Supramolecular Luminescent Lanthanide Dimers for Fluoride Sequestering and Sensing

Lanthanide complexes (Ln=Eu, Tb, and Yb) that are based on a C₂‐symmetric cyclen scaffold were prepared and characterized. The addition of fluoride anions to aqueous solutions of the complexes resulted in the formation of dinuclear supramolecular compounds in which the anion is confined into the cavity that is formed by the two complexes. The supramolecular assembly process was monitored by UV/Vis absorption, luminescence, and NMR spectroscopy and high‐resolution mass spectrometry. The X‐ray crystal structure of the europium dimer revealed that the architecture of the scaffold is stabilized by synergistic effects of the Eu? F? Eu bridging motive, π stacking interactions, and a four‐component hydrogen‐bonding network, which control the assembly of the two [EuL] entities around the fluoride ion. The strong association in water allowed for the luminescence sensing of fluoride down to a detection limit of 24 nM .     

Improvement in the Physicochemical Properties of Ketoconazole through Complexation with Cyclodextrin Derivatives

Highly-soluble cyclodextrin derivatives, such as hydroxypropyl--cyclodextrin(HP--CD) and methyl--cyclodextrin (MEB), were tested as solubilizingagents for ketoconazole, with the aim of improving the physicochemical andbiopharmaceutical properties of this lipophilic imidazole antifungal agent. Productswere prepared in four molecular ratios by physical mixing, kneading and spray-dryingmethods. The kneaded products in a ratio of 1:2 and the spray-dried products exhibitedthe highest dissolution rates. The phase solubility diagrams of ketoconazole with thesecyclodextrins at 25 °C in water and in simulated intestinal medium wereconstructed. A solubility diagram of A_L type was obtained with HP--CD, and one of A_P type with MEB. The complexes were characterized by thermal methods(DSC, TG, DTG and DTA). Multicomponent systems were prepared with tartaric acid.The effects of water-soluble polymers, e.g., polyvinylpyrrolidone, on the aqueous solubility of ketoconazole were investigated. Particle size distribution, surface area, partition coefficient, heat of dissolution and wettability studies were also carried out. The formation of inclusion complexes was observed by means of thermoanalytical studies.     

Determination of bisphenol-type contaminants from food packaging materials in aqueous foods by solid-phase microextraction-high-performance liquid chromatography

A fast screening method consisting of off-line solid-phase microextraction coupled to HPLC and fluorescence detection, suitable for the analysis of several bisphenol derivatives and their degradation products in aqueous solution, has been developed. Detection limits of 0.7 ng ml(-1) for 2,2-bis[4-(glycidyloxy)phenyl]propane, 0.9 ng ml(-1) for bisphenol A bis(3-chloro-2-hydroxypropyl)ether, 1.1 ng ml(-1) for 2,2-bis(4-hydroxyphenyl)propane and 2.4 ng ml(-1) for bisphenol F diglycidyl ether have been achieved working in the linear range 10-500 ng ml(-1). The good analytical features achieved make the proposed method an interesting option for the direct determination of these compounds in aqueous canned food such as peas, tuna, olives, maize, artichokes or palm hearts. Both the optimization process and the results, including the analysis of real samples, are given and discussed.     

Purification of neutral protease by dye affinity chromatography

Twenty triazinic dyes were assayed as ligands for the chromatographic affinity purification of a neutral protease from Flavourzyme^™, a commercial preparation. Screening at pH 4.0 allowed the selection of eight dyes on the basis of their high protease adsorption. When the pH was set to 5.0 in order to increase selectivity, only Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A maintained protease adsorption at high values. Neither maximum capacities nor dissociation constants calculated from isotherms measured at 8 and 25°C showed great differences. By contrast, a strong temperature effect was evidenced in the elution step: elution at 8°C allowed 70, 81, and 98% recovery of adsorbed protease with Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A, respectively, whereas only 20% recovery was attained at 25°C. Based on the results obtained, a purification process for the neutral protease contained in Flavourzyme with Cibacron Blue F3G-A as the affinity ligand was developed, yielding 96% of electrophoretically pure enzyme in a single step, the specific activity rising from 850 to 3650 U/mg.     

Reactions ofn-hexane andn-nonane on Pt catalysts and hydrogenating off hydrocarbonaceous adspecies after reaction

n-Hexane andn-nonane were reacted on Pt black, 6% Pt/SiO₂, 0.8% Pt/KL zeolite and a 0.6% industrial Pt/Al₂O₃ catalyst. Selectivities were compared at ∼10% conversion. After reaction, the catalyst was exposed to H₂ and the hydrocarbons leaving the catalysts were analyzed. The amount of hydrocarbons left the catalysts decreased in the sequence Pt black>Pt/SiO₂>Pt/KL>Pt/Al₂O₃. The composition of removed hydrocarbons gave important—although indirect—information on the possible state of “hydrocarbonaceous deposits” during catalysis.     

Recycling of Primary Lithium Batteries Production Residues

Production waste of primary lithium batteries constitutes a considerable secondary lithium feedstock. Although the recycling of lithium batteries is a widely studied field of research, the metallic residues of non-rechargeable lithium battery production are disposed of as waste without further recycling. The risks of handling metallic Li on a large scale typically prevent the metal from being recycled. A way out of this situation is to handle Li in an aqueous solution, from where it can be isolated as Li₂CO₃. However, the challenge in hydrometallurgical treatment lies in the high energy release during dissolution and generation of H₂. To reduce these process-related risks, the Li sheet metal punching residues underwent oxidative thermal treatment from 300 to 400 °C prior to dissolution in water. Converting Li metal to Li₂O in this initial process step results in an energy release reduction of ∼70 %. The optimal oxidation conditions have been determined by experimental design varying three factors: temperature, Li metal sheet thickness, and residence time. With 96.9±2.6 % almost the entire Li amount is converted to Li₂O, after 2.5 h treatment at 400 °C for a Li sheet thickness of 1.99 mm. Final precipitation with CO₂ yields 85.5±3.0 % Li₂CO₃. Using pure Li sheets, the product Li₂CO₃ is obtained in battery-grade quality (>99.5 %). Non-precipitated Li is recirculated into the process on the stage of dissolving Li₂O, thus avoiding loss of material.     

Submicellar liquid chromatography with fluorescence detection improves the analysis of naproxen in plasma and brain tissue

Rapid, simple, and sensitive submicellar liquid chromatography with fluorescence detection was developed and validated to quantify naproxen in plasma and brain samples after oral administration of Naproxen formulations. The method used tramadol as an internal standard. Different submicellar mobile phases with organic phases ranging from 40 to 60% were studied to improve the native fluorescence of the Naproxen and decrease retention times. Separation was done in a Zorbax SB C8 column (250 × 4.6 mm, 5 μm) with a mobile phase containing acidic 0.007 M sodium dodecyl sulfate/acetonitrile (50:50, v/v) at a flow rate of 1 mL/min. Detection was performed with an excitation wavelength of 280 nm and emission of 310 nm and 360 nm for internal standard and Naproxen, respectively. The method was validated by International Conference of Harmonization standards. The method is specific, accurate, and precise (relative standard deviation <3%). Limits of detection and quantification were 0.08 and 0.25 μg/mL, respectively, for biological samples. This method was applied to analyze brain/plasma ratios in mice that had received oral administrations of Naproxen micellar formulations containing 10% w/w of sodium dodecyl sulfate, Cremophor RH 40, or Tween 80. The sodium dodecyl sulfate micelles were faster and more widely distributed in the mouse brains.     

Microalgae Biomass as a New Potential Source of Sustainable Green Lubricants

Lubricants are materials able to reduce friction and/or wear of any type of moving surfaces facilitating smooth operations, maintaining reliable machine functions, and reducing risks of failures while contributing to energy savings. At present, most worldwide used lubricants are derived from crude oil. However, production, usage and disposal of these lubricants have significant impact on environment and health. Hence, there is a growing pressure to reduce demand of this sort of lubricants, which has fostered development and use of green lubricants, as vegetable oil-based lubricants (biolubricants). Despite the ecological benefits of producing/using biolubricants, availability of the required raw materials and agricultural land to create a reliable chain supply is still far from being established. Recently, biomass from some microalgae species has attracted attention due to their capacity to produce high-value lipids/oils for potential lubricants production. Thus, this multidisciplinary work reviews the main chemical-physical characteristics of lubricants and the main attempts and progress on microalgae biomass production for developing oils with pertinent lubricating properties. In addition, potential microalgae strains and chemical modifications to their oils to produce lubricants for different industrial applications are identified. Finally, a guide for microalgae oil selection based on its chemical composition for specific lubricant applications is provided.     

Chemoselective Preparation of New Families of Phenolic-Organoselenium Hybrids—A Biological Assessment

Being aware of the enormous biological potential of organoselenium and polyphenolic compounds, we have accomplished the preparation of novel hybrids, combining both pharmacophores in order to obtain new antioxidant and antiproliferative agents. Three different families have been accessed in a straightforward and chemoselective fashion: carbohydrate-containing N-acylisoselenoureas, N-arylisoselenocarbamates and N-arylselenocarbamates. The nature of the organoselenium framework, number and position of phenolic hydroxyl groups and substituents on the aromatic scaffolds afforded valuable structure–activity relationships for the biological assays accomplished: antioxidant properties (antiradical activity, DNA-protective effects, Glutathione peroxidase (GPx) mimicry) and antiproliferative activity. Regarding the antioxidant activity, selenocarbamates 24–27 behaved as excellent mimetics of GPx in the substoichiometric elimination of H₂O₂ as a Reactive Oxygen Species (ROS) model. Isoselenocarbamates and particularly their selenocarbamate isomers exhibited potent antiproliferative activity against non-small lung cell lines (A549, SW1573) in the low micromolar range, with similar potency to that shown by the chemotherapeutic agent cisplatin (cis-diaminodichloroplatin, CDDP) and occasionally with more potency than etoposide (VP-16).