强激光干扰下运动目标热损伤效应的有限元研究

为对空中飞行目标实施合理有效的强激光干扰,需要综合考虑采用的干扰方式、干扰效果以及考虑光斑偏移对干扰效果的影响。以热传导理论为基础,建立了激光辐照下移动目标温度场模型,采用伽辽金法建立了有限元分析模型,采用了等效比热容的方法处理材料的相变过程;并以Ansys软件为仿真平台,对目标在高斯分布的强激光作用下的温度场和热应力进行了综合仿真分析。结果表明,光斑与目标辐照区域的相对偏移对目标表面温度影响较大,对目标纵深破坏效应相对较小,应力变化主要发生在激光辐照区域,应力最大处也会随热源的移动而变化。     

3C-SiC纳米颗粒量子限制效应的实验证据

报道了关于3C—SiC纳米颗粒量子限制效应的实验证据．将电化学腐蚀3C—SiC多晶靶材得到的多孔材料在水溶液中进行超声处理，制备出发光的3C—SiC纳米颗粒溶液．透射电镜实验表明，所得颗粒直径分布在1-6nm范围，光致发光谱实验给出了存在量子限制效应的实验证据．发光范围在440-460nm．SiC纳米颗粒量子限制效应的发现，为该材料在光电子发光器件中的应用提供了重要的实验基础．     

Superhydrophobic Flexible Supercapacitors Formed by Integrating Hydrogel with Functional Carbon Nanomaterials

Main observation and conclusion With the rapid development of the wearable electronics,the flexible supercapacitor with high energy density has attracted more a...     

Thermal and optical properties of highly fluorinated copolymers of methacrylates

Copolymers of pentafluorophenylhexafluoroisopropyl methacrylate (FPPMA) with trifluoroethyl methacrylate (TFEMA) were prepared in THF solution and in bulk using azobisisobutyronitrile as a free radical initiator. The monomer reactivity ratios of TFEMA (M₁) and FPPMA (M₂) were calculated as r₁ = 0.55 and r₂ = 0.07. The refractive indices of poly(TFEMA) and poly(FPPMA) are very similar as 1.435 and 1.430, respectively, at 532 nm, and the copolymer films were transparent. The glass transition temperatures (T_g) of the copolymers were in the range of 80–90°C and showed a negative deviation from the Gordon–Taylor equation. The thermal decomposition temperature (T_d) was increased with the content of FPPMA in copolymers. Low water absorption for 1:1 FPPMA/TFEMA copolymer was detected. Copolymers of FPPMA with hexafluoroisopropyl methacrylate (HFPMA) were also prepared. The monomer reactivity ratios of HFPMA (M₁) and FPPMA (M₂) were calculated as r₁ = 0.43 and r₂ = 0.10. The T_gs of the copolymers were in the range of 88–95°C and showed also a negative deviation from the Gordon–Taylor equation. T_g and T_d of the copolymers were increased with the content of FPPMA. The refractive index of poly(HFPMA) (1.384 at 532 nm) is much lower than that of FPPMA homopolymer, but copolymer films obtained were clear and transparent. Copyright © 2013 John Wiley & Sons, Ltd.     

IPET:测定独个生物大分子三维空间结构的实验方法

蛋白质的动态特性和结构活性对于蛋白质功能的调控具有根本意义。传统的结构确定方法(包括X射线和电子显微镜单颗粒分析技术等)往往需要成千上万不同蛋白质分子的平均信号,因此难以确定蛋白质分子的动态结构。而电子显微断层成像技术是一种对独个生物个体结构从不同的观测角度照相、并计算来恢复该个体的三维结构密度图的方法。传统的冷冻电子断层成像重构方法采用整个大尺寸电镜图像进行重构计算,通常用来研究细菌、细胞切片等大尺寸生物个体在较低分辨率下的结构;由于分辨率的限制,不足以获得小尺寸的蛋白质分子的结构细节。最近,任罡研究小组提出一种独个生物颗粒的电子显微断层成像方法(individual-particle electron tomography,IPET)。该方法通过减小图像尺寸(直至所选区域只包含单个蛋白质分子)的策略,运用提出的FETR(focused electron tomography reconstruction)算法来提高独个大分子重构的分辨率。此方法不需要初始模型和大量分子的平均信号,同时能够容忍一定的测角误差。本文综述了IPET/FETR方法在确定独个分子结构过程中的具体步骤以及如何应用该方法来研究蛋白动态特性和结构变化特征。期望通过该综述和国内同行交流,分享最新的前沿研究,为赶超世界科技前沿的建设添砖加瓦。     

石墨炉原子吸收法测定PU材料中的铬

采用微波消解技术进行样品前处理,建立了石墨炉原子吸收法测定PU材料中铬含量的方法。在波长429.0 nm下,利用石墨炉程序升温测定,狭缝设为0.5 nm,塞曼效应作为背景校正。标准工作曲线线性良好,相关系数r=0.9986,方法检出限为0.051μg/L,测定结果的相对标准偏差为3.78%,加标回收率为92%～120%(n=6)。该方法简便、可行,适用于PU材料中铬的测定。     

Ligand‐Functionalization of BPEI‐Coated YVO4:Bi3+,Eu3+ Nanophosphors for Tumor‐Cell‐Targeted Imaging Applications

In this study, surface‐functionalized, branched polyethylenimine (BPEI)‐modified YVO₄:Bi³⁺,Eu³⁺ nanocrystals (NCs) were successfully synthesized by a simple, rapid, solvent‐free hydrothermal method. The BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs with high crystallinity show broad‐band excitation in the λ=250 to 400 nm near‐ultraviolet (NUV) region and exhibit a sharp‐line emission band centered at λ=619 nm under excitation at λ=350 nm. The surface amino groups contributed by the capping agent, BPEI, not only improve the dispersibility and water/buffer stability of the BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs, but also provide a capability for specifically targeted biomolecule conjugation. Folic acid (FA) and epidermal growth factor (EGF) were further attached to the BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs and exhibited effective positioning of fluorescent NCs toward the targeted folate receptor overexpressed in HeLa cells or EGFR overexpressed in A431 cells with low cytotoxicity. These results demonstrate that the ligand‐functionalized, BPEI‐coated YVO₄:Bi³⁺, Eu³⁺ NCs show great potential as a new‐generation biological luminescent bioprobe for bioimaging applications. Moreover, the unique luminescence properties of BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs show potential to combine with a UVA photosensitizing drug to produce both detective and therapeutic effects for human skin cancer therapy.     

Vitrifolin A: A Norlabdane Diterpenoid from the Fruits of Vitex trifolia Linn. var. simplicifolia Cham

A new norlabdane diterpenoid, named vitrifolin A, was isolated from the fruits of Vitex trifolia Linn. var. simplicifolia Cham. Its structure was elucidated by mean of spectroscopic methods, including HRESIMS, IR, 1D and 2D NMR. The inhibitory effect of vitrifolin A on nitric oxide production in lipopolysaccarideactivated mouse macrophages was also evaluated.     

Oxidant Effect of H2O2 for the Syntheses of Quinoline Derivatives via One-Pot Reaction of Aniline and Aldehyde

A convenient one-pot method for the synthesis of substituted quinolines via the reaction of aniline and aldehyde in the presence of a Lewis acid (AlCl₃) and an oxidant (H₂O₂) has been developed. Hydrogen peroxide was found to promote the reaction by its function as a hydrogen hunter, hindering the formation of by-product N-alkylaniline. The effect of the oxidant on the yield and selectivity was studied. When the molar ratio of aniline, n-butyraldehyde, and H₂O₂ was 1:3:0.5 at 25 °C, the yield of 3-ethyl-2-propylquinoline was improved from 64% (reaction without H₂O₂) to 84% (with H₂O₂), and the quinoline selectivity was improved to almost 100%. Moreover, the reaction time was obviously reduced. The substituent effect was also investigated in this work.