基于“慕课”的物理类微课程设计探索

“慕课”起步,微课程先行!鉴于目前微课程设计缺乏规范模式,本文旨在对此进行深入探讨．在微课程设计缺乏充分的理论基础支持的前提下,本文首先利用文献综述法归纳得出微课程的基本特征,据此确定微课程设计原则;其次以此原则为指导,借鉴远程开放教育的设计模式,类比探索出微课程设计的基本模式;最后将这种微课程设计模式应用于物理类课程,并结合物理类课程特点进行实证分析,成功实现了物理类微课程设计．教学实践活动进一步检验了本文构建的微课程设计模式切实可行、效果良好．     

颗粒滚动摩擦系数对堆积特性的影响

为探讨颗粒摩擦系数对堆积特性的影响,利用离散单元法,模拟静摩擦系数固定时,变化滚动摩擦系数对椭球形颗粒堆积角及堆积体的影响.利用自制斜面仪测定了颗粒静摩擦系数,并对滚动摩擦系数与堆积角建立线性方程.结果表明,滚动摩擦系数对颗粒堆积特性有显著影响,颗粒堆积角随滚动摩擦系数增大而增大,边界圆与连续圆间的间隙随滚动摩擦系数增大而减小.依据颗粒堆积过程中旋转动能的变化可以阐述上述结果,建立的滚动摩擦系数与堆积角的线性方程可为具体颗粒物料滚动摩擦系数的获取提供数值测量思路.模拟堆积的过程可为散体物料一些不易测量的参数进行虚拟实验标定.     

Distributed wireless quantum communication networks with partially entangled pairs＊Distributed wireless quantum communication networks with partially entangled pairs＊Distributed wireless quantum communication networks with partially entangled pairs＊Distributed wireless quantum communication networks with partially entangled pairs

Wireless quantum communication networks transfer quantum state by teleportation. Existing research focuses on maximal entangled pairs. In this paper, we analyse the distributed wireless quantum communication networks with partially entangled pairs. A quantum routing scheme with multi-hop teleportation is proposed. With the proposed scheme, is not necessary for the quantum path to be consistent with the classical path. The quantum path and its associated classical path are established in a distributed way. Direct multi-hop teleportation is conducted on the selected path to transfer a quantum state from the source to the destination. Based on the feature of multi-hop teleportation using partially entangled pairs, if the node number of the quantum path is even, the destination node will add another teleportation at itself. We simulated the performance of distributed wireless quantum communication networks with a partially entangled state. The probability of transferring the quantum state successfully is statistically analyzed. Our work shows that multi-hop teleportation on distributed wireless quantum networks with partially entangled pairs is feasible,     

Design and optimization of with low weakly-coupled few-mode fiber nonlinearity

By investigating the influence of the difference of refractive index between core and cladding （nco - ncl）, normalized frequency （V） and core radius （α） on both the intramodal and intermodal nonlinear coefficients （NCs） respectively, we design a novel weakly-coupled four-mode fiber with low nonlinearity. In general, under the premise of ensuring the low NCs between two non-degenerate modes, this design can reduce the intermodal NCs （〈 0.5 W-l·km^-1） between two degenerate modes and optimizes the parameters of differential group delays （DGDs） and chromatic dispersion. The optimized few mode fiber （FMF） is eligible for transmission and mode de-multiplexing in the receiver.     

交通装备售后绩效保障系统控制策略研究

针对装备售后保障逐渐向绩效保障模式转变的趋势,文章研究绩效模式下的交通装备售后保障系统控制策略,分析部件损耗特征并给出不同模拟情境下的最优控制策略;首先,从仓库备件库存出发推导出备件库存水平状态概率分布,并获得如可用度等系统绩效性能指标,然后,建立绩效约束的保障系统优化模型并设计出有效的遗传算法;最后,进行数值实验;结果表明,平均故障间隔时间对保障系统控制策略的影响大,而备件可修复率对保障系统控制策略的影响较小。     

Back focal plane imaging of Tamm plasmons and their coupled emission

The unique optical properties of Tamm plasmons (TPs) – such as flexible wavevector matching conditions including inplane wavevector within the light line, and existing both S‐ and P‐polarized TPs − facilitate them for direct optical excitation. The Tamm plasmon‐coupled emission (TPCE) from a combined photonic–plasmonic structure sustaining both surface plasmons (SPs) and TPs is described in this paper. The sensitivity of TPCE to the emission wavelength and polarization is examined with back focal plane imaging and verified with the numerical calculations. The results reveal that the excited probe can couple with both TPs and SPs, resulting in surface plasmon‐coupled emission (SPCE) and TPCE, respectively. The TPCE angle is strongly dependent on the wavelength allowing for spectral resolution using different observation angles. These Tamm structures provide a new tool to control the optical emission from dye molecules and have many potential applications in fluorescence‐based sensing and imaging.     

先位粉末套管法制备MgB2/Fe线材的超导性能研究

采用先位法将MgB2粉装入纯铁管中,制备出MgB2/Fe超导线材.用X射线衍射仪和扫描电子显微镜分析了样品的物相组成和显微结构;用SQUID测量了样品的超导转变温度;用标准四引线法测量了短样的临界电流.结果显示,超导样品的临界转变温度约为38.3 K,在4.2 K/4 T下MgB2/Fe线材的临界电流密度为～104A/cm2.研究结果表明,高温退火有效地减少了冷加工过程中产生的应力,改善了晶粒连接性,提高了芯材的致密度,可以显著地提高先位法制备线材的临界电流密度.     

Material growth and device fabrication of terahertz quantum-cascade laser based on bound-to-continuum structure

The terahertz quantum-cascade laser （THz QCL） based on bound-to-continuum structure is demonstrated. The X-ray diffraction measurement of the material shows a high crystalline quality of the active region. A THz QCL device was fabricated with semi-insulating surface-plasmon waveguide. The test device is lasing at about 3 THz and operating up to 60 K. It shows a single frequency property under different drive currents and temperatures. At 9 K, the maximum output power is greater than 2 mW with a threshold current density of 159 A/cm2.     

太赫兹波在雾中的多重散射特性

太赫兹(THz)波作为微波和毫米波的延伸,它所提供的通信带宽和容量远大于毫米波。在随机介质中传播时,不但会发生时域和空域的形变,介质中的粒子还会对入射波发生散射,这些都会使得脉冲信号发生衰减。根据Mie理论与随机离散分布粒子的波传播与散射理论,计算了THz波信号入射下雾滴粒子的消光系数。结合雾滴粒子谱分布,得到了雾媒质的平均体系散射特性,采用蒙特卡罗法得到了平流雾对THz信号的多重散射特性,计算了THz波段信号对平流雾的透过率与反射率,分析了THz波段信号的前向、后向散射特性随散射角的分布。结果表明,低能见度大气环境中,雾对THz波产生的吸收和衰减不容忽视。相关研究结果对THz在大气传输、通信等方面的应用具有重要意义。     

紫外成像器件光电阴极封接焊料熔层缺陷对气密性的影响

为解决紫外成像器件光电阴极与管体封接漏气问题,对管体InSn合金熔化过程中出现的质量问题进行了深入分析,找出焊料熔层缺陷主要来源于对焊料除气不彻底和基底表面氧化及设备油污染。通过优化工艺参数,改进工艺质量和把化铟设备管体搁置焊料熔化改为浇铸熔化,使管体焊料熔化合格率达到了100%,光电阴极与管体封接气密性成品率达到98%。