Output Intensity Variations of the Laser Used in a Prism Coupling System and Its Application

The output intensity variations of the laser used in a prism coupling system are observed and found to be induced by the external optical feedback, which comes from the reflection on the prism. The intensity variations are explained with laser theory. The trough in the intensity variation corresponds to the position of the prism when the output light beam propagates perpendicularly to the prism. Based on the trough a new method for rotating the prism and reading out the step numbers is proposed, by which the angle 0° in the system need not to be calibrated. It is proven by experiment that the new method would improve the accuracy of the refractive index up to ±0.00001 and thickness to ±1 nm.     

����ͨ���豸��ר�ó������X�ź����ݲɼ��������

采用了通用高速A/D采集器采集信号数据,用软件的方法开发出了具备多道能谱脉冲识别和计数分析能力的软件.用此软件实现了每次托卡马克放电后,在较短的时间内从庞大的原始采集数据中提取出能谱脉冲数据,计算和显示能谱图,这为下一步测量电子温度打下了基础,并同时实现了数据共享.     

基于金属卤化物钙钛矿材料的高效发光二极管

金属卤化物钙钛矿半导体既在光伏器件研究中获得巨大进展,又在发光应用中体现出明显优势。金属卤化物钙钛矿半导体的荧光转化效率高、发光峰形窄、发射光谱可调控并可覆盖整个可见光范围,从而使得该类材料所制备的发光二极管有望满足下一代显示技术应用的性能要求。文章在简要叙述发光二极管基本原理的基础上,分别介绍了钙钛矿材料的结构和荧光特性、钙钛矿发光二极管的电致发光特性,以及钙钛矿发光二极管进入实际应用所必须解决的器件寿命、离子迁移和光谱不稳定性等主要技术问题,最后讨论了钙钛矿发光技术所面临的机遇和挑战。     

带分数线性噪声的随机微分方程的比较定理

本文利用辅助随机微分方程,研究一类带分数噪声随机微分方程解的比较定理,并讨论解对参数的单调依赖性.     

阳离子聚丙烯酰胺的聚合方法研究进展

论文评述和探讨了目前阳离子聚丙烯酰胺的几种常见的聚合方法,包括水溶液聚合、反相乳液聚合、分散聚合及光引发聚合,对各聚合方法的优缺点进行了比较,并且对各种方法的产业化进行了分析,提出了光引发聚合法的发展前景,认为有必要深入开展光引发聚合机理及相关技术研究。     

Ca0.8-2x(YbxTb0.1Na0.1+x)2xWO4近红外下转换荧光粉水热合成及发光性质

一种在近红外光谱(NIR)区域高效的量子剪裁现象已在Ca0.8-2x(Ybx Tb0.1Na0.1+x)2x WO4(x=0～0.2)荧光粉中得到证实,该量子剪裁通过吸收紫外线光子发射近红外光子,能量传递包括两个协同过程,分别是WO42-基团到Yb3+离子和WO42-基团到Tb3+离子再到Yb3+离子,Yb3+离子的掺杂浓度对荧光粉在可见光和近红外光谱的发光,荧光寿命和量子效率的影响已进行了详细的研究。经计算,量子效率最大达到135.7%。铽与镱共掺钨酸钙的近红外量子剪裁,通过吸收太阳光谱的1个紫外光子到2个1 000 nm光子(2倍光子数增加)的下转化机制实现高效率硅太阳能电池的途径。     

Solvent extraction of U(VI) by trioctylphosphine oxide using a room-temperature ionic liquid

The unique physical and chemical properties of room-temperature ionic liquids(RTILs) have recently received increasing attention as solvent alternatives for possible application in the field of nuclear industry, particularly in liquid-liquid separations of radioactive nuclides. We investigated solvent extraction of U(VI) from aqueous solutions into a commonly used ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide([C4mim][NTf2]) using trioctylphosphine oxide(TOPO) as an extractant. The effects of contact time, TOPO concentration, acidity, and nitrate ions on the U(VI) extraction are discussed in detail. The extraction mechanism was proposed based on slope analysis and UV-Vis measurement. The results clearly show that TOPO/[C4mim][NTf2] provides a highly efficient extraction of U(VI) from aqueous solution under near-neutral conditions. When the TOPO concentration was 10 mmol/L, the extraction of 1 mmol/L U(VI) was almost complete( 97%). Both the extraction efficiency and distribution coefficient were much larger than in conventional organic solvents such as dichloromethane. Slope analysis confirmed that three TOPO molecules in [C4mim][NTf2] bound with one U(VI) ion and one nitrate ion was also involved in the complexation and formed the final extracted species of [UO2(NO3)(TOPO)3]+. Such a complex suggests that extraction occurs by a cation-exchange mode, which was subsequently evidenced by the fact that the concentration of C4mim+ in the aqueous phase increased linearly with the extraction percent of U(VI) recorded by UV-Vis measurement.     

NaF含量对以水滑石结构为前驱体的固体碱催化剂F-Ca-Mg-Al及碳酸二甲酯合成的影响（英文）

以碳酸丙烯(PC)和甲醇为原料,经酯交换反应合成的多功能、环保的碳酸二甲酯(DMC)是一种绿色、节能的合成方法。CaO固体碱催化剂对该反应具有良好的催化性能,但其再生性不理想。以F-Ca-Mg-Al水滑石(LDHs)为原料,制备了一系列不同Na F用量的固体碱催化剂,并对其进行了表征和酯交换反应测试。与不加氟的FCMA-0催化剂相比,经氟改性后的催化剂的比表面积、碱量、催化活性等性能均有明显提高。催化活性由高到低依次为:FCMA-0.8> FCMA-0.4>FCMA-1.2> FCMA-1.6> FCMA-0,这与总碱位量和强碱位量一致。FCMA-0.8催化剂活性最好,与纯CaO催化剂的相当,PC转化率为66.8%,DMC选择性为97.4%,DMC收率为65.1%。在10次循环使用后,FCMA-0.8催化剂的DMC收率仅下降3.9%(CaO催化剂下降33.2%)。FCMA-0.8在PC与甲醇酯交换制DMC方面具有良好的工业应用前景。     

锰氧化物中氧空位的构建及其催化氧化苯系物作用机制研究进展

作为一种过渡金属氧化物,锰氧化物以其多晶型、储/释氧能力强、蕴含丰富氧物种、结构缺陷可控等优点被广泛应用于苯系物的热催化氧化。其中,具有众多特性的氧空位能有效促进苯系物的完全催化氧化,因而成为各界研究的焦点。我们综述了常见的氧空位构建方法及表征技术,并总结了在苯系物催化氧化过程中,锰氧化物中氧空位的几种重要作用机制对催化活性和抗水性能的积极影响。最后文章对氧空位构建新方法、形成机理、具体过程及其在锰氧化物热催化氧化苯系物领域中的应用进行了总结和展望。     

新型复合共沉淀法制备高能量/高功率型锂离子二次电池用5V正极材料LiNi_(0.5)Mn_(1.5)O_4及其电化学性能

在传统的固相法的基础上开发了新型复合共沉淀法制备LiNi0.5Mn1.5O4材料.新型复合共沉淀法采用(NH4)2CO3和(NH4)2C2O4共同作为沉淀剂,通过控制共沉淀反应条件,得到了具有均匀球形形貌的沉淀物颗粒.再通过与饱和氢氧化锂溶液的水热反应及高温反应,最终制备出具有球形次级形貌和纯相尖晶石结构的LiNi0.5Mn1.5O4材料.电化学测试表明,制备的LiNi0.5Mn1.5O4具有优异的电化学性能,其初始容量达到了141.4mAh·g-1.在0.3C、1C和3C倍率下经过200次循环后的容量分别为136.0 mAh·g-1(96.3%)、128.6 mAh·g-1(94.4%)和113.9 mAh·g-1(91.1%).通过高温反应及特殊的冷却处理,LiNi0.5Mn1.5O4在4.0 V低压区平台的容量损失得到了有效抑制.更重要的是,通过控制合成过程中的关键步骤,可实现半定量化控制材料结构中的原子有序排布程度,进而得到具有高能量密度和高功率密度的两种LiNi0.5Mn1.5O4材料,其能量密度和功率密度分别达到了648.6 mWh·g-1和7000 mW·g-1以上.