Fabricating UCNPs-AuNPs Fluorescent Probe for Sensitive Sensing Thiamphenicol

Anovel fluorescent probe has been constructed based on fluorescence resonance energy transfer(FRET) between upconversion nanomaterials(UCNPs) NaYF₄:Yb,Er and gold nanoparticles(AuNPs). The fluorescent "off-on" switching was formed for the detection of thiamphenicol(TAP) in egg samples. The fluorescence of UCNPs can be quenched to a certain degree by AuNPs. After adding TAP, the AuNPs generated aggregation and the fluorescence of UCNPs was recovered. The synthesized amination UCNPs and AuNPs were characterized by Fourier transform infrared spectroscopy(FTIR), UV-Vis, X-ray diffraction(XRD), energy dispersive spectrometer(EDS), and transmission electron microscope(TEM) techniques for observation and confirmation. As a model target, the detection of TAP has two linear ranges in the buffer solution within 0.01-0.1 μmol/L and 0.1-1 μmol/L using this fluorescent probe. The detection limit was obtained to be 0.003 μmol/L(S/N=3), which is favorable for trace analysis. The recovery of TAP from 98.2% to 105.3% was obtained, and the relative standard deviation(RSD) was from 2.5% to 4.3%. Furthermore, the method established in this study based on the UCNPs auto-low background fluorescence has high selectivity and strong ability to eliminate interference, which is beneficial to analyzing complex samples.     

Flavonoids from Halostachys caspica and their antimicrobial and antioxidant activities

Seven flavonoids have been isolated from the aerial parts of Halostachys caspica C. A. Mey. (Chenopodiaceae) for the first time. By means of physicochemical and spectrometric analysis, they were identified as luteolin (1), chrysin (2), chrysin 7-O-β-D-glucopyranoside (3), quercetin (4), quercetin 3-O-β-D-glucopyranoside (5), isorhamentin-3-O-β-D-glucopyranoside (6), and isorhamentin-3-O-β-D-rutinoside (7). All flavonoids were evaluated to show a broad antimicrobial spectrum of activity on microorganisms including seven bacterial and one fungal species as well as pronounced antioxidant activity. Among them, the aglycones with relatively low polarity had stronger bioactivity than their glycosides. The results suggested that the isolated flavonoids could be used for future development of antimicrobial and antioxidant agents, and also provided additional data for supporting the use of H. caspica as forage.     

Antimicrobial activity of sphingolipids isolated from the stems of cucumber (Cucumis sativus L.)

Three antimicrobial sphingolipids were separated by bioassay-guided isolation from the chloroform fraction of the crude methanol extract of cucumber (Cucumis sativus L.) stems and identified as (2S,3S,4R,10E)-2-[(2'R)-2-hydroxytetra-cosanoylamino]-1,3,4-octadecanetriol-10-ene (1), 1-O-β-D-glucopyranosyl(2S,3S,4R,10E)-2-[(2'R)-2-hydroxy-tetracosanoylamino]-1,3,4-octadecanetriol-10-ene (2) and soya-cerebroside I (3) by their physicochemical properties and spectroscopic analysis. They were evaluated to show antifungal and antibacterial activity on test microorganisms including four fungal and three bacterial species. Among them, compound 1, a relatively low polarity aglycone, exhibited stronger antimicrobial activity than its corresponding glycoside 2. The results indicated that sphingolipids could be the main antimicrobial compounds in the crude methanol extract of cucumber stems.     

基于调频Z变换的均匀线列阵恒定束宽波束形成器设计

提出了基于调频Z变换(CZT)的宽带恒定束宽波束形成(CBB)方法:假设在每个子带内,各方位波束的权系数相同,推导得到:每个频率子带的权系数序列与参考频率的权系数序列的频谱相同,而在频率轴上满足比例伸缩关系,比例尺度为参考频率与相应频率子带的中心频率之比。依据此设计思想,给出有效孔径不变的CZT法(CZTIA)和有效孔径变化的CZT法(CZTVA)两种CBB实现方法。它们均是由参考频率的权系数序列,通过设定不同的参数值,采用CZT快速计算各个子带的权系数序列的频谱,然后通过傅里叶反变换便可得到相应频率子带的权系数序列。计算机仿真结果验证了理论分析的正确性。     

On-line coupling of dynamic microwave-assisted extraction to solid-phase extraction for the determination of sulfonamide antibiotics in soil

A rapid technique based on dynamic microwave-assisted extraction (DMAE) coupled on-line with solid-phase extraction (SPE) was developed for the determination of sulfonamides (SAs) including sulfadiazine, sulfameter, sulfamonomethoxine and sulfaquinoxaline in soil. The SAs were first extracted with acetonitrile under the action of microwave energy, and then directly introduced into the SPE column which was packed with neutral alumina for preconcentration of analytes and clean-up of sample matrix. Subsequently, the SAs trapped on the alumina were eluted with 0.3% acetic acid aqueous solution and determined by liquid chromatography-tandem mass spectrometry. The DMAE parameters were optimized by the Box-Behnken design. Maximum extraction efficiency was achieved using 320 W of microwave power; 12 mL of extraction solvent and 0.8 mL min⁻¹ of extraction solvent flow rate. The limits of detection and quantification obtained are in the range of 1.4-4.8 ng g⁻¹ and 4.6-16.0 ng g⁻¹ for the SAs, respectively. The mean values of relative standard deviation of intra- and inter-day ranging from 2.7% to 5.3% and from 5.6% to 6.7% are obtained, respectively. The recoveries of SAs obtained by analyzing four spiked soil samples at three fortified levels (20 ng g⁻¹, 100 ng g⁻¹ and 500 ng g⁻¹) were from 82.6 ± 6.0% to 93.7 ± 5.5%. The effect of standing time of spiked soil sample on the SAs recoveries was examined. The recoveries of SAs decreased from (86.3-101.9)% to (37.6-47.5)% when the standing time changed from one day to four weeks.     

Determination of melamine in animal feed based on liquid chromatography tandem mass spectrometry analysis and dynamic microwave-assisted extraction coupled on-line with strong cation-exchange resin clean-up

In this work, a new method was developed for the determination of melamine (MEL) in animal feed. The method was based on the on-line coupling of dynamic microwave-assisted extraction (DMAE) to strong cation-exchange (SCX) resin clean-up. The MEL was first extracted by 90% acidified methanol aqueous solution (v/v, pH = 3) under the action of microwave energy, and then the extract was cooled and passed through the SCX resin. Thus, the protonated MEL was retained on the resin through ion exchange interaction and the sample matrixes were washed out. Some obvious benefits were achieved, such as acceleration of analytical process, together with reduction in manual handling, risk of contamination, loss of analyte, and sample consumption. Finally, the analyte was separated by a liquid chromatograph with a SCX analytical column, and then identified and quantitatived by a tandem mass spectrometry with positive ionization mode and multiple-reaction monitoring. The DMAE parameters were optimized by the Box–Behnken design. The linearity of quantification obtained by analyzing matrix-matched standards is in the range of 50–5,000 ng g⁻¹. The limit of detection and limit of quantification obtained are 12.3 and 41.0 ng g⁻¹, respectively. The mean intra- and inter-day precisions expressed as relative standard deviations with three fortified levels (50, 250, and 500 ng g⁻¹) are 5.1% and 7.3%, respectively, and the recoveries of MEL are in the range of 76.1–93.5%. The proposed method was successfully applied to determine MEL in different animal feeds obtained from the local market. MEL was detectable with the contents of 279, 136, and 742 ng g⁻¹ in three samples.      

Monitoring enzyme reaction and screening enzyme inhibitor based on MALDI-TOF-MS platform with a matrix of oxidized carbon nanotubes

A matrix assisted laser desorption/ionization time-of-flight mass spectrometry platform for quantitatively monitoring enzyme activity and screening enzyme inhibitors has been demonstrated. The described method employs a new matrix of oxidized carbon nanotubes. Compared with the traditional fluorescence approach, this label-free method has the advantage of directly identifying the substrates and products in enzymatic reactions. Moreover, the method could be conveniently carried out with any commercial mass spectrometer without modification. We quantitatively monitored the acetylcholinesterase activity and screened acetylcholinesterase inhibitors with a detection rate of about 3.3 s per sample.     

Determination of phenolic compounds in river water with on-line coupling bisphenol A imprinted monolithic precolumn with high performance liquid chromatography

The bisphenol A (BPA) imprinted monolithic precolumn has been prepared by in situ polymerization using 4-vinylpyridine (4-VP) and ethylene dimethacrylate (EDMA) as functional monomer and cross-linker, respectively. The column with good flow-through property was obtained by changing the molar ratio of the porogens (toluene and dodecanol). The selectivity and retention properties of the monolith for the BPA and other phenolic compounds were evaluated. The results show that the hydrophobic and hydrogen-bonding interaction plays important roles in the recognition process. The determination of BPA and other phenolic compounds with on-line solid-phase extraction (SPE) by monolithic precolumn coupled with conventional particulates packed and monolithic reversed-phase columns, respectively, was performed. The method was successfully applied to the analysis of phenolic compounds in river water.     

Influence of Aging Time on the Properties of Precursors of CuO／ZnO Catalysts for Methanol Synthesis

The aging process of pure copper precursors and copper-zinc binary precursors were studied by XRD, TG-DTG and TPR techniques. The catalytic activity and stability of CuO/ZnO were tested using fixed-bed flow reactor, and the physical properties of the catalysts and Cu species were characterized with N2 adsorption and N2O passivation method, respectively. For the Cu-Zn binary system prepared at the precipitating condition of pH=8.0 and temperature=80℃, the initial phase was a mixture of copper nitrate hydroxide Cu2(NO3)(OH)3, georgeite and hydrozincite Zn5(CO3)2(OH)6. By increasing the duration of its aging time, the phase of Cu2(NO3)(OH)2 first transited to georgeite, and then interdiffused into Zns(CO3)2(OH)6 and resulted in two new phases: rosasite (Cu,Zn)2CO3(OH)2 and aurichalcite (Zn,Cu)5(CO3)2(OH)6. The former phase was much easier to be formed than the latter one, while the latter phase was more responsible for the activity of methanol synthesis than the former one. It is found that the composition and structure of the precursors altered obviously after the colour transition point. The experimental results showed that methanol synthesis is a structure-sensitive catalytic reaction.     

Influence of Reaction Conditions on Methanol Synthesis and WGS Reaction in the Syngas-to-DME Process

A series of CuO-ZnO catalysts (with different Cu/Zn molar ratios) were prepared, and evaluated under the reaction conditions of syngas-to-dimethyl ether (DME) with three sorts of feed gas and different space velocity. The catalysts were characterized by X-ray diffraction (XRD) and temperature-programmed reduction (TPR). The experiment results showed that the reaction conditions of syngas-to-DME process greatly affected the methanol synthesis and WGS reaction. The influence caused by Cu/Zn molar ratio was quite different on the two reactions; increasing of percentage of CO2 in feed gas was unfavorable for catalyst activity, and also inhibited both reactions: enhancement of reaction space velocity heavily influenced the performance of the catalyst, and the benefits were relatively less for methanol synthesis than for the WGS reaction.