正常金属/超导/正常金属双垒隧道结中的量子相干输运

考虑到量子相干效应和界面散射效应 ,利用 L ambert理论模型 ,计算正常金属 /绝缘层 /超导 /绝缘层 /正常金属双垒隧道结中的准粒子输运系数和隧道谱。研究表明 :( 1)所有的准粒子输运系数和电导谱在超导能隙之上都随能量作周期性振荡 ,其振荡周期依赖于超导层的厚度 ;( 2 )在超导能隙之上 Andreev反射系数随能量呈现周期性消失现象 ;( 3)在绝缘层势垒强度取很大的隧道极限下 ,超导层中会形成一系列的准粒子束缚态 ,其位置由量子化条件决定 ;( 4)界面散射效应不仅能压低各子能隙电导峰 ,还能使子能隙电导峰劈裂为两个峰。     

ICP-AES同时测定混合矿物素中的磷、钙、铁、铜、锌、锰、镁、钴

采用ICP－AES法测定混合矿物素中的磷、钙、铁、铜、锌、锰、镁、钴元素含量，并对样品的溶解酸和酸用量、元素分析线的选择以及共存元素间的干扰进行了研究。该法简便、快速，精密度和准确度较好。     

酸糖蛋白手性柱分离6种手性化合物

通过考察缓冲液种类、浓度及其pH值对对映体在手性柱上的保留和分离行为的影响,以及流动相中加入不同种类、不同浓度的不带电荷的有机溶剂乙腈、甲醇、正丙醇、异丙醇、流动相流速和柱温对对映体分离能力的影响,优化了含碳手性中心的碱性药物苯丙哌林、酸性化合物MT-A5及MT-酸和含硫手性中心的质子泵抑制剂奥美拉唑、泮托拉唑、雷贝拉唑对映体分离条件,最佳手性分离条件为:苯丙哌林,0.05 mol/L磷酸二氢铵缓冲液(pH 3.0)-乙腈(95∶5,V/V)为流动相,流速为0.7 mL/m in,柱温为20℃;MT-A5及MT-酸,流动相为0.01 mol/L醋酸铵缓冲液(pH 5.0)-乙腈(74∶26,V/V),流速为0.9 mL/m in,柱温为20℃;泮托拉唑,流动相为10 mmol/L醋酸铵缓冲液(pH 5.5)-乙腈(93∶7,V/V),流速为0.9 mL/m in;柱温为20℃;奥美拉唑和雷贝拉唑,流动相为0.01 mol/L醋酸铵缓冲液(pH 3.0)-乙腈(95∶5,V/V),流速为0.7 mL/m in,柱温为20℃。实现了应用高效液相色谱法在α1-酸糖蛋白手性柱上对上述化合物的对映体分离,并成功用于手性药物合成中的对映体过量百分率的测定。     

多目标规划的鞍点准则

本文给出多目标规划有效解适应鞍点准则的一个新的判别法 ,它不使用凸性的几何术语及凸分析中的概念。最后给出单目标规划的一个相应的判别法     

Study of the pulsed laser vapor doping of Si(1 0 0) with KrF excimer laser and BCl3 gas

The properties of pulsed laser vapor doping on p-Si(1 0 0) with a KrF (248 nm) excimer pulsed laser (248 nm) and BCl₃ gas are reported in this paper. The doped samples are characterized by the resistance measured using a four-probe method, since the sheet resistance changes with the carrier concentration of the sample. The doping effects with the variation of laser energy density, pulse number, and the pressure of BCl₃ were investigated in terms of the sheet resistance. In this way, the optimized parameters were obtained and used for the positive heavy doping on p-Si(1 0 0) and p-Si(1 1 1). Then, using a square mesh under the above conditions, an image doping was completed. Finally, the metal–semiconductor Ohmic contacts were realized by plating Ag and Cu films on the doped surface.     

On numerical ranges and roots

Existence of the fractional powers is established in Banach algebra setting, in terms of the numerical ranges of elements involved. The behavior of the spectra and (for Hermitian ∗-algebras satisfying some additional hypotheses) the ∗-numerical range under taking these powers also is investigated.     

Peritectic phase growth in directionally solidified Cu-70% Sn alloy

The growth mechanism of the peritectic η phase involving the peritectic reaction and peritectic transformation in Cu-70%Sn alloy was investigated under directional solidification. The results show that a major growth mechanism in thickening of the peritectic η-layer is not the peritectic reaction but the peritectic transformation. The transformation temperature and isothermal time play crucial roles in determining the volume fraction and the thickness of the peritectic η phase. With the increase of the temperature and isothermal time, the volume fraction of the peritectic η phase increases. The regressed data show that the relationship between the thickness of η phase (Δx) and the transformation temperature (T) meets the following equation In Δx=6.5−1673 1 / T. Additionally, there exists a relationship between the thickness of the η phase (Δx) and the isothermal time (t) at the 9 mm solidification distance below the peritectic reaction interface, Δx=0.72t ^1/2, which is consistent with the theoretical model. Supported by the National Science Foundation of China (Grant No. 50395102)     

光照下meso-四(4-磺基苯基)卟啉(H_2TPPS)形成锌配合物的光-极谱研究

在氨性溶液中,光照射对ZnTPPS的形成影响很大。光-极谱试验表明:光电流(i_p)与浓度(c)间有以下的关系:对Zn(NH_3)_4~(2+),i_p∝C_((Zn)(NH_3)_4)~(2+)_~(1/2),对H_2TPPS,i_p∝C_(H_2TPPS),ZnTPPS络合物还原波的i_p不明显。本文对其差异性和光电流产生的原因做了初步探讨。     

Characteristics and structures of weak efficient surfaces of production possibility sets

This paper studies the characteristics and structure of the weak surface of the production possibility set. We apply techniques and methods of transferring a polyhedral cone from its intersection form to its sum form, identify an intersection representation of the production possibility set. We give the structure theorem of weak surface of the production possibility set, which includes three complementary slackness conditions. We define the input weak efficiency and output weak efficiency for different DEA models according to the representation of the intersection form. It investigates the characteristics of the weak surfaces, and proves the structure theorems of input weak DEA efficiency and output weak DEA efficiency. The structure theorems establish weighted combination of inputs and outputs that are weak DEA efficient. Numerical examples are provided for illustration.     

牛顿第二定律实验中的误差分析

本文是通过对加速度的实验值和理论值进行比较和分析，给出误差的合理范围。