Improved spectrophotometric vitellogenin determination via alkali-labile phosphate in fish plasma–a cost effective approach for assessment of endocrine disruption

Vitellogenin (VTG) is a well known protein biomarker for exposure to environmental estrogens and possible endocrine disruption in fish. VTG is very dominant in plasma after the onset of vitellogenesis and the protein is heavily phosphorylated. This enables indirect quantification through measurement of alkali-labile protein bound phosphate (ALP) as an alternative to the more expensive enzyme linked immunosorbent assay. Good correlation has previously been shown between ALP and actual VTG levels but little effort has been made to investigate the method in an analytical way e.g., to assure the origin of the measured phosphate. During this method development care has been taken to rule out non-VTG sources of phosphate such as phospholipids and free phosphate in the blood plasma. Sample preparation has been simplified and unnecessary steps have been omitted. The common spectrophotometric measurement for ALP involves measurement at two wavelengths and calculation of corrected absorbance values. With a quick phase separation step the spectrophotometric phosphate determination using molybdic acid and ascorbic acid has been improved and all matrix interference has been eliminated. The final ALP method presented here has a detection limit of 3.2 µg PO₄ ^3?/ml plasma which is six times lower than similar methods and it also has less variability. A high sample throughput in comparison to previous ALP methods is possible after scaling down sample and reagent volumes to fit in a 96 well microtiter plate. The cost for buying all chemicals and plastic consumer goods for setting up the indirect protocol for the analysis of 1000 samples is only circa 350 euro. This is only 1% of the material cost for buying commercially available test kit for direct quantification of VTG in the same number of samples. The ALP method should thus be of interest also for applied scientists outside advanced research laboratories.     

Dielectric properties of lignin and glucomannan as determined by spectroscopic ellipsometry and Lifshitz estimates of non-retarded Hamaker constants

We present in this study a quantitative estimate of the dispersive interactions between lignin, hemicellulose and cellulose, which are the dominating components in wood and also extensively used to produce paper and packaging materials. The dielectric properties in the UV-visible region of spin-coated films of pure lignin and glucomannan were determined by spectroscopic ellipsometry. The non-retarded Hamaker constants were estimated from the determined spectral parameters using Lifshitz theory for lignin and glucomannan interacting with cellulose, titania and calcium carbonate in vacuum, water and hexane. The Hamaker constants for the different combinations of cellulose, lignin and glucomannan fall within a relatively narrow range of 35–58 and 8–17 zJ, for the values in vacuum (air) and water, respectively. The estimated Hamaker constants for the interactions of the wood components with TiO₂ and CaCO₃, common additives in paper, in water range from 3 to 19 zJ, thus being similar in magnitude as the interactions between the wood components themselves. In contrast, the Hamaker constant is essentially zero for glucomannan interacting with calcium carbonate in hexane. The Hamaker constants for lignin, hemicellulose and cellulose determined in this study can provide information regarding the surface interactions important for e.g. adhesion, friction, swelling and wetting in paper processing as well as for the resulting behavior of paper products.     

Organocatalytic strategies for the construction of optically active imidazoles, oxazoles, and thiazoles

This study demonstrates the first enantioselective synthesis of hydroxyalkyl- and aminoalkyl-substituted imidazoles, oxazoles, and thiazoles. The approach developed utilizes a highly effective one-pot reaction cascade that consists of either an organocatalytic epoxidation or aziridination of α,β-unsaturated aldehydes coupled with a [3+2]-annulation, in which amidines, ureas, or thioureas act as effective 1,3-dinucleophilic species. The methodology described benefits from low catalyst loadings, commercially and readily available starting materials, and mild reaction conditions.     

Anisotropy of cell wall polymers in branches of hardwood and softwood: a polarized FTIR study

The mechanical and physical properties of wood fibres are dependent on the organisation of their constituent polymers (cellulose, hemicellulose and lignin). Fourier Transform Infrared (FTIR) microscopy was used to examine the anisotropy of the main wood polymers in isolated cell wall fragments from branches of maple and Serbian spruce. Polarised FTIR measurements indicated an anisotropy, i.e. orientation of the cellulose microfibrils that was more or less parallel to the longitudinal axis of the cell wall. The hemicelluloses, glucomannan and xylan appeared to have a close link to the orientation of the cellulose and, thus, an orientation more parallel to the axis of the cell wall. An important result is that, in both maple and spruce samples, lignin was found to be organised in a parallel way in relation to the longitudinal cell wall axis, as well as to the cellulose. The results show that, despite the different lignin precursors and the different types of hemicelluloses in these two kinds of wood, lignin has a similar orientation, when it comes to the longitudinal axis of the cell wall.     

Phase behavior and rheological properties of DNA-cationic polysaccharide mixtures

Associative aqueous mixtures over a range of concentrations of double- (ds) or single- (ss) stranded DNA with dilute or semidilute solutions of two cationic derivatives of hydroxyethyl cellulose (cat-HEC and cat-HMHEC,(1) the latter carrying grafted hydrophobic groups), were studied. The phase behavior showed an interesting asymmetry: Phase separation occurred immediately when small (sub-stoichiometric) amounts of cationic polyelectrolyte were added to the DNA solution, but redissolution into a single cat-(HM)HEC/DNA/H(2)O phase occurred already with a modest charge excess of the cationic polyelectrolyte, at a charge ratio approximately independent of the overall polyelectrolyte concentration. Cat-HEC/dsDNA/H(2)O and cat-HEC/ssDNA/H(2)O systems presented a considerable difference in the extension of the phase separation region. The one-phase samples with excess cationic polyelectrolyte were studied by rheology. The presence of DNA strengthened the viscoelastic behavior of the solutions of the cationic polyelectrolytes, reflected in an increase in storage modulus and viscosity. Differences in phase behavior and rheology were observed, particularly between systems containing cat-HEC or cat-HMHEC, but also between dsDNA and ssDNA. Thus, these systems allow for the preparation of DNA formulations with widely variable rheology and water uptake.     

Moisture uptake in native cellulose – the roles of different hydrogen bonds: a dynamic FT-IR study using Deuterium exchange

This paper aims at a better understanding of the interaction between cellulose and moisture. In particular, the role of different hydrogen bonds in moisture uptake is investigated. Dynamic Fourier transform infrared spectroscopy (FT-IR) has been used in combination with deuterium exchange, which permits the labelling of cellulose domains with different accessibilities. The static spectra indicate a marked exchange of deuterium for the O2–H⋯O6 bonds, but only a limited exchange for the O3–H⋯O5 bonds. In the dynamic FT-IR spectra, deuteration gives rise to the growth of a broad band at wavenumbers around 2500 cm⁻¹. The rather unstructured appearance of the band suggests that deuteration is occurring only on the surface of the cellulose crystallites, i.e. in more or less non-load-carrying parts. This is corroborated by the lack of split peaks related to OD bonds in this band. In agreement with these observations, the split peak related to O3–H⋯O5 bonds and assigned to the load carrying cellulose structure increases during both H₂O and D₂O moisture conditioning, indicating a shift of the load transfer towards the backbone of the cellulose structure.     

A Highly Active Ylide‐Functionalized Phosphine for Palladium‐Catalyzed Aminations of Aryl Chlorides

Ylide‐functionalized phosphine ligands (YPhos) were rationally designed to fit the requirements of Buchwald–Hartwig aminations at room temperature. This ligand class combines a strong electron‐donating ability comparable to NHC ligands with high steric demand similar to biaryl phosphines. The active Pd species are stabilized by agostic C?H???Pd rather than by Pd–arene interactions. The practical advantage of YPhos ligands arises from their easy and scalable synthesis from widely available, inexpensive starting materials. Benchmark studies showed that YPhos‐Pd complexes are superior to the best‐known phosphine ligands in room‐temperature aminations of aryl chlorides. The utility of the catalysts was demonstrated by the synthesis of various arylamines in high yields within short reaction times.     

Anaerobic treatment of animal byproducts from slaughterhouses at laboratory and pilot scale

Different mixtures of animal byproducts, other slaughterhouse waste (i.e., rumen, stomach and intestinal content), food waste, and liquid manure were codigested at mesophilic conditions (37°C) at laboratory and pilot scale. Animal byproducts, including blood, represent 70–80% of the total biogas potential from waste generated during slaughter of animals. The total biogas potential from waste generated during slaughter is about 1300 MJ/cattle and about 140 MI/pig. Fed-batch digestion of pasteurized (70°C, 1h) animal byproducts resulted in a fourfold increase in biogas yield (1.14L/g of volatile solids [VS]) compared with nonpasteurized animal bypproducts (0.31L/g of VS). Mixtures with animal byproducts representing 19–38% of the total dry matter were digested in continuous-flow stirred tank reactors at laboratory and pilot scale. Stable processes at organic loading rates (OLRs) exceeding 2.5g of VS/(L·d) and hydraulic retention times (HRTs) less than 40 d could be obtained with total ammonia nitrogen concentrations (NH₄−N+NH₃−N) in the range of 4.0–5.0 g/L. After operating one process for more than 1.5 yr at total ammonia nitrogen concentrations >4 g/L, an increase in OLR to 5 g of VS/(L·d) and a decrease in HRT to 22 d was possible without accumulation of volatile fatty acids.