芥子气模拟剂2-氯乙基乙基硫醚的光催化降解

利用连续流动微反、原位红外和GC/MS等手段考察了芥子气模拟剂2-氯乙基乙基硫醚（2-CEES）在P25 TiO2上的光催化降解反应,证实CO2和H2O是这个反应的最终产物.详细的跟踪分析表明,除了CO2和H2O外,在反应的气相混合物中可检测到C2H4、CH3CHO、CH4、CO、HCl和H2S；少量小分子的羧酸、醚和砜；微量C2H5SC2H5、C2H5S2C2H5、C2H5SC2H4Cl和CH2ClCH2Cl等中间产物;在反应后的催化剂表面可检测到C2H5S2C2H5、C2H5SC2H4OH、C4H9S2C2H5和C2H5S2C2H4OH、等物.根据这些结果提出了2-CEES光催化降解的反应机理,推断2-CEES的光催化降解涉及脱氯、C－S键断裂、有机硫化物光聚合和裂解等复杂过程最终转化为CO2和H2O.认为各种硫物种在表面的积聚引起了催化剂的缓慢失活.     

Thermal analysis of composites based on crystalline polymers and metals

Differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and infrared (IR) spectroscopy have been used to examine the chemical and physical changes (crystallinity, accumulation of oxygen-containing groups, etc.) during thermal oxidation of polyethylene, polypropylene and Penton contained in coatings and metalfilled films, taking into account the thickness of the polymer layer and catalytic activity of the metal.

---

Zusammenfassung DSC, thermogravimetrische Analyse (TG) und infrarot (IR) Spektroskopie wurden zur Untersuchung der während der thermischen Oxidation von in Belägen und metallgefüllten Filmen enthaltenem Polyäthylen, Polypropylen und Penton stattfindenden chemischen und physikalischen Veränderungen (Kristallinität, Anhäufung stickstoffhaltiger Gruppen usw.) eingesetzt. Hierbei wurden die Stärke der Polymerschicht und die katalytische Aktivität des Metalls in Betracht genommen.

---

, (, .) , .

     

Mechanical and electrochemical effects on surface convection and on emulsification new criteria

Theoretical and experimental studies of surface instability for charged and polarized interfaces between two immiscible liquids are reviewed. A linear analysis of stability shows the role of mechanical and electrochemical para meters for the onset of interfacial convection. Three cases are studied: 1) For the restored Boltzman distribution in bulk phases, the stability is only governed by the interfacial tension through the composition between mechano-chemicaland electrical contributions to the surface free energy; 2) for the non-restored Boltzman distribution, the stability is also governed by the discontinuity of mechanical quantities (density-viscosity) associated with the discontinuity of electrochemical and electrical quantities (dielectric constant-solute concentration-diffusion coefficient, potential drop); and 3) for concentrated charged and dipolar monolayers, the convection criteria of stability are directly related to the discontinuity of mechanical quantities (density-viscosity) associated with the discontinuity of electrochemical quantities (dielectric constant).Additional experiments on emilsification and demulsification were performed in order to verify this last theoretical prediction.     

A new isoprenyl phenyl ether compound from mangrove fungus

A new isoprenyl phenyl ether, 3-hydroxy-4-(3-methylbut-2-enyloxy)benzoic acid methyl ester (1), together with 4-hydroxybenzoic acid (2), 2-hydroxy-6-methylbenzoic acid (3), and 4-hydroxy-3-methoxybenzoic acid (4) were isolated from Mangrove fungus (No. B60) from the South China Sea. The structures of the compounds were established on the basis of NMR spectroscopic and mass spectrometric data. In the preliminary bioassay, compound 1 exhibited antibacterial and antifungal activities. Compound 1 also inhibited cytotoxicity to the hepG2 cell line with an IC₅₀ value of 10.0 μg/mL. Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 313–314, July–August, 2007.     

Spectrophotometry Determination of Cobalt after Extraction of its Ternary Complex with 3-(4-Phenyl-2-Pyridyl)-5,6-Diphenyl-1,2,4-Triazine and Tetraphenylborate into Molten Naphthalene

The reaction of 3-(4-phenyl-2-pyridyl)-5,6-diphenyl-1,2,4-triazine (PPDT) and tetraphenylborate (TPB) with cobalt (II) has been studied to determine the optimum conditions for the extraction and quantitative spectrophotometry determination of this metal. The ternary complex is extracted into molten naphthalene at pH 3.6–7.4. The solid naphthalene containing the cobalt associated complex is separated by filtration and dissolved in acetonitrile. Beer's law is obeyed in the concentration range 8–140 μg cobalt in 10 ml of acetonitrile solution. The molar absorptivity and sensitivity are 4.2×10³ l·mol^?1·cm^?1 and 0.01408 μg/cm², respectively. The other factors such as pH, amounts of reagents and naphthalene, shaking and standing times, and the effect of diverse ions are studied. The method has been applied to the determination of cobalt in iron steel alloys.     

Low-energy paths for the unimolecular decomposition of CH3OH: a G2M/statistical theory study

The potential energy surface (PES) of the CH3OH system has been characterized by ab initio molecular orbital theory calculations at the G2M level of theory. The mechanisms for the decomposition of CH3OH and the related bimolecular reactions, CH3 + OH and 1CH2 + H2O, have been elucidated. The rate constants for these processes have been calculated using variational RRKM theory and compared with available experimental data. The total decomposition rate constants of CH3OH at the high- and low-pressure limits can be represented by k infinity = 1.56 x 10(16) exp(-44,310/T) s-1 and kAr0 = 1.60 x 10(36) T-12.2 exp(-48,140/T) cm3 molecule-1 s-1, respectively, covering the temperature range 1000-3000 K, in reasonable agreement with the experimental values. Our results indicate that the product branching ratios are strongly pressure dependent, with the production of CH3 + OH and 1CH2 + H2O dominant under high (P > 10(3) Torr) and low (P < 1 atm) pressures, respectively. For the bimolecular reaction of CH3 and OH, the total rate constant and the yields of 1CH2 + H2O and H2 + HCOH at lower pressures (P < 5 Torr) could be reasonably accounted for by the theory. For the reaction of 1CH2 with H2O, both the yield of CH3 + OH and the total rate constant could also be satisfactorily predicted theoretically. The production of 3CH2 + H2O by the singlet to triplet surface crossing, predicted to occur at 4.3 kcal mol-1 above the H2C...OH2 van der Waals complex (which lies 82.7 kcal mol-1 above CH3OH), was neglected in our calculations.     

Synthesis and in Vitro Evaluation of N-[[4-[2-(Carboxyl)-1-Cycloalken-1-yl]Phenyl]Methyl]Imidazoles as Nonpeptide Angiotensin II Receptor Antagonists

A series of nonpeptide angiotensin II receptor antagonists was synthesized via palladium-assisted cross coupling of aryl stannane and cycloalkenyl triflates and subsequent alkylation of silyl-protected imidazole. Our compounds, which have a terminal five- to seven-membered cycloalkenyl ring, are compared to DuPont EXP7711, an N-[(2′-carboxybiphenylyl)methyl]imidazole, which has a terminal phenyl moiety. Physicochemical properties of the compounds, such as lipophilicity, steric bulk, conformation, and the relative spatial proximity of the 2-carboxyl and the middle phenyl, are quantitated by computational chemistry. Potency in terms of binding affinity to AT₁ receptors in rat adrenal glomerulosa and rabbit aorta is maximized when the terminal ring is aromatic.     

FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

Carboxylic Acids from <Emphasis Type="Italic">Phyllanthus urinaria</Emphasis>

Five compounds, terephthalic acid mono-[2-(4-carboxy-phenoxycarbonyl)-vinyl] ester (1), (E)-3-(5′-hydroperoxy-2,2′-dihydroxy[1,1′-biphenyl]-4-yl)-2-propenoic acid (2), 3,4,5-trihydroxybenzoic acid (3), succinic acid (or butanedioic acid) (4), and 2,3,4,5,6-pentahydroxybenzoic acid (5), were isolated from Phyllanthus urinaria. The structures of these compounds were elucidated by means of spectral techniques including IR, MS, and 1D/2D NMR. 1 and 2 are new compounds.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 14–17, January–February, 2005.