Assessment of Thermal Stability and Detonation Performance of 4-Amino-1,2,4-triazolium Nitrate as compared to 2,4,6-Trinitrotoluene for Melt-cast Explosives

4-Amino-1,2,4-triazolium nitrate (4-ATN) is an energetic and non-sensitive ionic liquid, which was introduced as a good candidate in previous works for the replacement of 2,4,6-trinitrotoluene (TNT) in melt-cast explosives. Since previous studies used pure nitric acid for nitration of 4-ATN, the effect of the use of low price industrial nitric acids (50 %, 70 % and 98 %) is investigated on the percent yields of 4-ATN. The thermogravimetric and differential scanning calorimetry (TGA/DSC) are done on the synthesized 4-ATN with impure nitric acid at a heating rate of 10 K · min^–1 by the vacuum system. The obtained TGA/DSC curves confirm decomposition of 4-ATN involving melting and dissociation. Derivative thermogravimetric (DTG) curves of 4-ATN at various heating rates are applied to obtain activation energy of thermolysis by several model-free techniques. The calculated activation energies are in the range 78.7–87.7 kJ · mol^–1, which are about 10 kJ · mol^–1 more than the reported activation energy of industrial TNT (purity 98.2 %), i.e. 66–70 kJ · mol^–1. Assessments of detonation performance of 4-ATN are also compared with TNT, which show higher detonation performance of 4-ATN. Thus, 4-ATN can be used with nitramine compounds as melt-cast explosives with higher thermal stability and detonation performance than corresponding nitramine compound/TNT explosives.     

One-pot synthesis of new hydantoin (thiohydantoin) derivatives and evaluation of their antibacterial and antioxidant activities

One-pot four-component reactions of phenacyl bromides, parabanic or thioparabanic acids, thiophenols, and triphenylphosphine in the presence of triethylamine afforded new derivatives of hydantoin or thiohydantoin in good to high yields (65%-90%). Their antibacterial activities were evaluated against two Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis) and two Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa). Among the synthesized compounds, the obtained products from 2-hydroxythiophenol exhibited higher antibacterial activity than those obtained from 2-aminothiophenol. Compound 9l including N,N′^′-diphenyl thiohydantoin moiety showed the highest antibacterial activity (26.0 ± 01.4) against B subtilis, in comparison with other synthesized samples. The antioxidant activities of the synthesized hydantoins and thiohydantoins were investigated by DPPH radical-scavenging based on Blois method. The results showed that all the compounds have high DPPH inhibition potency (77.4%-83.9%) that it could be due to existence of heteroatoms with lone pair electrons and exchangeable protons on their NH₂ and OH groups.     

Rapid and green synthesis of 4H-benzo[b]pyrans using triethanolamine as an efficient homogeneous catalyst under ambient conditions

Research on Chemical Intermediates - 4H-benzo[b]pyrans were obtained rapidly in high yields using triethanolamine as an efficient, eco-friendly and low-cost basic catalyst. One-pot three-component...     

Determination of personal care products in water using UHPLC–MS after solid phase extraction with mesoporous silica‐based MCM‐41 functionalized with cyanopropyl groups

A silica‐based MCM‐41 mesoporous material functionalized with cyanopropyl groups has been synthesized by cocondensation, characterized and applied to preconcentrate six parabens and three UV filters in river and swimming‐pool waters. The analytes were quantified by ultra‐high performance liquid chromatography‐tandem mass spectrometry, according to the Directive 96/23/EC. Even though matrix effect was negligible, quantification in river water samples with the standard addition approach improved the recoveries obtained using solvent‐based and even with matrix‐matched calibration. The method quantification limits in river water samples were 0.05 ng/mL for 2,4‐dihydroxybenzophenone and 0.01 ng/mL for the rest. Recoveries, evaluated for a concentration level of 0.5 ng/L, were in the range 93.5‐107.6% for parabens and in the range 64.2‐85.8% for UV filters, with relative standard deviations intraday ≤10.2 and 10.8%, respectively. This parameter, evaluated for a concentration level of 0.1 ng/L, ranged between 98.3 and 110.4% for parabens and between 61.9 and 89.9% for UV filters, with relative standard deviation intraday ≤15.3 and 15.5%, respectively. The two UV filters with lower recoveries were the most affected by the addition of sodium chloride. River and swimming pool waters were analyzed and all the personal care products were found in the swimming pool water, whereas only methylparaben was detected in the river water.     

Effect of polymerization of synthetic glycolipids on their supramolecular assemblies

Sugar-derived surfactants bearing a polymerizable acryloyl moiety on one of the branches of the double-chain hydrophobic tail were prepared. The non–ionic hydrophilic head and the biantennary hydrophobic tail were built on, respectively, an aspartic acid and a tris(hydroxymethyl)aminomethane core. Ultraviolet irradiation of aqueous dispersions of these surfactants above their transition phase temperature (T_c) was achieved. The morphology of self-assemblies produced in such a way were investigated by transmission electron microscopy. TEM photographs revealed that irradiation leads to the formation of unilamellar vesicles. Neither fibers nor tubules were detected in contrast to what was observed before polymerization.     

Reactions of p-quinone monoimines with lawesson reagent and phosphorus pentasulfide

2, 4-Bis-(4-methoxyphenyl)-1, 3, 2, 4-dithiadiphosphetane-2, 4-disulfide [Lawesson reagent (LR)] 1 reacts with p-quinone monoimine- 2a to give the novel benzo-1,3,2-oxathiaphosphol-5-(methanesulfonamido)-2-(4-methoxyphenyl)-2-sulfide 4 . On the other hand, the reaction of 2b and 3 with LR 1 leads to the formation of the benzo- and the naphtho-1,3,2-dithiaphosphol-5 -(benzenesulfonamido)- 2- (4-methoxyphenyl) -2-sulfide 5 , 6 . Thiation of 2a , 2b , and 3 with P₄S₁₀ yields phenoxathiin derivatives 8a , 8b , and 9 , respectively. The identity of the new products is established from analytical and spectroscopic evidence.     

Rigid tetranitroresorcinarenes

[reaction: see text]. o-alkylation of C2V-symmetrical resorcinarene tetraesters 2 with 2 equiv of 1,3-difluoro-4,6-dinitrobenzene readily affords conformationally rigid octanitro resorcinarene 3, which is a potential scaffold for the design of supramolecular structures.     

Synthesis and crystal structure of a new lithium cyclohexaphosphate hydrate: Li6P6O18·10H2O

The synthesis and crystal structure of a novel hydrate of lithium cyclohexaphosphate are reported. Li₆P₆O₁₈·10H₂O crystallizes in the space group C2/c with a = 15.113(5), b = 12.006(2), c = 15.892(2) Å, = 122.85(2)°, and Z = 4. The structure consists of P₆O₁₈ ring layers stacked along the c direction in between which are located the lithiumions and water molecules. Two LiO₄ tetrahedra share common edges with LiO₅ pseudosquare pyramids to form two independant Li₃O₉ units. About 50% of the water molecules have fractional occupancy rates and form fragments of molecules. A linear relationship is established between the relative cell volume V/Z and the hydration degree, n, for all the known hydrates: Li₆P₆O₁₈·nH₂O.