利用富铈混合稀土改善工业纯铝中富铁相形貌的研究

利用金相分析方法研究了富Ce混合稀土变质对含不同Fe量的工业纯铝的组织和其中富铁相形貌的影响。试验结果表明,随着Fe含量的增加,富铁相由弥散细小的颗粒状向短棒状、长针状转变;富Ce混合稀土变质使铝中的富铁相由长针状变为弥散细小的颗粒状。随着稀土含量的增加,-αAl晶粒逐渐细化,富铁相尺寸及数量逐渐减小。添加0.5%稀土时,-αAl晶粒细化效果最佳,而且富铁相呈细小颗粒状均匀分布在-αAl基体的晶界处。本文还对稀土改善富铁相的机制进行了分析。     

Notes on symmetric g-functions

A number of generalized metric spaces have been defined or characterized in terms of g-functions. Symmetric g-functions are discussed by C. Good, D. Jennings and A. M. Mohamad. In this paper, some questions about symmetric g-functions are answered, particularly it is shown that every sym-wg-space is expandable. The project is supported by the NNSF (10571151) and NSF (2006J0397) of Fujian Province of China.     

Minimax Theorems Involving Two Functions and Strictly Monotone Transformations of Their Values

Two two-function minimax theorems are proved.The concavity-convexity conditions of the twofunctions involve strictly monotone transformations and mixing of the values of the two functions,and aredescribed by the inequalities as upward and weakly downward conditions.     

Phosphonate electrochemical recognition by molecularly imprinted deposited film

In this paper, thin films of titanium oxide imprinted with O,O-dimethyl-(2,4-dichlorophenoxyacetoxyl)(3′-nitrobenyl) methinephosphonate (Phi-NO₂) were prepared via liquid phase deposition (LPD) method on a glassy carbon electrode. The imprinted molecular in the films was removed by treatment with immersion in CH₂Cl₂. X-ray diffraction (XRD) and electrochemical methods were introduced to show the evidence of the molecular imprinting phenomenon. It was also found that the recognition ability of the sensor depended on the substituents associated with tridimensional structures of the nitro-compounds. Under the optimized condition, the sensor showed better sensitivity, selectivity and reproducibility to the imprinted molecule and the linear relationship between the current and the concentration of analyte in the range of 0.1-50 μM was obtained. LPD proved to be a powerful method for imprinting titanium oxide thin sense films.     

ZnSe/SiO2复合薄膜光学常数与荧光光谱的研究

采用溶胶-凝胶工艺与原位生长技术，制备了ZnSe/SiO₂复合薄膜.X射线衍射分 析表明薄膜中ZnSe晶体呈立方闪锌矿结构.X射线荧光分析结果显示薄膜中Zn与Se摩尔比为1 ∶1.01—1∶1.19.利用场发射扫描电子显微镜观察了复合薄膜的表面形貌，结果表明复合薄 膜表面既存在尺寸约为400nm的ZnSe晶粒，也存在尺寸小于100nm的ZnSe晶粒.利用椭偏仪测 量了薄膜椭偏角Ψ，Δ与波长λ的关系，采用Maxwell-Garnett有效介质理论对薄膜的光学 常数、厚度、气孔率、ZnS 关键词： 2复合薄膜')" href="#">ZnSe/SiO₂复合薄膜 光学性质 椭偏光度法 荧光光谱     

组合Bose场的分数自旋和分数统计性

对组合Bose子场，采用FS (Faddeev-Senjanovic) 路径积分量子化方法进行量子化.从量子Noether定理出发，给出量子分数自旋和分数统计性质. 关键词： 路径积分量子化 分数自旋 分数统计     

On Basic Constraint Qualifications for Infinite System of Convex Inequalities in Banach Spaces

The BCQ and the Abadie CQ for infinite systems of convex inequalities in Banach spaces are characterized in terms of the upper semi-continuity of the convex cones generated by the subdifferentials of active convex functions. Some relationships with other constraint qualifications such as the CPLV and the Slate condition are also studied. Applications in best approximation theory are provided.     

单晶和多晶纯铝蠕变过程中的内耗

研究了单晶和多晶纯铝蠕变过程中的低频内耗. 在单晶纯铝中观察到: 内耗在蠕变初期单调下降, 在蠕变第一阶段后期出现了一个显著的时间内耗峰, 在蠕变第二阶段内耗趋于稳定值. 多晶纯铝在类似实验条件下则不出现时间内耗峰. 文中分析了出现时间内耗峰的条件和原因, 认为它是由于蠕变第一阶段中运动位错的阻尼系数逐渐增大所引起的. 文中还从蠕变过程中位错运动的微观机制出发, 推导出了蠕变过程中内耗的表达式, 满意地解释了实验结果. 关键词：     

On the persistence of elliptic lower-dimensional tori in Hamiltonian systems under the first Melnikov condition and Rüssmann’s non-degeneracy condition

In this paper we formulate a theorem on the persistence of elliptic lower-dimensional invariant tori for nearly integrable analytic Hamiltonian systems under the first Melnikov condition and Rüssmann’s non-degeneracy condition, and give the measure estimates of parameters for the non-resonance conditions under Rüssmann’s non-degeneracy condition, which is essential for the proof of our result.     

Numerical solution of differential equations using Sinc method based on the interpolation of the highest derivatives

In general, we will use the numerical differentiation when dealing with the differential equations. Thus the differential equations can be transformed into algebraic equations and then we can get the numerical solutions. But as we all have known, the numerical differentiation process is very sensitive to even a small level of errors. In contrast it is expected that on average the numerical integration process is much less sensitive to errors. In this paper, based on the Sinc method we provide a new method using Sinc method incorporated with the double exponential transformation based on the interpolation of the highest derivatives (SIHD) for the differential equations. The error in the approximation of the solution is shown to converge at an exponential rate. The numerical results show that compared with the exiting results, our method is of high accuracy, of good convergence with little computational efforts. It is easy to treat nonhomogeneous mixed boundary condition for our method, which is unlike the traditional Sinc method.