妊娠晚期羊水中微量元素测定及其与胎儿生长发育关系的研究

对１０２名足月正常妊娠第一胎的产妇妊娠晚期羊水中６种微量元素（锌、铜、锰、铁、钙、镁）首次进行了测定，并通过对出生新生儿生长发育的监测探讨其与胎儿生长发育的关系。妊娠晚期羊水中６种微量元素含量（±Ｓ／×１０－５）分别为：Ｚｎ２．２９±１．７７，Ｃｕ０．１４±０．１４，Ｍｎ０．１３±０．２３，Ｆｅ３．６９±２．７０，Ｃａ８２．５４±７４．１８，Ｍｇ１８．７１±１１．０９．男女新生儿其母羊水中微量元素含量比较无显著差异，Ｐ≥０．０５．与文献报道中期妊娠羊水中所含微量元素比较有增加趋势．６种微量元素相互关系中．与锌、钙呈正相关外，锌与铜、锰、铁、镁呈负相关．低体重组与低身长组新生儿孕母羊水中锌含量明显低于高体重组和高身长组，有显著差异，Ｐ≤０．０１．铁在高身长组含量增高，与低身长组比较有显著差异，Ｐ≤０．０５．锰于低体重组含量升高，与高体重组比较有显著差异，Ｐ≤０．０１．镁与铜于低身长组含量升高，与高身长组比较有显著差异，Ｐ分别≤０．０５与０．０１．可见高铜、高锰、高镁可致胎儿生长发育迟缓．     

将穆斯堡尔谱应用于煤炭催化液化的研究——Ⅱ.某些变数对铁催化剂转化的影响

在以铁系物为煤液化催化剂的反应中,新生Fe_(1-x)是催化活性物种。Monta no认为煤液化条件下,FeS_2向Fe_(1-x)S转化的过程依赖于反应时间、温度和液化煤种。随着液化反应时间的增长,温度的提高,FeS_2转化率增大。液化反应体系的H_2S气体分压影响着Fe_(1-x)S的化学计量式。本文用穆斯堡尔谱研究了煤在铁系催化液化反应中,几种因素对Fe_(1-x)S生成情况的影响。     

PS-b-P (DMS-stat-VMS)嵌段聚合物的制备及性能

采用活性阴离子聚合方法,以仲丁基锂为引发剂,以苯乙烯、六甲基环三硅氧烷（D3）和2,4,6-三乙烯基-2,4,6-三甲基环三硅氧烷（V3）为反应单体,分步聚合制备了聚苯乙烯-b-聚（二甲基硅氧烷-stat-乙烯基甲基硅氧烷）[PS-b-P（DMS-stat-VMS）]嵌段聚合物.采用傅里叶变换红外光谱、氢核磁共振谱及凝胶渗透色谱对共聚物的化学结构、分子量及分子量分布进行了表征,并通过扫描电子显微镜、原子力显微镜及接触角等测试方法研究了共聚物各链段组分对共聚物形貌及表面亲疏水/油性的影响.结果表明,所制备的共聚物分子量分布较窄,由于各组分性能的差异而呈现出微相分离结构,同时该共聚物保留了PS-b-PDMS原有的表面性质,为设计结构多样性及性能优异的聚硅氧烷共聚物提供了新思路.     

The effect of methyl group on the mechanical properties of hydrophobic association hydrogel

Hydrophobic association hydrogels were fabricated via micellar copolymerization of acrylamide and hydrophobic monomers lauryl (meth)acrylate (LA or LMA) in an aqueous solution of sodium dodecyl sulfate. The effect of methyl groups of hydrophobic monomers on the crosslinking network structure and mechanical behavior of the gels was investigated on the basis of rubber elastic theory. It was found that the LMA-gel exhibited higher effective crosslink density and elastic modulus. The methyl groups of hydrophobic monomers limited the flexibility of the methacrylate backbone in the association domain, which resulted in the increment of chains constraints. With the increase of stretch rate, the dissipated energy of LMA-gel increased more highly than that of LA-gel. In addition, the methyl group hindered the movement of polymer chains, leading to the lower recovery efficiency of dissipated energy for LMA-gel. In contract, the LA-gel exhibited a rapid response to external force, and possessed better elasticity and self-recovery property. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1505–1512     

Synthesis and Properties of PGS-Li Scaffold

Lithium ion-doped polyglycerol sebacate scaffold(PGS)-Li was synthesized by adding lithium ions to polyglycerol sebacate(PGS) during its crosslinking process due to the specific effects of lithium ions on periodontal ligament cells, cementoblasts and the eminent performance of PGS. The molecular mass, composition, structure, porosity, thermal properties, and hydrophilicity of the composite were characterized by gel permeation chromatography(GPC), Fourier transform infrared spectroscopy(FTIR), inductively coupled plasma optical emission spectrometer(ICP-OES), scanning electron microscopy(SEM), X-ray photoelectron spectroscopy(XPS), thermogravimetric analyzer(TGA) and contact angle measurments, and the degradation of the material was evaluated by in vitro degradation experiments. The biological activity of PGS-Li scaffold was detected by calcein-AM staining and cytotoxicity test. The results indicate that PGS-Li scaffold has been successfully synthesized, which has similar composition and structure to PGS, but slightly larger molecular weight. In addition, the porosity and pore size of PGS-Li scaffold ba-sically meet the requirements of engineering scaffold materials and the seaffold shows better performance in terms of hydrophilicity and thermal stability than PGS. In vitro degradation experimental results show that the degradation rate of PGS-Li scaffold is higher than that of PGS. What's more, the results of cytotoxicity test and cell staining show that there is no significant difference in the proliferation and cell morphology of cementoblasts.     

Orlicz 空间的Neumann-Jordan常数

证明了Banach空间X的NeumannJordan常数CNJ(X)<2当且仅当X的(James定义下)非方常数J(X)<2.利用第二作者关于Orlicz 空间的非方常数的估计,求出一类自反Orlicz空间NeumannJordan常数的精确值.     

Externally applied stress sign and film elastic properties effects on brittle film fracture

Rectangular stainless steel samples with TiN film deposited on the front lateral surface were loaded in three-point bending to the maximum normal strain of 6%. Scanning electron microscopy showed that vertical cracks appeared in the tension zone when the tensile strain exceeded 1.5%, while horizontal cracks appeared in the compression zone when the compressive strain exceeded –2.9%. Film cracks in the compressive zone originate from the tensile stress imposed by the plastically deformed substrate due to the Poisson’s expansion. Taking plastic deformation and Poisson’s expansion of the substrate in compression into account, theoretical analysis of normal stress distribution along the cracked film segment in compression is presented. Substrate strain and film elastic properties affect film cracking in the compressive zone. At larger compressive strain, some transverse cracks along with buckling cause the film spallation. The presented method is useful for studying brittle film fracture with variable strain levels in a single sample.     

三元阵被动测距浅海试验及后置处理

为改进三元阵被动测距性能,采用了滑动窗互相关器估计时延,与常规互相关器相比时延估计性能有较大提高;采用的方位和距离的改进计算公式,在近程有很高的测距精度。针对实验结果瑕点多的现象,提出了在线自动跟踪剔除瑕点的方法,能稳健有效自动地筛选出高质量的数据,称之为“圆筛”。并引入了“动态滤波”,将其与“圆筛”结合作为后置处理模块。介绍了浅水、近程的三元阵被动测距海试结果,目标船分别为摩托艇和中型双体船,测距结果与精度为20 cm的差分GPS定位结果比较,表明“圆筛”和“动态滤波”相结合的后置处理方法,可显著改善测距效果。     

稀土对耐候钢夹杂物的变质和耐蚀性能的影响

通过金相光学显微镜、扫描电镜及能谱仪,金相定量图象分析仪、非水电解分离夹杂 ICP方法分析固溶稀土含量、电化学腐蚀性能等分析测试手段研究了稀土在耐候钢中存在的形式、非金属夹杂物的形态、尺寸、分布及对耐蚀性能的影响.     

Fabrication of Predominantly Mn4+‐Doped TiO2 Nanoparticles under Equilibrium Conditions and Their Application as Visible‐Light Photocatalyts

The chemical state of a transition‐metal dopant in TiO₂ can intrinsically determine the performance of the doped material in applications such as photocatalysis and photovoltaics. In this study, manganese‐doped TiO₂ is fabricated by a near‐equilibrium process, in which the TiO₂ precursor powder precipitates from a hydrothermally obtained transparent mother solution. The doping level and subsequent thermal treatment influence the morphology and crystallization of the TiO₂ samples. FTIR spectroscopy and X‐ray photoelectron spectroscopy analyses indicate that the manganese dopant is substitutionally incorporated by replacing Ti⁴⁺ cations. The absorption band edge can be gradually shifted to 1.8 eV by increasing the nominal manganese content to 10 at %. Manganese atoms doped into the titanium lattice are associated with the dominant 4+ valence oxidation state, which introduces two curved, intermediate bands within the band gap and results in a significant enhancement in photoabsorption and the quantity of photogenerated hydroxyl radicals. Additionally, the high photocatalytic performance of manganese‐doped TiO₂ is also attributed to the low oxygen content, owing to the equilibrium fabrication conditions. This work provides an important strategy to control the chemical and defect states of dopants by using an equilibrium fabrication process.