Diterpene derivative and chromone from Hypericum perforatum

A novel diterpene derivative, 5-methyl-5-(4,8,12-trimethyl-tridecyl)-dihydro-furan-2-one (1) and a new chromone, 5-hydroxy-7-methoxy-3-methyl-chromen-4-one (2), along with a known compound, phytol (3) have been isolated from the aerial parts of Hypericum perforatum. Their structures were established on the basis of spectroscopic analysis and by comparison with published values.     

Specific heat and Lindemann-like parameter of metallic clusters: mono- and polyvalent metals

The Brownian-type molecular dynamics simulation is revisited and applied to study the thermal and geometric properties of four mono- and two polyvalent metallic clusters. For the thermal property, we report the specific heat at constant volume CV and study the solid-liquid-like transition by scrutinizing its characteristic. For the geometric property, we calculate the root mean square relative bond-length fluctuation delta as a function of increasing temperature. The thermal change in delta reflects the movement of atoms and hence is a relevant parameter in understanding the phase transition in clusters. The simulated results for the CV of alkali and aluminum clusters whose ground state structures exhibit icosahedral symmetry generally show one phase transition. In contrast, the tetravalent lead is quite often seen to exhibit two phase transitions, a premelting process followed by a progressive melting. In connection with the premelting scenario, it is found here that those (magic number) clusters identified to be of lesser stability (among other stable ones) according to the second energy difference are clusters showing a greater possibility of undergoing premelting process. This energy criterion applies to aluminum clusters nAl=28 and 38. To delve further into the thermal behavior of clusters, we have analyzed also the thermal variation of deltaT and attempted to correlate it with CV(T). It turns out that the premelting (if exist) and melting temperatures of the smaller size clusters (n less, similar 50) extracted from CV do not always agree quantitatively with that deduced from delta.     

Surface composition and property of film prepared with aqueous dispersion of polyurethaneurea-acrylate including fluorinated block copolymer

The aqueous dispersion of polyurethaneurea-acrylate (PUA) including small amount of fluorinated block copolymers containing carboxyl groups (PATF), which can be dissolved in water, was used to make films and the surface properties of these films were examined. The experimental data show that the modified PUA film exhibits a hydrophobic surface property, although the original surface of PUA film is hydrophilic. The surface composition of the modified PUA film was measured by ATR and XPS. The results indicate that there is a concentration gradient of the fluorine groups along the lines of thickness of the modified film and towards the outmost surface layer, resulting from the migration of fluorinated blocks to the air side surface of the modified PUA film during the film formation process. However, the PUA film can not be modified effectively by adding the sodium salt of PATF, since the urethane groups in the system are easy to occupy on the surface of the film.     

A kinetic stability study of MN (MBe,Mg, Ca,Sr, and Ba)

This work describes a structure and kinetic stability study of some complexes with the general formula MN, where M are the alkaline earth metal atoms, Be, Mg, Ca, Sr, and Ba. A complex (A) with two points of attachment to the N₅ ring is the most energetically favored for all metals considered here. Except for Be, structure (B) containing a mono‐coordinated metal atom is a transition state corresponding to the metal atom transfer around the N₅ ring. Pyramidal structure (C) is kinetically unstable with the low isomerization barrier height, ranging from 0.9 to 6.7 kcal/mol. The dissociation barrier heights for the lowest energy isomers (A) are predicted to be 1.2–18.7 kcal/mol (Be to Ba), indicating that kinetic stability increases from lighter to heavier metal atoms. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

两性离子流动相测定杂多酸中的磷酸根、氯离子和硫酸根

采用离子色谱法测定杂多酸中痕量阴离子。由于常规的淋洗液(如Na2CO3,NaOH)呈碱性,使杂多酸迅速分解生成磷酸根,致使测定结果偏高。实验通过在常规淋洗液中加入适量两性离子后,调节淋洗液的pH为中性,从而能准确测定杂多酸中磷酸根氯离子和硫酸根的含量值。经过比较分别用去离子水和流动相稀释的样品中磷酸根的测定结果,确定淋洗液的最佳条件为2.5mmol/LNa2CO3-9.0mmol/LCHES,在该条件下测定,快速、准确、灵敏,且有较好的灵敏度和重现性。     

凝胶型聚合物电解质的电导率与温度的关系

凝胶型聚合物电解质的电导率与温度的关系孙晓光，林云青，齐力，景遐斌，王佛松（中国科学院长春应用化学研究所长春１３００２２）关键词凝胶电解质，离子电导率，活化能无定形聚合物电解质电导与温度的依赖关系一般可用Ｖｏｇｅｌ－Ｔａｍｍａｎ－Ｆｕｌｃｈｅｒｃ（Ｖ...     

离子敏感场效应晶体管及其应用

离子敏感场效应晶体管具有若干不同于寻常传感器的特点：超小型、全固态、集成化和自身阻抗变换等。它是一种很有发展前途的传感器。本文了讨论了离子敏感场效应晶体管的分类、结构和性能；评述了１９８９年以来其在临床医学和流动注射分析等方面的应用。引参考文献６７篇。     

电场对含高氯酸锂盐的互穿网络高分子快离子导体的电导的影响

研究了直流电场对含ＬｉＣｌＯ４的聚氧化乙烯（ＰＥＯ）４００与环氧树脂形成的液晶态互穿网络高分子忆禽子导体的电导率的影响。在室温至９０℃范围内，电导率随外加电压增加面降低。外加电压越高，对电导率变化的影响越大。     

痕量Au Bi和Cd的萃取浮选及原子吸收光谱法测定

浮选法分离痕量金属离子,由于灵敏度高、选择性强已得到广泛应用。本文利用浮选法使Au~(3 )、Bi~(3 )和Cd~(2 )同KBr反应生成的络合阴离子与碱性染料罗丹明B(RB)生成既疏水又疏有机溶剂的三元离子缔合物,后者经甲苯浮选分出,用二甲基甲酰胺(DMF)溶解后,可用原子吸收法测定Au、Bi和Cd的含量。本方法用于海水,锌片和矿样中上述三种元素的微量测定,可提高检测灵敏度,而且K、Na、Ca、Mg等共存离子不生干扰。具体实验方法如下:     

包含中间化合物二元相图的热力学分析

对包含中间化台物的二元系,若相图中液相线已测定,而化合物的生成熵或生成焓已知,且液相的过剩熵也被测定(或者可以假设为零),那么体系液相的热力学性质可以精确地计算出来。本文给出了包含中间化合物体系的相图与热力学性质间的关系;这一关系表明:大多致情况下,已知以下五个量中的任意三个,可将其它两个计算出来。这五个量是:相图中的液相线,中间化合物的生成焓及生成熵,液相的混合焓及混合熵。