed by the lattice material is employed as a probe beam, only changes in the real component of ? are sensed. Under these conditions, the grating behaves as a nonselective, but moderately sensitive, sensor for those VOCs capable of permeating the porous lattice material. When a probe color is shifted to a wavelength coincident with the vapochromic charge-transfer transition of the lattice material, the sensor response is selectively amplified by up to 3.5 orders of magnitude, resulting in greatly enhanced sensitivity and some degree of chemical specificity. On the basis of studies at four probe wavelengths, the amplification effect is dominated by resonant changes in the imaginary component of the refractive index. The observed wavelength- and analyte-dependent amplification effects are quantitatively well described by a model that combines a Kramers-Kronig analysis with an effective-medium treatment of dielectric effects.