Shape-controlled synthesis of nanocrystalline titania at low temperature

The interesting shape (shuttle-like, sphere with needles, uniform particles) rutile titania were prepared by the hydrolysis of TiCl₄ in high acidic aqueous solution in the absence or presence of PEG-1000. PEG-1000 acted as dispersant, which could control the shape and size of the precipitate of titania. As a result, shuttle-like nanocrystalline appeared and the aggregation was improved with the increase of the amount of acid and the decrease of the concentration of TiCl₄ in the absence of PEG-1000. Uniform nanoparticles were obtained in the presence of PEG-1000 and the diameter of the particles decreased with increasing the amount of PEG-1000. This process simplification will lower production cost and make continuous process possible. The products were analyzed using X-ray diffractometer, transmission electron microscopy.     

应力对La0.83Sr0.17MnO3薄膜输运性能的影响

采用溶胶-凝胶方法在Si(111)上制备了LSMO(x=0.17)薄膜.研究了块体材料和不同厚度薄膜R -T曲线、红外光谱和X射线衍射.结果表明，LSMO薄膜属于正交晶体结构，薄膜取向与膜厚度 有关，当膜厚度为450nm或680nm时，主要取向〈200〉，而膜厚度为900nm时取向为〈020〉 ：根据离子对相互作用能和谐振子模型，得到了红外吸收与Mn—O—Mn键长和键角关系式，6 00cm^-1附近红外吸收与晶格常数b的变化有关；块体与薄膜的金属—绝缘体转变 温度(T_MI)存在较大差别，薄膜转变温度显著低于块体，并与厚度有一定关系. 认为是LSMO薄膜中的应力诱导了晶格常数变化，引起键角改变及JT效应是转变温度变化的主 要原因. 关键词： 单晶硅 晶格常数 金属—绝缘体转变温度 应力诱导     

纳米晶Y_2SiO_5∶Eu的浓度猝灭研究

报道了分别用溶胶－凝胶法合成的Ｙ２ＳｉＯ５∶Ｅｕ纳米晶和用高温固相法合成常规尺度的Ｙ２ＳｉＯ５∶Ｅｕ材料的光致发光光谱和猝灭浓度的实验研究．结果表明：纳米Ｙ２－ｘＥｕｘＳｉＯ５比常规尺度的Ｙ２－ｘＥｕｘＳｉＯ５有更高的猝灭浓度和更高的发光亮度．理论分析认为这是由于在纳米材料中能量共振传递被阻断和猝灭中心在各个纳米晶内分布的涨落造成的．这个结果为高亮度的Ｙ２ＳｉＯ５∶Ｅｕ纳米材料的实际开发应用展示了广阔前景．     

Study of the Complexation Behavior of Calixarene with Transition Metal Cations by UV—vis and Fluorescent Spectra

A new fluorescent compound based on calix[4] arene skeleton was synthesized.Its complexation ability with transition metal ions,such as Fe^3 ,Co^2 ,Ni^2 ,Cu^2 ,Zn^2 and Ag^ ,Was investigated by UV-vis and fluorescent spectra.     

A concise and efficient synthesis of salvinal from isoeugenol via a phenoxenium ion intermediate

In this letter, we describe how salvinal can be efficiently synthesized from isoeugenol via a phenoxenium ion intermediate by four steps in 23% over all total yield.     

Probing the local structure and mechanical response of nanostructures using force modulation and nanofabrication

Nanostructures of self-assembled monolayers (SAMs) are designed and produced using coadsorption and nanografting techniques. Because the structures of these artificially engineered domains are predesigned and well-characterized, a systematic investigation is possible to study the mechanical responses to force modulation under atomic force microscope tips. Force modulation imaging reveals characteristic contrast sensitivity to changes in molecular-level packing, molecule chain lengths, domain boundaries, and surface chemical functionalities in SAMs. By means of actively tuning the driving frequency, the resonances at the tip-surface contact are selectively activated. Therefore, specific surface features, such as the edges of the domains and nanostructures or desired chemical functionalities, can be selectively enhanced in the amplitude images. These observations provide a new and active approach in materials characterization and the study of nanotribology using atomic force microscopy.     

吲哚乙酸与磷钼黄反应及其极谱分析的研究

在ＮＨ３－ＮＨ４Ｃｌ缓冲溶液中（ｐＨ＝９．５），吲哚乙酸与磷钼黄的还原产物在滴汞电极上于－１．１０Ｖ（ｖｓ．ＳＣＥ）处产生一灵敏的极谱波，该波波高与吲哚乙酸的浓度在１．０×１０－７－５．０×１０－６ｍｏｌ／Ｌ范围内成线性关系，检测下限为５．０×１０－８ｍｏｌ／Ｌ。如在上述还原产物中加入偶氮胭脂红Ｂ、孔雀绿、甲基紫等染料及聚乙烯醇，可使极谱波的灵敏度提高，使吲哚乙酸的浓度在５．０×１０－８－１．０×１０－６ｍｏｌ／Ｌ范围内与波高成线性关系，检测下限降低至１．０×１０－８ｍｏｌ／Ｌ。