Gas chromatographic quantitative analysis of methanol in wine: operative conditions, optimization and calibration model choice

The influence of the wine distillation process on methanol content has been determined by quantitative analysis using gas chromatographic flame ionization (GC-FID) detection. A comparative study between direct injection of diluted wine and injection of distilled wine was performed. The distillation process does not affect methanol quantification in wines in proportions higher than 10%. While quantification performed on distilled samples gives more reliable results, a screening method for wine injection after a 1:5 water dilution could be employed. The proposed technique was found to be a compromise between the time consuming distillation process and direct wine injection. In the studied calibration range, the stability of the volatile compounds in the reference solution is concentration-dependent. The stability is higher in the less concentrated reference solution. To shorten the operation time, a stronger temperature ramp and carrier flow rate was employed. With these conditions, helium consumption and column thermal stress were increased. However, detection limits, calibration limits, and analytical method performances are not affected substantially by changing from normal to forced GC conditions. Statistical data evaluation were made using both ordinary (OLS) and bivariate least squares (BLS) calibration models. Further confirmation was obtained that limit of detection (LOD) values, calculated according to the 3sigma approach, are lower than the respective Hubaux-Vos (H-V) calculation method. H-V LOD depends upon background noise, calibration parameters and the number of reference standard solutions employed in producing the calibration curve. These remarks are confirmed by both calibration models used.     

Equivariant quantum cohomology of the odd symplectic Grassmannian

Mathematische Zeitschrift - The odd symplectic Grassmannian $$\mathrm {IG}:=\mathrm {IG}(k, 2n+1)$$ parametrizes k dimensional subspaces of $${\mathbb {C}}^{2n+1}$$ which are isotropic with respect...     

Nonsingular systems of generalized Sylvester equations: An algorithmic approach

We consider the uniqueness of solution (i.e., nonsingularity) of systems of r generalized Sylvester and ?‐Sylvester equations with n×n coefficients. After several reductions, we show that it is sufficient to analyze periodic systems having, at most, one generalized ?‐Sylvester equation. We provide characterizations for the nonsingularity in terms of spectral properties of either matrix pencils or formal matrix products, both constructed from the coefficients of the system. The proposed approach uses the periodic Schur decomposition and leads to a backward stable O(n³r) algorithm for computing the (unique) solution.     

Densely Functionalized 2-Methylideneazetidines: Evaluation as Antibacterials

Twenty-two novel, variously substituted nitroazetidines were designed as both sulfonamide and urethane vinylogs possibly endowed with antimicrobial activity. The compounds under study were obtained following a general procedure recently developed, starting from 4-nitropentadienoates deriving from a common β-nitrothiophenic precursor. While being devoid of any activity against fungi and Gram-negative bacteria, most of the title compounds performed as potent antibacterial agents on Gram-positive bacteria (E. faecalis and three strains of S. aureus), with the most potent congener being the 1-(4-chlorobenzyl)-3-nitro-4-(p-tolyl)azetidine 22, which displayed potency close to that of norfloxacin, the reference antibiotic (minimum inhibitory concentration values 4 and 1–2 μg/mL, respectively). Since 22 combines a relatively efficient activity against Gram-positive bacteria and a cytotoxicity on eucharyotic cells only at 4-times higher concentrations (inhibiting concentration on 50% of the cultured eukaryotic cells: 36 ± 10 μM, MIC: 8.6 μM), it may be considered as a promising hit compound for the development of a new series of antibacterials selectively active on Gram-positive pathogens. The relatively concise synthetic route described herein, based on widely available starting materials, could feed further structure–activity relationship studies, thus allowing for the fine investigation and optimization of the toxico-pharmacological profile.     

X‐ray absorption study of the local structure at the NiO/oxide interfaces

This work reports an X‐ray absorption near‐edge structure (XANES) spectroscopy study at the Ni K‐edge in the early stages of growth of NiO on non‐ordered SiO₂, Al₂O₃ and MgO thin films substrates. Two different coverages of NiO on the substrates have been studied. The analysis of the XANES region shows that for high coverages (80 Eq‐ML) the spectra are similar to that of bulk NiO, being identical for all substrates. In contrast, for low coverages (1 Eq‐ML) the spectra differ from that of large coverages indicating that the local order around Ni is limited to the first two coordination shells. In addition, the results also suggest the formation of cross‐linking bonds Ni—O—M (M = Si, Al, Mg) at the interface.     

Trace level vanadium determination using thermal lens spectrophotometry

Trace level vanadium determination is reported using a dual beam thermal lens spectrometer. The thermal lens was generated using an argon ion beam laser (pump beam) which was focused into a sample cuvette. The thermal lens signal (TLs) was monitored with a He-Ne laser beam and a photodiode detector. Multichannel averager software was developed for processing the transient TLs. The optimal set up, ensuring maximum sensitivity and linear calibration graphs was obtained using experimental design techniques. Under optimized conditions, the detection limits for aqueous and ethanol-water (2+3 v/v) and (4+1 v/v) vanadium complex solutions were, respectively, 0.0071 mg/l, 0.0065 and 0.0039 mg/l.     

Study of ionizing radiation on the properties of polyamide 6 with fiberglass reinforcement

The use of polymers reinforced with fiberglass is becoming more and more common in the switches for household industries. These compounds perform a good tension resistance to the impact and the humidity absorption being used at the present time and also are in the automobile industry in parts underneath the hood, especially in the radiator frames. The aim of this work is to study the effect of ionizing radiation on the properties of polyamide 6 with fiberglass reinforcement and undergone to different irradiation doses. Samples were prepared and irradiated on JOB 188 accelerator with an electron beam energy of 1.5 MeV in air with different doses and a dose rate of 27.99 kGy/h. Afterward, the properties of the non-irradiated and irradiated polyamide 6 with fiberglass reinforcement were evaluated.     

TiO2-based photocatalysts impregnated with metallo-porphyrins employed for degradation of 4-nitrophenol in aqueous solutions: role of metal and macrocycle

Photodegradation of organic compounds in water solutions by means of economically advantageous and environment-friendly processes is a topic of growing interest. In recent years a great attention has been devoted to TiO₂-based photocatalysts for the oxidative degradation of various organic pollutants. In this context, we have prepared new photo-catalytic polycrystalline TiO₂ systems impregnated with sensitizers, i.e., copper, iron or manganese porphyrins, and investigated their photoactivity for 4-nitrophenol oxidation compared with that of bare TiO₂. A significant improvement of the photoreactivity was observed in the case of TiO₂ impregnated with copper porphyrin, while only a slight beneficial effect was observed in the case of iron porphyrin. In contrast, the presence of manganese porphyrin appeared to be detrimental.     

Bayesian Analysis of Extreme Values by Mixture Modeling

Modeling of extreme values in the presence of heterogeneity is still a relatively unexplored area. We consider losses pertaining to several related categories. For each category, we view exceedances over a given threshold as generated by a Poisson process whose intensity is regulated by a specific location, shape and scale parameter. Using a Bayesian approach, we develop a hierarchical mixture prior, with an unknown number of components, for each of the above parameters. Computations are performed using Reversible Jump MCMC. Our model accounts for possible grouping effects and takes advantage of the similarity across categories, both for estimation and prediction purposes. Some guidance on the specification of the prior distribution is provided, together with an assessment of inferential robustness. The method is illustrated throughout using a data set on large claims against a well-known insurance company over a 15-year period.     

Properties of the period function for some Hamiltonian systems and homogeneous solutions of a semilinear elliptic equation

In this work we study the period function T of solutions to the conservative equation x^″(t)+f(x(t))=0. We present conditions on f that imply the monotonicity and convexity of T. As a consequence we obtain the criterium established by C. Chicone and find conditions easier to apply. We also get a condition obtained by Cima, Gasull and Mañosas about monotonicity and, following some of their calculations, present results on the period function of Hamiltonian systems where H(x,y)=F(x)+n^-1|y|ⁿ. Using the monotonicity of T, we count the homogeneous solutions to the semilinear elliptic equation Δu=γu^γ-1 in two dimensions.