Image registration based on matrix perturbation analysis using spectral graph

We present a novel perspective on characterizing the spectral correspondence between nodes of the weighted graph with application to image registration. It is based on matrix perturbation analysis on the spectral graph. The contribution may be divided into three parts. Firstly, the perturbation matrix is obtained by perturbing the matrix of graph model. Secondly, an orthogonal matrix is obtained based on an optimal parameter, which can better capture correspondence features. Thirdly, the optimal matching matrix is proposed by adjusting signs of orthogonal matrix for image registration. Experiments on both synthetic images and real-world images demonstrate the effectiveness and accuracy of the proposed method.     

Polarization-dependent two-color dispersion wave generation and evolution in polarization-maintaining photonic crystal fiber

We investigate the effect of the polarization state of the input pulses on the visible emissions in the anomalous dispersion region of polarization-maintaining photonic crystal fiber (PM-PCF), by using ～100 fs pump pulses whose central wavelength (1064 nm) is close to the second zero dispersion wavelength (1100 nm) of the fiber, where the soliton fission mechanisms play an important role. The experimental results show that the phase-matching two-color dispersive wave emission, one at 582 nm and the other at 600 nm, is polarization-dependent and frequency shift results from the different dispersion characteristics along the two orthogonal principal axes of PM-PCF. Furthermore, it is observed for the first time that the variation of the linear input polarization angles in 45° region almost has no influence on the output spectral profiles, and the break variation of the output spectrum exists when the angle between the polarization of the linear incident pulse and the fast-axis or the slow-axis of PM-PCF is 45°, which are attributed to the coupling between the two polarization modes in high birefringent PM-PCF.     

Acceptor Concentration Effects on Photovoltaic Response in the La1-xSrxMnO3/SrNbyTi1-yO3 Heterojunction

Photovoltaic response in the heterojunction of La1-x SrxMnO3/SrNby Ti1-yO3 （LSMO/SNTO） is analyzed theoretically based on the drift-diffusion model. It is found that the decrease of acceptor concentration in the La1-xSrxMnO3 layer of hereto junction can increase the peak value of photovoltaic signal and the speed of photovoltaic response, whereas the changing of donor concentration in the SrNby Ti1-yO3 layer has no such evident effect. Furthermore, the result also indicates that the modulation of Sr doping in La1-xSrxMnO3 is an effective method to accommodate the sensitivity and the speed of photovoltaic response for LSMO/SNTO photoelectric devices.     

Optical parametric chirped pulse amplification based on photonic crystal fibre

A compact two-stage optical parametric chirped pulse amplifier based on photonic crystal fibre is demonstrated.A 1064-nm soliton pulse is obtained in a home-made photonic crystal fibre (PCF) with femtosecond pulse pumping and then amplified to 2 mJ in an Nd:YAG regenerative amplifier.After the amplified pulses pass through the LBO crystal,the 532-nm double-frequency light with an energy of 0.8 mJ and a duration of over 100 ps at 10-Hz repetition rate is generated as a pump source in the following two-stage optical parametric amplification (OPA).The 850-nm chirped signal light gain from the stretcher is 1.5×10 4 in the first-stage OPA while it is 120 in the second-stage OPA.The total signal gain of optical parametric chirped pulse amplification (OPCPA) can reach 1.8×10 6.     

基于石墨烯振幅可调的宽带类电磁诱导透明超材料设计

基于石墨烯的电控特性提出了一种由金属线谐振器和"H"型谐振器组成的宽带可调的类电磁诱导透明(类EIT)超材料结构.首先,利用CST Microwave Studio软件对该超材料结构的透射特性进行了仿真.该结构在1.05—1.46 THz内的透射窗由金属线谐振器的等离子谐振和"H"型谐振器的电感-电容谐振干涉相消引起,且暗模式谐振器的数量增多导致了透射窗带宽的增加.其次,仿真模拟了该结构在不同石墨烯费米能级下的透射特性.当石墨烯费米能级由0 eV逐渐增加到1.5 eV时,该结构透射窗在1.05—1.46 THz内的平均透射振幅由87%逐渐减少到25%,实现了宽带可调.同时,通过仿真模拟该结构在1.26 THz下的电场分布对其透射机理进行了分析,并实验制备了类EIT超材料结构样品,且利用太赫兹时域光谱对样品进行了透射性能测试,测试结果与仿真分析的趋势基本一致.     

基于渐进添边的准循环压缩感知时延估计算法

针对时延估计问题中压缩感知类算法现有测量矩阵需要大量数据存储量的问题,提出了一种基于渐进添边的准循环压缩感知时延估计算法,实现了稀疏测量矩阵条件下接收信号时延的准确估计.该算法首先建立压缩感知与最大似然译码之间的理论桥梁,然后推导基于低密度奇偶校验码的测量矩阵的设计准则,引入渐进添边的思想构造具有准循环结构的稀疏测量矩阵,最后利用正交匹配追踪算法正确估计出时延.对本文算法的计算复杂度与测量矩阵的数据存储量进行理论分析.仿真结果表明,所提算法在测量矩阵维数相同的条件下正确重构概率高于高斯随机矩阵和随机奇偶校验测量矩阵,相比于随机奇偶校验矩阵,在数据存储量相等的条件下,以较少的计算复杂度代价得到了重构概率的较大提高.     

顺式羰基铑碘络合物催化甲醇制乙酸反应的动力学研究

本文运用密度泛函理论DFT-B3LYP方法,对铑、碘元素采用相对论校正赝势基组SDD,对C、O、H采用6-311+G(2d,p)基组,计算研究了顺式羰基铑碘络合物催化甲醇羰基化制乙酸反应的微观机理,优化了各反应物、中间体和过渡态的构型特征,用频率分析方法和内禀反应坐标方法对过渡态进行了验证,运用Kozuch撰写的能量跨度模型获得循环反应的动力学信息,确定了决定循环反应速率的决速过渡态和决速中间体,并利用转化频率评估了催化性能与温度的变化关系.     

定性检验牛奶中的营养素

利用常用仪器、微型实验和相应物质的特征反应,对牛奶中所含营养素进行定性检验,结果表明：牛奶中含有蛋白质、维生素、钙、镁、磷、钾、铁元素。该实验具有微型化、绿色化、简约化和生活化的特质。     

高温无铅BaTiO_3-(Bi_(1/2)Na_(1/2))TiO_3正温度系数电阻陶瓷阻抗和介电谱分析

采用固相反应法制备了Y2O3施主掺杂的92 mol%BaTiO3-8 mol%(Bi1/2Na1/2)TiO3(BBNT8)高温无铅正温度系数电阻(positive temperature coe?cient resistivity,PTCR)陶瓷.利用透射电镜观察材料的显微结构,发现陶瓷的显微结构主要包括晶粒和晶界两部分,观察不到明显的壳层结构.进一步利用交流阻抗谱研究了陶瓷的宏观电学性能,发现陶瓷的总电阻是晶粒和晶界两部分的贡献,而晶粒电阻很小,在居里温度以上变化不大,材料的PTCR效应主要是晶界部分的贡献.当温度高于居里温度时,随着温度的升高,晶界介电常数逐渐减小,导致势垒增加,晶界电阻增大,从而产生正温度系数效应.最后,通过测试材料的介电频谱特性,研究计算了陶瓷的室温电阻率.