弱(L_1,L_2)-BLD映射的正则性

本文首先将文［１］中的ＢＬＤ映射推广为弱（Ｌ１，Ｌ２）－ＢＬＤ映射，并证明了如下正则性结果：存在两个可积指数 Ｐ１＝Ｐ１（ｎ，Ｌ１，Ｌ２）＜ｎ＜ｑ１＝ｑ１（ｎ，Ｌ１，Ｌ２），使得对任意弱（Ｌ１，Ｌ２）－ＢＬＤ映射ｆ∈（Ω，Ｒｎ），都有ｆ∈（Ω，Ｒｎ），即ｆ为（Ｌ１，Ｌ２）－ＢＬＤ映射．     

两种方法制备ITO薄膜的红外特性分析

比较了用电束加热蒸发法和直流磁控溅射法制备的氧化锡铟(ITO)薄膜在红外波段的光学特性实验发现,通过直流磁控溅射在常温下制备的ITO薄膜在红外波段折射率稳定、消光系数小,比电子束加热蒸发制备的膜有较高的透过率在波长1550nm附近的透过率可达86%以上,消光系数约为004,方电阻最低为100Ω/□.     

Effects of B′-site transition metal on the properties of double perovskites Sr2FeMO6 (M=Mo, W): B′ 4d-5d system

The crystal structure, magnetic and magnetotransport properties of the variation of B′-site transition metal in Sr₂FeMO₆ (M=Mo, W) with double perovskites structure have been investigated systematically. Measurements of magnetization vs. temperature at H=5 T show that Sr₂FeMoO₆ is a ferromagnet and Sr₂FeWO₆ is an antiferromagnet with T_N∼35 K. Additionally, the large magnetoresistance ratio (MR) of ∼22% (H=3 T) at room temperature (RT) was observed in the Sr₂FeWO₆ compound. However, the Sr₂FeMoO₆ compound did not show any significant MR even at high fields and RT (MR∼1%; H=3 T and 300 K). The implications of these findings are supported by band structure calculations to explain the interaction between the 4d(Mo) and 5d(W) orbitals of transition metal ions and oxygen ions.     

Synthesis of the Ionic Organotin Compounds by the Reaction of PhnSnCl4-n (n=1, 2, 3) with HSCH2COOH

The study of ionic organotin compounds is of current attention owing to their diversified molecular structures and wide range of applications.[1～3] In this paper, we concluded our works on ionic organotin compounds.     

High photosensitivity in cis-polyphenylacetylene films irradiated with 60Co γ-ray

This paper reports that ⁶⁰Co γ-ray irradiation can convert cis-polyphenylacetylene (cis-PPA) films prepared with rare-earth coordination catalysts to highly photosensitive materials. The dependence of the photosensitivity on irradiation dose, preparation methods, and microstructure of the PPA films has been investigated by means of a potential discharge technique. The photosensitivity was enhanced with increasing irradiation dose. The critical dose to produce a light response was 5 × 10³ Gy. The maximum surface potential discharge rate was 618 V/s, and the dark decay was approximately 2 V/s for cis-PPA films irradiated with ⁶⁰Co γ-ray (dose: 2 × 10⁵ Gy). The cis-transoidal-PPA and an electrophotographic photoreceptor device incorporating cis-PPA showed a higher irradiation effect. The structure and properties of ⁶⁰Co γ-ray irradiated rare-earth PPA films are similar to the unirradiated films.     

前缘弯掠斜流转子叶顶间隙流动特性数值分析

本文对前缘弯掠斜流转子叶顶间隙内的流动特性进行了数值分析。结果表明:叶顶间隙气流与主流发生卷吸而生成泄漏涡。泄漏涡作用的区域具有较低的压力分布。在叶片通道内,泄漏涡沿着与转子旋向相反的方向朝相邻叶片的压力面移动。大间隙时的泄漏涡比小间隙时强烈。低流量时泄漏涡的作用区域比高流量时大。在各种流量特性下,叶顶尾缘近吸力面区域都存在着二次间隙流。     

“神龙一号”注入器研制

“神龙一号”注入器是直线感应加速器的束流源，它采用了感应叠加的高压加载方式，包括脉冲功率系统、感应腔、阴阳极杆、绝缘支撑、二极管和束流传输系统等子系统. 在研制中采用了径向绝缘支撑、对中支撑调节系统、类Pierce阴极等先进技术，以及二极管线圈内置和外径为800mm的铁氧体大环等创新. 参数测试显示，3.5MeV注入器达到了世界先进水平.     

A lithium ethyl­ene­diphos­phon­ate containing lithium chains and symmetric hydrogen bonds

In the title compound, catena‐poly[lithium‐μ₃‐ethyl­ene­diphos­phon­ato], [Li(C₂H₇O₆P₂)]_n, the supra­molecular monoclinic (C2/c) structure consists of one‐dimensional lithium chains [Li⋯Li = 2.7036 (8) Å] that are embedded within ethyl­ene­diphosphon­ate anions linked by strong symmetric hydrogen bonds [O⋯O = 2.473 (3) Å]. The Li atoms and the H atom in the symmetric hydrogen bond reside on twofold rotation axes and there is an inversion center at the mid‐point of the C—C bond of the ethylenediphosphonate ligand.     

车前子中多糖含量的测定

采用蒽酮-硫酸法比色测定，用精制车前子多糖测得车前子多糖对葡萄糖的换算因子，对我国同属不同品种的车前子不同采集时间及炮制前后其多糖含量进行了比较研究。结果表明：此测定方法简便可行。供试液在8h内显色稳定，重现性较好，平均回收率为97．8％，RSD=1．41％(n=5)。江西吉安产大粒车前子生品多糖含量在9．15％～9．83％之间，炮制后其多糖含量在6．29％～6.81％之间；南昌新祺周车前GAP标准基地的大粒车前子生品多糖含量为7.85％～8．38％，炮制后其多糖含量为6．01％～6．64％；东北产的小粒车前子生品多糖含量为6．61％，炮制后其多糖含量为6．45％。     

磺酸系双子表面活性剂的合成与分离

用两步法与正交试验得出磺酸系双子表面活性剂合成的优化条件.通过重结晶对中间体和最终产品进行分离提纯.分离出中间体α-磺酸月桂酸(简称α-SLA),测得其熔点为49～50℃,在生物显微镜下观察为透明片状晶体,由红外光谱认证结构.合成并分离出目标产品--聚乙二醇(α-磺酸盐)月桂酸单、双酯(简称α-SLPM和α-SLPD),其中后者为磺酸系双子表面活性剂.红外光谱认证,二者熔点测定值均在300℃以上.