常见场致发射阴极材料的发射特性

利用三阴极加速器平台,对不锈钢、黄铜、铝、天鹅绒和石墨等几种常见场致发射材料的电流发射能力、相对启动延迟时间及其抖动进行了实验研究。实验结果表明：在二极管电压近似恒定时,不锈钢阴极启动时间延迟抖动小于8 ns,天鹅绒阴极及石墨阴极启动时间延迟抖动小于4 ns;且材料在阴极频繁工作时启动时间加快;常见金属材料中不锈钢阴极的综合性能较好;非金属材料中,天鹅绒阴极的发射能力最强,且发射延迟时间最短,但考虑到天鹅绒材料严重的出气问题,非金属材料中以石墨阴极的性能为优。     

A catadioptric infrared dual band optically passive athermal optical system

The paper proposes a catadioptric infrared dual band optical system based on catadioptric configuration and optically passive athermal design method. The system shares primary mirror, secondary mirror and collimating lens group, and achieves abruption in longwave infrared and midwave infrared using a dichroic beam splitter. The influence of temperature on optical parameters, the design theory and design method are analyzed. A design example is presented. The detailed optimization design method and some considering factors in engineering design moment are discussed. The design results illustrate that the system can obtain good image quality in environment temperature of 10–40?°C, which could satisfy the design requirement. The actual test result not only satisfies the design requirement, but also validates the availability of the method in the paper.     

Strength and equation of state of molybdenum triboride under 80 GPa pressure,using radial X-ray diffraction

The strength and equation of state of molybdenum triboride have been determined under nonhydrostatic compression up to 80?GPa, using an angle-dispersive radial X-ray diffraction technique in a diamond anvil cell (DAC). The RXD data yield a bulk modulus and its pressure derivative as K_0?=?342(6)?GPa with K₀′?=?2.11(17) at ψ?=?54.7°. Analysis of diffraction data using the strain theory indicates that the ratio of differential stress to shear modulus (t/G) ranges from 0.002 to 0.050 at pressures of 4–80?GPa. Together with theoretical results on the high pressure shear modulus, our results here show that molybdenum triboride sample under uniaxial compression can support a differential stress of ～10?GPa when it started to yield with plastic deformation at ～30?GPa. In addition, we draw a conclusion that MoB₃ is not a superhard material but a hard material.     

用光波导光模光谱技术研究DNA-DNA结合蛋白相互作用

探讨了应用光波导光模光谱(Optical waveguide lightmode spectroscopy,OWLS)技术研究DNA-DNA结合蛋白相互作用的可行性和灵敏性。以固定在传感器芯片表面的DNA探针为捕捉分子,溶液中同时含有探针结合序列和NF—κB结合位点序列的寡核苷酸与NF-κB亚单位p50同源二聚体形成的DNA-蛋白质复合物为检测分子,用光波导光模光谱检测技术建立非标记DNA-DNA结合蛋白相互作用检测研究体系。利用这一体系对不同样品中NF-κB p50浓度和具不同NF-κB结合位点序列的寡核苷酸与NF-κB p50亲合和力进行检测。样品中低至0．33 nmol/1的NF-κB p50被光波导光模光谱检测出,不同的NF-κB结合序列与NF-κB p50亲合力有显著的差异。研究发现,光波导光模光谱技术可以用于DNA-DNA结合蛋白相互作用研究,所建立的非标记检测研究体系可以进行样品中结合蛋白含量高灵敏检测和核酸序列与结合蛋白的亲合力的检测研究。     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

聚氨酯结构与径向分布的分子动力学模拟

采用分子动力学方法计算得到DHI-乙烯醇聚合体系统的结构和径向分布函数.讨论了系统结构和径向分布函数与温度和压力之间的关系.结果表明粘合系统的空间分布一般地随着温度和压力的增加而收窄,对增加聚氨酯系统的粘合性具有积极的意义.     

THE EXACT SOLUTIONS OF THE BURGERS EQUATION AND HIGHER-ORDER BURGERS EQUATION IN (2+1) DIMENSIONS

Some exact solutions of the Burgers equation and higher-order Burgers equation in (2+1) dimensions are obtained by using the extended homogeneous balance method. In these solutions there are solitary wave solutions, close formal solutions for the initial value problems of the Burgers equation and higher-order Burgers equation, and also infinitely many rational function solutions. All of the solutions contain some arbitrary functions that may be related to the symmetry properties of the Burgers equation and the higher-order Burgers equation in (2+1) dimensions.     

光学微盘腔与三能级量子点系统中的模耦合研究

用一种全量子理论方法研究了波导、光学微盘腔与三能级量子点耦合系统的动力学过程,求出其耦合后的透射模和反射模的解析解. 由于微腔表面粗糙引起反向散射,在微腔内形成两简并回音壁耦合共振模,其耦合率为β;量子点的两激发态分别以耦合率g₁,g₂与回音壁耦合共振模产生耦合. 在实数空间里,得出透射光谱和反射光谱的数值解,这些三能级模型结果比二能级模型结果更接近真实光学微盘腔系统,能更好地显示耦合系统的动力学特性. 关键词： 模耦合 光学微盘腔 三能级量子点 全量子理论     

小型化电谐振人工特异材料研究

详细分析了电谐振人工特异材料设计原理,并结合等效电路模型通过加载等效电感、等效电容和接地等方法,将相同尺寸的工字形结构工作频率从12.21 GHz降到了5.46 GHz,小型化效果明显.该成果不仅对于不同结构人工特异材料小型化设计提供了重要的参考,同时也为设计不同性能、不同工作频率的人工特异材料提供了明确的研究方向和有效的途径.