光纤微位移法测量固体线膨胀系数

本文绘出了一种金属固体线膨胀系数的测量方法,即采用光纤位移传感器的方法（光纤微位移法）来测量固体的线膨胀系数．测量了黄铜的线胀系数,分别用逐差法和线性回归法处理了实验数据,并与标准值进行了比较．     

Pogostone Enhances the Antibacterial Activity of Colistin against MCR-1-Positive Bacteria by Inhibiting the Biological Function of MCR-1

The emergence of the plasmid-mediated colistin resistance gene mcr-1 has resulted in the loss of available treatments for certain severe infections. Here we identified a potential inhibitor of MCR-1 for the treatment of infections caused by MCR-1-positive drug-resistant bacteria, especially MCR-1-positive carbapenem-resistant Enterobacteriaceae (CRE). A checkerboard minimum inhibitory concentration (MIC) test, a killing curve test, a growth curve test, bacterial live/dead assays, scanning electron microscope (SEM) analysis, cytotoxicity tests, molecular dynamics simulation analysis, and animal studies were used to confirm the in vivo/in vitro synergistic effects of pogostone and colistin. The results showed that pogostone could restore the bactericidal activity of colistin against all tested MCR-1-positive bacterial strains or MCR-1 mutant–positive bacterial strains (FIC < 0.5). Pogostone does not inhibit the expression of MCR-1. Rather, it inhibits the binding of MCR-1 to substrates by binding to amino acids in the active region of MCR-1, thus inhibiting the biological activity of MCR-1 and its mutants (such as MCR-3). An in vivo mouse systemic infection model, pogostone in combination with colistin resulted in 80.0% (the survival rates after monotherapy with colistin or pogostone alone were 33.3% and 40.0%) survival at 72 h after infection of MCR-1-positve Escherichia coli (E. coli) ZJ487 (blaNDM-1-carrying), and pogostone in combination with colistin led to one or more order of magnitude decreases in the bacterial burdens in the liver, spleen and kidney compared with pogostone or colistin alone. Our results confirm that pogostone is a potential inhibitor of MCR-1 for use in combination with polymyxin for the treatment of severe infections caused by MCR-1-positive Enterobacteriaceae.     

地黄梓醇和乙酰胆碱酯酶作用的分子动力学模拟

梓醇能有效的的改善阿茨海默尔症状,但与乙酰胆碱酯酶(Acetylcholinesterase,AchE)作用的分子机制尚不明晰.本文运用分子动力学模拟、结合自由能的计算和丙氨酸突变扫描的方法研究了两者的结合模式,结果表明:梓醇结合位点为乙酰胆碱酯酶的催化活性中心,并形成3个氢键,结合自由能为-60.59 k J/mol,结合的主要驱动力是范德华力和静电作用力,主要抑制力是极性溶剂化能,Tyr151和Gln176是两者结合的关键氨基酸.这些研究为开发高效的Ach E梓醇类似物抑制剂提供理论支持.     

SiN团簇光电子能谱的指认

应用含时密度泛函理论研究了SiN团簇低能激发态的性质.将计算结果与前人已有的计算结果进行了比较，此外还根据计算得到的低能激发能对SiN^-阴离子的光电子能谱进行了理论指认.研究表明，SiN^-阴离子的基态为¹Σ态，而光电子能谱上的X峰和A峰分别对应于¹Σ→²Σ和¹Σ→²Π的跃迁.研究结果还表明，用含时密度泛函的方法来处理激发态的问题是成功的. 关键词： 团簇 光电子能谱 基态 激发态     

高能X射线源焦斑尺寸的时间分辨诊断

将门控分幅相机与快闪烁晶体结合,构成时间分辨X射线诊断系统,对神龙一号直线感应加速器产生的高能脉冲X射线源焦斑进行了测量,在时间间隔为10 ns的情况下,获得了焦斑尺寸随时间的变化曲线。在此基础上,设计了单像素尺寸为0.78 mm×0.78 mm的LYSO闪烁晶体阵列,并进行了X射线照射晶体阵列发光的初步实验,结果表明该阵列可用于高能X射线源焦斑的时间分辨诊断,并能显著提高成像的空间分辨力。     

用于POF的高性能共振腔发光二极管

提出用AlGaAs材料为n型下DBR,AlGaInP材料为p型上DBR,GaInP/AlGaInP多量子阱为有源区来制备650nm波长的共振腔发光二极管（RCLED）.用传输矩阵法对器件的结构进行了理论设计,并制备了RCLED和普通LED两种结构.测试结果表明,RCLED有更高的发光效率,是普通LED的近1.3倍,当注入电流从3mA增加到30mA时,RCLED的峰值波长只变化了1nm,而普通LED的波长则变化了7nm,且RCLED的光谱半宽窄,远场发散角小. 关键词： 发光二极管 共振腔 金属有机物化学气相淀积     

多峰场负氢离子源磁体布局对等离子体特性影响的数值模拟研究

负氢离子源的研究对于响应国家散裂中子源建设和国际热核聚变实验堆计划的开展都具有十分重要的意义. 由于离子源本身的物理特性导致数值模拟成为不可或缺的研究手段, 基于此, 首先对自主研发的全三维粒子模拟/蒙特卡罗碰撞算法进行阐述, 然后对负氢离子体积过程进行描述, 并在此基础上对中国原子能研究中心的多峰质子源进行了系统仿真, 在引出磁体极性相同和相反两种情形下, 分别对多峰质子源放电特性进行了讨论和分析. 结果显示: 在相反极性下, 两引出磁体附近的磁漂移方向相同且数值较大, 即磁漂移剧烈, 导致电子总数较大且高能电子在特定区域活跃, 进而负氢离子体积产率较高, 即负氢离子在空间呈现Y漂移; 反之, 在相同极性下, 电子约束效果相对较差且负氢离子体积产率较低, 但其空间分布均匀.     

无序度对一维长程关联无序系统中局域化-退局域化转变的影响

对长程幂律关联能量序列进行了修正,使其能体现出无序度在一维长程关联无序系统中的影响,并利用重正化群方法,计算了能反映该系统局域化-退局域化转变的Lyapunov指数.结果表明,在由于关联指数p的影响而在系统中出现的局域化向退局域化的转变中,无序度起着相反的作用.当关联指数p一定而无序度W增大时,系统中心能区范围内由于长程关联而引起的扩展态逐渐向局域态转变.当无序度W增大到某一临界值W_c时,系统中所有本征态均转变为局 关键词： 长程关联 Lyapunov指数 无序度 局域化-退局域化转变     

双层散射介质的单次后向散射光谱分析

从上皮组织的结构特点出发,基于米氏(Mie)散射理论,建立了双层散射介质的单次后向散射光谱的理论模型,该模型通过偏振门屏蔽来自下层的噪声背景,只保留来自上层的单次散射光。计算分析了粒子的形态学参量如平均尺寸及其分布、相对折射率变化时,单次散射光谱的特征。并用傅里叶波形分析法研究了这些参量对单次后向散射光谱曲线形状及其谐波幅值的影响。结果表明,这些只经历了表层粒子单次散射的光谱信号对表层粒子的平均尺寸及其分布、相对折射率具有灵敏性。对光谱曲线波纹结构的幅值、频率,散射强度,光谱谐波的幅值有直接的影响。研究结果对早期癌症的散射光谱特征识别及其特征提取有重要的实用价值。     

Calibrating an optical fiber humidity sensor and applying it in real-time monitoring of relative humidity in fresh concrete

A doubly cladding single-mode fiber humidity sensor is fabricated by agarose. The sensor has an insertion loss of -0.08 dB and a power change of -17.83 dB. The responses of the sensor to a relative humidity （RH） range form 30% to 100% at a temperature range form 25 to 34 ~C are validated. The experiments demonstrate that the absorbability of agarose gel to moisture decreases with increasing RH in measured gas. We propose a calibration method that uses lookup tables and construct a corresponding calibration matrix. Using the sensor, we conduct real-time monitoring of RH in fresh concrete during its hardening nrocess.