A Microwave‐assisted Headspace Solid‐phase Microextraction for Rapid Determination of Synthetic Polycyclic and Nitro‐aromatic Musks in Fish Samples

Rapid solvent‐free microwave‐assisted headspace solid‐phase microextraction (MA‐HS‐SPME) coupled with gas chromatography‐mass spectrometry (GC‐MS) was developed to determine synthetic polycyclic and nitro‐aromatic musks in fish samples. Four commonly used synthetic musks, galaxolide (HHCB), tonalide (AHTN), musk xylene (MX) and musk ketone (MK) were employed in the method development and validation. The parameters (microwave irradiation time, irradiation power, amount of water addition, pH value and addition of NaCl) affecting the extraction efficiency of analytes from fish slurry were systematically investigated and optimized. The best extraction conditions were achieved when the fish sample 2‐g mixed with 4‐mL methanol and 15‐mL deionized water (containing 4 g of NaCl, pH 2.0 in a 40‐mL sample‐vial) was microwave irradiated at 80 watt for 5 min. The limits of quantification (LOQ) were 0.4 to 1.2 ng/g in 2‐g of wet tissue. The precision for these analytes, as indicated by relative standard deviations, were less than 9% for both intra‐ and inter‐day analysis. Accuracy, expressed as the mean extraction recovery, was between 80 to 92%. A standard addition method was used to quantitate these four synthetic musks, and the total concentrations ranged from 2.1 to 23.1 ng/g in various fish samples.     

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

Convenient Synthesis of 2,7-Diamino-9,9- bis(4-aminophenyl)fluorene

For the synthesis of 2,7-diamino-9,9-bis(4-aminophenyl)fluorene 2 , first 2,7-dinitro-9,9-bis(4-aminophenyl)fluorene 1 was synthesized by the reaction of 2,7-dinitro-9-fluorenone with aniline and aniline hydrochloride. 2 was obtained by the reduction of 1 with hydrazine hydrate and 10% palladium on carbon.     

A microchip-based proteolytic digestion system driven by electroosmotic pumping

Microchip-based proteomic analysis requires proteolytic digestion of proteins in microdevices. Enzyme reactors in microdevices, fabricated in glass, silicon, and PDMS substrates, have recently been demonstrated for model protein digestions. The common approach used for these enzyme reactors is employment of a syringe pump(s) to generate hydrodynamic flow, driving the proteins through the reactors. Here we present a novel approach, using electroosmotic flow (EOF) to electrokinetically pump proteins through a proteolytic system. The existence of EOF in the proteolytic system packed with immobilized trypsin gel beads was proven by imaging the movement of a neutral fluorescent marker. Digestions of proteins were subsequently carried out for 12 min, and the tryptic peptides were analyzed independently using capillary electrophoresis (CE) and MALDI-TOF mass spectrometry (MS). The results from CE analysis of the tryptic peptides from the EOF-driven proteolytic system and a conventional water bath digestion were comparable. MALDI-TOF MS was used to identify the parent protein and the tryptic peptides using MS-Fit database searching. The potential utility of the EOF-driven proteolytic system was demonstrated by direct electro-elution of proteins from an acrylamide gel into the proteolytic system, with elution and tryptic digestion achieved in a single step. The EOF-driven proteolytic system, thus, provides a simple way to integrate protein digestion into an electrophoretic micro total analysis system for protein analysis and characterization.     

Pseudolarolides O and P,Two Novel Triterpene Dilactones from Pseudolarix kaempferi

Pseudolarolides O ( 1 ) and P ( 2 ), two novel triterpenoids with a cycloartane‐type framework, were isolated from the seeds of Pseudolarix kaempferi Gord. (Pinaceae). Their structures were elucidated as (16R,23S,25R)‐16,23‐epoxy‐3,4 : 9,10‐disecocycloartan‐1(10),9(11)‐diene‐3(4),26(23)‐diolide ( 1 ), and (9S,16R,23S,25R)‐1,9 : 16,23‐diepoxy‐8,9 : 9,10‐disecocycloartan‐1(29),5(6),10(19)‐triene‐3(4),26(23)‐diolide ( 2 ), respectively, on the basis of spectroscopic techniques and X‐ray‐diffraction studies.     

The Synthesis of Some New N‐[1‐(2,5‐Dichlorophenyl)‐5‐Methyl‐1,2,3‐Triazol‐4‐yl]‐Carbamic Acid Ester Derivatives

The synthesis of some new N‐[1‐(2,5‐dichlorophenyl)‐5‐methyl‐1,2,3‐triazol‐4‐yl]‐carbamic acid ester derivatives are reported in this paper. The yielded products 6a‐l were confirmed by Elemental analyses, NMR, MS, and IR spectra.     

丁二烯阴离子聚合动力学及活性种的研究

本文对于n-BuLi/2G引发的丁二烯阴离子聚合动力学数据及产物微观结构进行了解析。建立了动力学模型,提出了聚合反应机理。求得了单量体、一络合体和二络合体的增长速度常数和诸活性种之间的平衡常数以及它们对形成乙烯基结构的贡献。     

High Power- and Energy-Density Supercapacitors through the Chlorine Respiration Mechanism

Supercapacitor represents an important electrical energy storage technology with high-power performance and superior cyclability. However, currently commercialized supercapacitors still suffer limited energy densities. Here we report an unprecedentedly respiring supercapacitor with chlorine gas iteratively re-inspires in porous carbon materials, that improves the energy density by orders of magnitude. Both electrochemical results and theoretical calculations show that porous carbon with pore size around 3 nm delivers the best chlorine evolution and adsorption performance. The respiring supercapacitor with multi-wall carbon nanotube as the cathode and NaTi₂(PO₄)₃ as the anode can store specific energy of 33 Wh kg⁻¹ with negligible capacity loss over 30 000 cycles. The energy density can be further improved to 53 Wh kg⁻¹ by replacing NaTi₂(PO₄)₃ with zinc anode. Furthermore, thanks to the extraordinary reaction kinetics of chlorine gas, this respiring supercapacitor performs an extremely high-power density of 50 000 W kg⁻¹.     

电热蒸发-电感耦合等离子体质谱(ETV-ICP-MS)技术中气溶胶传输效率研究进展

蒸发效率和传输效率是影响电热蒸发-电感耦合等离子体质谱(ETV-ICP-MS)技术分析性能的关键因素。综述有关气溶胶传输效率的研究进展,在归纳常用的传输系统评价方法的基础上,重点对影响气溶胶传输效率的电热蒸发装置的改进、蒸发过程的探讨、基体改进剂的选择等研究现状进行评述。有关ETV蒸发过程中基体干扰的作用机制仍有待进一步系统研究,这对于校正策略的优化、新型校正技术的创新与集成具有重要的理论指导意义,可推动ETV-ICP-MS在地质、环境、生物等学科的更广泛应用。     

Citronellol-Based Long-Lasting Antibacterial Cotton Fabrics without Bacterial Resistance

Antibacterial cotton helps prevent the growth and spread of harmful microorganisms, reduces the risk of infection, and has a prolonged service life by reducing bacterial degradation. However, most antibacterial agents used are toxic to humans and the environment. Citronellol-poly(N,N-dimethyl ethyl methacrylate) (CD), a highly effective antibacterial polymer, is synthesized from natural herbal essential oils (EOs). CD exhibited efficient, rapid bactericidal activity against Gram-positive, Gram-negative, and drug-resistant bacteria. Citronellol's environmental benignity makes CDs less hemolytic. Notably, negligible drug resistance developed after 15 bacterial subcultures. The CD-treated cotton fabric displayed better antibacterial performance than AAA-grade antibacterial fabric, even after repeated washing. This study extends the practical application of EOs to antibacterial surfaces and fabrics, which is promising for use in personal care products and medical settings.