Electrochemical solid-phase microextraction of anions and cations using polypyrrole coatings and an integrated three-electrode device

A method for the extraction, transfer and desorption of anions and cations under controlled potential conditions employing a new integrated three-electrode device is described. The device, containing working, reference and counter electrodes, was prepared from tubes that could be moved vertically with respect to each other. In this way, a small amount of solvent, held by capillary force, remained between the electrodes when the device was lifted out of a solution after an extraction. This design allowed the potential control to be maintained at all times. With the new integrated device, it was possible to perform potential controlled desorption into vials containing as little as 200 microl of solution. The required ion exchange capacity was obtained by electrodeposition of a polypyrrole coating on the surface of the glassy carbon working electrode. Solid-phase microextractions of several cations or anions were performed simultaneously under potentiostatic control by doping the polypyrrole coating with different anions such as perchlorate and p-toluenesulfonate. The efficiency of the extractions, which could be altered by varying the potential of the working electrode, could be increased by 150 to 200% compared to extractions using normal solid-phase microextraction conditions under open circuit conditions. A constant potential of +1.0 V and -0.5 V with respect to the silver pseudo reference electrode, was found to be well-suited for the extraction of samples containing ppm concentrations of anions (chloride, nitrite, bromide, nitrate, sulfate and phosphate) and cations (cadmium, cobalt and zinc), respectively.     

New nucleoside analogs from 2-amino-9-(beta-D-ribofuranosyl)purine

Four novel derivatives of 2-amino-9-(beta-D-ribofuranosyl)purine (1) were synthesised and fully characterised. When 1 was reacted with chloroacetaldehyde (a), 2-chloropropanal (b), bromomalonaldehyde (c) and a mixture of chloroacetaldehyde + malonaldehyde (d), 3-(beta-D-ribofuranosyl)-imidazo-[1,2a]purine (2), 3-(beta-D-ribofuranosyl)-5-methylimidazo-[1,2a]purine (3), 3-(beta-D-ribofuranosyl)-5-formylimidazo-[1,2a]purine (4) and 9-(beta-D-ribofuranosyl)-2-(3,5-diformyl-4-methyl-1,4-dihydro-1-pyridyl)purine (5) were formed, respectively. The products were isolated, purified by chromatography and characterised by MS, complete NMR assignment as well as fluorescence and UV spectroscopy. The yields of these reactions were moderate (14-20%). The fluorescence properties differed from those of the starting compound and the quantum yields were considerably lower.     

Recoil spectrometry: Ion accelerator based elemental characterisation of surface layers

Recoil Spectrometry covers a group of techniques that are very similar to the well known Rutherford backscattering Spectrometry technique, but with the important difference that one measures the recoiling target atom rather than the projectile ion. This makes it possible to determine both the identity of the recoil and its depth of origin from its energy and velocity, using a suitable detector system. The incident ion is typically high-energy (30–100MeV)³⁵C1,⁸¹Br or¹²⁷I. Low concentrations of light elements such as C, O and N can be profiled in a heavy matrix such as Fe or GaAs. Here we present an overview of mass and energy dispersive recoil Spectrometry and illustrate its successful use in some typical applications.     

Scattering of a potassium atom beam from potassium promoted catalyst surfaces via electronically excited clusters

Surface scattering of potassium atom beams is observed from surfaces of a potassium promoted catalyst, which is known to emit Rydberg K* species and clusters K _n ^* . The surfaces studied are cut flat from pellets of an industrial catalyst, the promoted iron oxide catalyst for styrene production. The scattering is studied in the temperature range 500–1000 K in an UHV apparatus with a K atom beam at 45° towards the normal, with surface ionization and ion detection over an angular range of ?90° to +90° with respect to the surface normal. Bilobular scattering patterns are observed, which are mainly back-scattering at low temperatures, below 750 K. A large signal due to ions emitted in the backwards direction is also found with a voltage on the sample. This back-scattering indicates that the scatterers are heavy clusters outside the surface. The ion formation in the backwards direction is proposed to be due to collisions with electronically excited clusters K _n ^* of the type recently observed by field ionization detection (Kotarba et al. 1994). The bilobular scattering transforms into asymmetric patterns with a larger forward (specular) lobe at higher temperatures, above 800 K. Only a small fraction of the beam molecules is scattered off the surface. The scattering is well described by inelastic surface scattering theory. This shows that the actual scattering surface is rather flat, which is proposed to be due to an antibonding Rydberg type interaction, of long range (hundreds of Å), between the impinging excited K atom and the surface. The temperature dependence of the neutral scattering gives a barrier of 0.96 eV, close to what is generally found for Rydberg species emission from such surfaces. At larger K surface densities, the contributions to the peaks from the beam flux is shown to agree with this picture involving collisions with excited clusters outside the surface.     

Insights into sulfinate formation from tosyl hydrazides

Benzylation of 1,2-ditosylhydrazine in DMF under various basic conditions results in a benzyl sulfone via intermediary sulfinate formation, providing new insights and allowing practical conclusions to be drawn. The half-lives of 1,2-ditosylhydrazine and several monotosylated hydrazides with 1,1,3,3-tetramethylguanidine in DMSO have been determined by ¹H NMR spectroscopy and are found to vary from a few minutes to several months. In the course of this work a benzylated, partly detosylated compound has been identified and a 1,1,3,3-tetramethyl guanidine-containing side-product characterized. A contradictory report is also commented on.     

P-type nitrogen-doped ZnO nanoparticles stable under ambient conditions

Zinc oxide is considered as a very promising material for optoelectronics. However, to date, the difficulty in producing stable p-type ZnO is a bottleneck, which hinders the advent of ZnO-based devices. In that context, nitrogen-doped zinc oxide receives much attention. However, numerous reviews report the controversial character of p-type conductivity in N-doped ZnO, and recent theoretical contributions explain that N-doping alone cannot lead to p-typeness in Zn-rich ZnO. We report here that the ammonolysis at low temperature of ZnO(2) yields pure wurtzite-type N-doped ZnO nanoparticles with an extraordinarily large amount of Zn vacancies (up to 20%). Electrochemical and transient spectroscopy studies demonstrate that these Zn-poor nanoparticles exhibit a p-type conductivity that is stable over more than 2 years under ambient conditions.     

Synthesis and photophysics of one mononuclear Mn(III) and one dinuclear Mn(III,III) complex covalently linked to a ruthenium(II) tris(bipyridyl) complex

The preparation of donor (D)-photosensitizer (S) arrays, consisting of a manganese complex as D and a ruthenium tris(bipyridyl) complex as S has been pursued. Two new ruthenium complexes containing coordinating sites for one (2a) and two manganese ions (3a) were prepared in order to provide models for the donor side of photosystem II in green plants. The manganese coordinating site consists of bridging and terminal phenolate as well as terminal pyridyl ligands. The corresponding ruthenium-manganese complexes, a manganese monomer 2b and dimer 3b, were obtained. For the dimer 3b, our data suggest that intramolecular electron transfer from manganese to photogenerated ruthenium(III) is fast, k(ET) > 5 x 10(7) s(-)(1).     

Detoxification of lignocellulose hydrolysates with ion-exchange resins

Lignocellulose hydrolysates contain fermentation inhibitors causing decreased ethanol production. The inhibitors include phenolic compounds, furan aldehydes, and aliphatic acids. One of the most efficient methods for removing inhibiting compounds prior to fermentation is treatment of the hydrolysate with ion-exchange resins. The performance and detoxification mechanism of three different resins were examined: an anion exchanger, a cation exchanger, and a resin without charged groups (XAD8). A dilute acid hydrolysate of spruce was treated with the resins at pH 5.5 and 10.0 prior to ethanolic fermentation with Saccharomyces cerevisiae. In addition to the experiments with hydrolysate, the effect of the resins on selected model compounds, three phenolics (vanillin, guaiacol, and coniferyl aldehyde) and two furan aldehydes (furfural and hydroxymethyl furfural), was determined. The cation exchanger increased ethanol production, but to a lesser extent than XAD-8, which in turn was less effective than the an ion exchanger. Treatment at pH 10.0 was more effective than at pH 5.5. At pH 10.0, the anion exchanger efficiently removed both anionic and uncharged inhibitors, the latter by hydrophobic interactions. The importance of hydrophobic interactions was further indicated by a substantial decrease in the concentration of model compounds, such as guaiacol and furfural, after treatment with XAD-8.     

Thickness difference induced pore structure variations in cellulosic separators for lithium-ion batteries

The pore structure of the separator is crucial to the performance of a lithium-battery as it affects the cell resistance. Herein, a straightforward approach to vary the pore structure of Cladophora cellulose (CC) separators is presented. It is demonstrated that the pore size and porosity of the CC separator can be increased merely by decreasing the thickness of the CC separator by using less CC in the manufacturing of the separator. As the pore size and porosity of the CC separator are increased, the mass transport through the separator is increased which decreases the electrolyte resistance in the pores of the separator. This enhances the battery performance, particularly at higher cycling rates, as is demonstrated for LiFePO₄/Li half-cells. A specific capacity of around 100 mAh g^?1 was hence obtained at a cycling rate of 2 C with a 10 µm thick CC separator while specific capacities of 40 and close to 0 mAh g^?1 were obtained for separators with thicknesses of 20 and 40 µm, respectively. As the results also showed that a higher ionic conductivity was obtained for the 10 µm thick CC separator than for the 20 and 40 µm thick CC separators, it is clear that the different pore structure of the separators was an important factor affecting the battery performance in addition to the separator thickness. The present straightforward, yet efficient, strategy for altering the pore structure hence holds significant promise for the manufacturing of separators with improved performance, as well as for fundamental studies of the influence of the properties of the separator on the performance of lithium-ion cells.