Electrochemical investigation of gel polymer electrolytes based on poly(methyl methacrylate) and dimethylacetamide for application in Li-ion batteries

In the present work, gel polymer electrolytes (GPEs) were prepared using poly(methyl methacrylate) (PMMA), lithium perchlorate (LiClO₄) and dimethylacetamide as a plasticizer. Solution-casting technique was used to fabricate GPEs containing different weight percentage of PMMA. The degree of crystallinity of GPE samples was studied by X-ray diffraction (XRD) analysis. Fourier transform infrared (FT-IR) spectroscopy was applied to study the level of interactions between lithium salt and PMMA in the prepared GPEs. Electrochemical properties were studied by electrochemical impedance spectroscopy, linear sweep voltammetry and DC polarization techniques. Lithium ion conductivity of GPEs was determined by calculating the bulk resistance of polymer electrolytes from Nyquist plot. Increasing PMMA content of GPEs resulted in an improvement in the electrochemical potential window from 4.2 to 4.5 V. The highest lithium transference number (0.42) and also the best electrochemical properties were obtained for GPE containing 0.75 M LiClO₄ and 10 wt% PMMA. Scanning electron microscopy images of the optimized GPE showed a porous and heterogeneous surface structure which is desirable for application in Li-ion batteries.     

Trace determination of cadmium in rice samples using solidified floating organic drop microextraction based on vesicular supramolecular solvent followed by flow-injection analysis–flame atomic absorption spectrometry

In this work, a solidified floating organic drop microextraction was developed based on a vesicular supramolecular solvent consisting of decanoic acid and quaternary ammonium. The method was used for preconcentration of trace amount of cadmium in different rice samples followed by flow-injection analysis–flame atomic absorption spectrometry. Several parameters affecting the extraction efficiency including pH, concentration of 1-(2-pyridylazo)-2-naphthol as the chelating agent, sample and extraction solvent volume, stirring rate, extraction time, salt effect, and interfering ions were investigated and optimized. Under the optimum conditions, a preconcentration factor of 84 was achieved. LOD and LOQ were found to be 0.09 and 0.31 µg L^?1, respectively. The calibration curve was linear within the range of 5.0–700 µg L^?1 (r²?>?0.9978). Intra- and inter-day precisions (RSD% n?=?3) were estimated 2.7 and 3.9% at the concentration of 20 µg L^?1, respectively. The accuracy of the method was successfully validated by analysis of an SRM-1643f standard reference material. Relative recoveries were achieved within the range of 93–107% elucidating suitability of the method for determination of cadmium in rice samples.     

Synthesis and photocatalytic activity assessing of the TiO<Subscript>2</Subscript> nanocomposites modified by some lanthanide ions and tin-derivative sandwich-type polyoxometalates

New nanocomposites containing sandwich-type polyoxometalate of [(PW₉O₃₄)₂(HOSn^IVOH)₃]^12? (P₂W₁₈Sn₃) loaded onto Ln-doped TiO₂ (Nd, Sm, Dy, Tb) nanoparticles were synthesized and their catalytic activities were assessed. The Ln–TiO₂ nanoparticles and Ln–TiO₂/P₂W₁₈Sn₃ nanocomposites were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction, field emission scanning electron microscope, energy dispersive analysis of X-rays spectra and diffuse reflectance spectra. The photocatalytic efficiency of the Ln–TiO₂ and Ln–TiO₂/P₂W₁₈Sn₃ were examined in the photodegradation of methyl orange and methylene blue solutions. It was revealed through different characterization techniques that the P₂W₁₈Sn₃ was successfully loaded on the lanthanide-doped anatase phase TiO₂ nanoparticles and the particles diameter were relatively 20–30 nanometers. It was revealed that doping by the lanthanide ions followed by loading of polyoxometalates improves the photocatalytic performance of TiO₂ effectively. The effects of operational parameters and the kinetics of photocatalytic degradation under UV light were discussed. The prepared nanocomposites were stable and could be easily separated from the reaction system.     

Ultrasound-promoted green synthesis of 1,4-dihydropyridines using fuctionalized MWCNTs as a highly efficient heterogeneous catalyst

A new method for multi-component synthesis of 1,4-dihydropyridine derivatives (1,4-DHPs) in the presence of meglumine supported on multiwalled carbon nanotubes (MWCNTs@meglumine) as a new heterogeneous, highly efficient and reusable catalyst was investigated. The reaction was performed under ultrasonic irradiation in EtOH at room temperature. A new, highly efficient heterogeneous catalyst, short reaction times, high to excellent yield of products, and safe and clean conditions are the advantages of the presented method.     

Synthesis and Characterization of Chromium-Based Catalysts for Ethylene-1-hexene Copolymers Preparation via In-Situ Polymerization of Ethylene

The tandem catalysis system including the trimerization catalyst of CrCl₃/SNS (SNS = bis-(2-pentylsulfanyl-ethyl)-amine) (Cat 1) and the copolymerization catalyst Cat 2 of Cr/SiO₂ (Grace 643) has been prepared and used to the synthesis of branched polyethylene. The optimum polymerization conditions were found to be as follows: chromium concentration 0.2 wt %, ethylene pressure 23 bar, solvent hexane, polymerization temperature 90°C, co-catalyst triethylaluminum. The optimally prepared polyethylene was characterized thermally and morphologically. Appearance of α and γ hydrogens in ethylene-1-hexene copolymer confirms the presence of branches in polyethylene backbone.     

Friedel-Crafts acylation of aromatic compounds with carboxylic acids in the presence of P2O5/SiO2 under heterogeneous conditions

A convenient and efficient procedure for the Friedel-Crafts acylation of aromatic compounds with carboxylic acids in the presence of P₂O₅/SiO₂ is described. Both aromatic and aliphatic carboxylic acids reacted easily to afford the corresponding aromatic ketones. The use of non-toxic and inexpensive materials, simple and clean work-up, short reaction times and good yields of the products are the advantages of this method.     

An interlaboratory capillary zone electrophoresis-UV study of various monoclonal antibodies,instruments, and ε-aminocaproic acid lots

Capillary zone electrophoresis ultraviolet (CZE-UV) has become increasingly popular for the charge heterogeneity determination of mAbs and vaccines. The ε-aminocaproic acid (eACA) CZE-UV method has been used as a rapid platform method. However, in the last years, several issues have been observed, for example, loss in electrophoretic resolution or baseline drifts. Evaluating the role of eACA on the reported issues, various laboratories were requested to provide their routinely used eACA CZE-UV methods, and background electrolyte compositions. Although every laboratory claimed to use the He et al. eACA CZE-UV method, most methods actually deviate from He's. Subsequently, a detailed interlaboratory study was designed wherein two commercially available mAbs (Waters’ Mass Check Standard mAb [pI 7] and NISTmAb [pI 9]) were provided to each laboratory, along with two detailed eACA CZE-UV protocols for a short-end, high-speed, and a long-end, high-resolution method. Ten laboratories participated each using their own instruments, and commodities, showing excellence method performance (relative standard deviations [RSDs] of percent time-corrected main peak areas from 0.2% to 1.9%, and RSDs of migration times from 0.7% to 1.8% [n = 50 per laboratory], analysis times in some cases as short as 2.5 min). This study clarified that eACA is not the main reason for the abovementioned variations.     

Chiral selectors for enantioresolution and quantitation of the antidepressant drug fluoxetine in pharmaceutical formulations by (19)F NMR spectroscopic method

¹⁹F NMR spectroscopy was applied to the quantitative determination of fluoxetine enantiomers using different chiral recognition agents in pharmaceutical formulations. Several parameters affecting the enantioresolution including the type and concentration of chiral selector, concentration of fluoxetine and temperature were studied. The chiral selectors investigated are the cyclic oligosaccharides α-, β- and γ-cyclodextrin and a diamino derivative of methylated α-cyclodextrin (DAM-α-CD), linear polysaccharides (maltodextrin with dextrose equivalents of 4.0-7.0, 13.0-17.0 and 16.5-19.5) and the macrocyclic antibiotic vancomycin. Among the chiral selectors used, DAM-α-CD turned out to give the best resolution of the ¹⁹F NMR signals of (R)- and (S)-fluoxetine. The calibration curve was linear for (R)- and (S)-fluoxetine over the range 0.10-1.35 mg mL⁻¹, the detection limits (S/N = 3) being 5.9 and 7.5 μg mL⁻¹ for the pure solutions of (R)- and (S)-fluoxetine, respectively. The recovery studies performed on pharmaceutical samples ranged from about 90 to 110% with relative standard deviations of <8%. The results showed that the proposed method is rapid, precise and accurate. Applying statistical Student's t-test revealed insignificant difference between the real and measured contents at the 95% confidence level.     

The NIH analytical methods and reference materials program for dietary supplements

Quality of botanical products is a great uncertainty that consumers, clinicians, regulators, and researchers face. Definitions of quality abound, and include specifications for sanitation, adventitious agents (pesticides, metals, weeds), and content of natural chemicals. Because dietary supplements (DS) are often complex mixtures, they pose analytical challenges and method validation may be difficult. In response to product quality concerns and the need for validated and publicly available methods for DS analysis, the US Congress directed the Office of Dietary Supplements (ODS) at the National Institutes of Health (NIH) to accelerate an ongoing methods validation process, and the Dietary Supplements Methods and Reference Materials Program was created. The program was constructed from stakeholder input and incorporates several federal procurement and granting mechanisms in a coordinated and interlocking framework. The framework facilitates validation of analytical methods, analytical standards, and reference materials.