Identification of lactobacillus casei-BDI and Streptococcus thermophilus by fluorescence spectra

Fluorescence analysis applied in the study of lactic acid bacteria （LAB） provides a new method and theory to study probiotics and realize the detection and identification of the strains. It is also possible to achieve automation and computerization. In this letter, the differences between the fluorescence spectra of lactobacilIus casei-BDI （Lc-BDI） and Streptococcus thermophilus （St） are shown, and the second-order derivative spectra are used to further study the diversity of these two strains. According to the results, with the excitation wavelengths of 285 and 340 nm, there are significant differences between them. The experiment is repeated for 6 times, showing good repetitiveness.     

BiH(D,T)分子基态结构与势能函数

采用量子力学从头计算方法,运用单双取代二次组态相互作用和单双（三）取代二次组态相互作用并结合LanL2DZ基组,计算优化了BiH（D,T）分子基态X³Σ的结构和离解能.并采用最小二乘法拟合改进的Murrell-Sorbie 函数得到了相应的势能函数.计算得到的光谱常数与实验光谱数据符合很好. 关键词： BiH（D T）分子基态 势能函数 Murrell-Sorbie函数     

InAs/GaSb量子阱的能带结构及光吸收

采用八能带K-P理论以及有限差分方法,研究了沿[001]方向生长的InAs/GaSb二类断带量子阱体系的能带结构、波函数分布和对[110]方向线性偏振光的吸收特性.研究发现,通过改变InAs或GaSb层的厚度,可有效调节该量子阱体系的能带结构及波函数分布.计算结果表明,当InAs/GaSb量子阱的导带底与价带顶处于共振状态时,导带基态与轻空穴基态杂化效应很小,且导带基态与第一激发态的波函数存在较大的重叠,导带基态与第一激发态之间在布里渊区中心处的跃迁概率明显大于导带底与价带顶处于非共振状态时的跃迁概率.研究结果对基于InAs/GaSb二类断带量子阱体系的中远红外波段的新型级联激光器、探测器等光电器件的设计具有重要意义.     

基于局部方向编码的遥感影像平行边缘识别

针对高分辨率遥感图像中道路、建筑物和水域等的特征识别难题,提出了一种基于边缘局部方向信息的平行边缘自动识别算法。该算法首先定义平行边缘由一系列相互平行的短直线组成;然后提出了交叉点共线约束的8-邻域边界追踪和9-像素滑动窗口内直线检测算法,实现了边缘连续线条局部方向信息编码;最后通过分析连续线条结构及方向编码规律,提出了主元分析及方向一致性判别准则进行平行特征识别。实验结果表明,该算法能够有效提取高分辨率遥感图像中具有最近邻关系的平行直线和曲线特征,平均识别准确率在95%以上,但算法执行速度有待提高。     

The Branch Processes of Chern-Simons (CS) <Emphasis Type="Italic">p</Emphasis>-Branes

In this paper, by making use of Duan’s topological current theory, the branch process of Chern-Simons (CS) p-branes is discussed in detail. Chern-Simons (CS) p-branes are found generating or annihilating at the limit points and encountering, splitting, or merging at the bifurcation points and higher degenerated points systematically of the vector order parameter field . Furthermore, it is also shown that CS p-branes are found splitting or merging at the degenerate point of field function but the total topological charges of the CS p-branes are still unchanged.     

A facile method to synthesize nitrogen and fluorine co-doped TiO2 nanoparticles by pyrolysis of (NH4)2TiF6

The nitrogen and fluorine co-doped TiO₂ (N-F-TiO₂) nanoparticles of anatase crystalline structure were prepared by a facile method of (NH₄)₂TiF₆ pyrolysis, and characterized by thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and ultraviolet visible (UV-Vis) spectroscopy etc. With the increase of calcination temperature, (NH₄)₂TiF₆ decomposed into TiOF₂ and NH₄TiOF₃ at first, and then formed anatase-type TiO₂ with thin sheet morphology. H₃BO₃ as oxygen source can promote the formation of anatase TiO₂, but decrease the F content in the N-F-TiO₂ materials due to the formation of volatile BF₃ during the precursor decomposition. The photocatalytic activity of the obtained N-F-TiO₂ samples was evaluated by the methylene blue degradation under visible light, and all the samples exhibited much higher photocatalytic activity than P25. Moreover, the merits and disadvantages of this proposed method to prepare doped TiO₂ are discussed.     

基于空穴注入层摩擦定向的偏振蓝光聚合物电致发光器件

研究了利用摩擦空穴注入层3,4-乙撑二氧噻吩:聚苯乙烯磺酸(PEDOT:PSS)作为定向层实现聚芴(PFO)薄膜的偏振电致发光,蓝光的色坐标为(0.20,0.21).从聚合物薄膜的紫外可见吸收和光致发光偏振特性,研究了不同定向层摩擦强度、退火温度以及退火时间下PFO薄膜的二向色性,并证明退火温度是决定器件偏振性能的关键因素.当摩擦强度为25 mm退火温度和时间分别为200℃和30 min时,得到较好的偏振性能,器件的电致发光偏振率约为3. 关键词： 偏振发光 摩擦定向 聚合物电致发光 空穴注入层     

Dynamic behaviour of the icosahedral Al——Pd——Mn quasicrystal with a Griffith crack

The dynamic response of an icosahedral Al--Pd--Mn quasicrystal with a Griffith crack to impact loading is investigated in this paper. The elastohydrodynamic model for the wave propagation and diffusion together with their interaction is adopted. Numerical results of stress, displacement and dynamic stress intensity factors are obtained by using the finite difference method. The effects of wave propagation, diffusion and phonon--phason coupling on the quasicrystal in the dynamic process are discussed in detail, where the phason dynamics is explored particularly.     

一种实现光子晶体波导定向耦合型多路光均分的新方法

将多光子晶体单模波导平行、邻近放置构成定向耦合器. 依据自映像原理,数值分析了输入光场对称入射时,该系统中光的传播行为. 基于此结构,以三、四通道为例,设计了超微多路光分束器,并仅通过对称地改变耦合区中两个介质柱的有效折射率,使光场在横向发生重新分布,实现了输出能量的均分或自由分配. 和已报道结果相比,此调制方法更为简单易行而且效率更高,并可以推广到具有更多输出通道的光分束器中,在未来的集成光回路中具有广泛的应用价值. 关键词： 光子晶体波导 定向耦合器 分束器 能量均分     

紫外单光子成像系统增益特性研究

介绍了基于微通道板和楔条形阳极的紫外单光子成像系统的组成和工作原理.利用该系统分别研究了两块和三块微通道板在不同电压下的暗计数特性.实验和拟合结果表明微通道板的暗计数脉冲幅度呈负指数型分布,暗计数率随电压升高而增大.通过测试不同电压下的脉冲幅度分布曲线,发现微通道板增益在较高电压下更加均匀.研究了两块微通道板情况下,微通道板电压和间距对系统分辨率的影响.结果表明,系统分辨率随微通道板电压增加而提高;另外,适当增加微通道板间距也可以提高系统分辨率. 关键词： 单光子计数成像 微通道板 楔条形阳极 分辨率