More than a decade has elapsed since the serious nature of the discrepancy between neutron dosimetry experiments (E) and neutron transport calculations (C) for the Hiroshima site was identified. Since that time extensive efforts to resolve this Hiroshima neutron dosimetry enigma have not only failed, but now demonstrate that the magnitude of this discrepancy is much greater than initially estimated. The currently evaluated E/C ratio for thermal neutron fluence at the Hiroshima site increases rapidly with increasing slant range from the epicenter. In the slant range region beyond 1000 m, E/C exceeds unity by one to two orders of magnitude depending on the specific dosimetry data that are utilized. Principal features that characterize the Hiroshima neutron dosimetry enigma are summarized. Puzzle Piece No. 6: In-situ production and Prompt fallout of radionuclides from Little Boy is advanced as a possible contributory phenomenon to this enigma. (The atom bomb detonated over Hiroshima was called Little Boy.) Measurements of 60Co and 152Eu specific activity at the Hiroshima site are used to obtain order of magnitude numerical estimates that show this conjecture is plausible. Comparison of different 60Co measurements at the Hiroshima site reveals that the variation of E/C with slant range depends on the method used to quantify 60Co specific activity as well as the type of dosimetry samples that are employed. These 60Co comparisons lend additional qualitative credence to this conjecture. Within the limits of presently available data, these assessments show that Puzzle Piece No. 6 qualitatively satisfies the principal features that characterize the Hiroshima neutron dosimetry enigma. Nevertheless, current lack of data prevent this conjecture from being conclusively confirmed or refuted. Consequently, specific recommendations are advanced to resolve the Hiroshima neutron dosimetry enigma with emphasis on experimental tests that can quantitatively evaluate Puzzle Piece No. 6. 相似文献
The conductivity of a spin-polarized two-dimensional electron gas is calculated and compared with the conductivity of the unpolarized electron gas. Disorder effects are considered within the self-consistent current relaxation theory, which gives rise to a crossover point from metallic to insulating behavior. Many-body effects due to exchange and correlation are taken into account and are described by a local-field correction. Our calculations are in good agreement with recent experimental results on the magnetoresistance of silicon inversion layers. 相似文献
The modification of the Au(1 1 1) Shockley-type surface state by an adsorbed monolayer of large π-conjugated molecules was investigated by high-resolution angle-resolved photoelectron spectroscopy (ARPES). We determined binding energy, band mass, and Rashba-splitting and discuss the results in the context of rare-gas adsorption on noble metals. This comparison allows the determination of the bonding strength of the adsorbates, found to be physisorptive with derived binding energies per molecule of 2.0 eV for perylene-tetracarboxylic-dianhydride (PTCDA) and 1.5 eV for naphtalene-tetracarboxylic-dianhydride (NTCDA). We will also present a superstructure model for the NTCDA/Au(1 1 1) system, deduced from low energy electron diffraction images (LEED) in combination with substrate band-backfolding. 相似文献
Getting their feet wet : Low‐cost hydrocarbon surfactants act as fluid modifiers for supercritical carbon dioxide (scCO2). Increased terminal branching of the surfactant chains aids micelle formation (see middle picture: CO2 green), and more chains allows water to be incorporated (right, blue).
A new procedure is described for surface grafting polymer brushes by step-growth polymerization from initiator-embedded polymeric thin films and micron- and nanometer-scale patterns. An imprint lithographic process, nanocontact molding, was used to prepare thin patterned cross-linked polyacrylate network films on silicon wafers that incorporated 4-bromostyrene in the networks. These networks present reactive 4-bromophenyl functionality at the surface that act as attachment sites for the subsequent Ni(0)- mediated step-growth condensation polymerization of 2,7-dibromo-9,9-dihexylfluorene The step-growth polymerization medium consisted of 2,7-dibromo-9,9-dihexylfluorene, Ni(0)-catalyst, and bipyridine in a toluene/dimethylformamide solvent mixture. The resulting growth of polydihexylfluorene brushes from the patterned surface was monitored by contact angle, optical spectrometry, surface profilometry and AFM. Brush growth was conducted from patterned features ranging from 100 microm to 100 nm in width and 50 nm in height. The optical and fluorescence behavior of the polyfluorene brushes was similar to that of thin polyfluorene films made by spin coating. 相似文献
Phosphonium ions are shown to undergo a gas-phase Meerwein reaction in which epoxides (or thioepoxides) undergo three-to-five-membered ring expansion to yield dioxaphospholanium (or oxathiophospholanium) ion products. When the association reaction is followed by collision-induced dissociation (CID), the oxirane (or thiirane) is eliminated, making this ion molecule reaction/CID sequence a good method of net oxygen-by-sulfur replacement in the phosphonium ions. This replacement results in a characteristic mass shift of 16 units and provides evidence for the cyclic nature of the gas-phase Meerwein product ions, while improving selectivity for phosphonium ion detection. This reaction sequence also constitutes a gas-phase route to convert phosphonium ions into their sulfur analogs. Phosphonium and related ions are important targets since they are commonly and readily formed in mass spectrometric analysis upon dissociative electron ionization of organophosphorous esters. The Meerwein reaction should provide a new and very useful method of recognizing compounds that yield these ions, which includes a number of chemical warfare agents. The Meerwein reaction proceeds by phosphonium ion addition to the sulfur or oxygen center, followed by intramolecular nucleophilic attack with ring expansion to yield the 1,3,2-dioxaphospholanium or 1,3,2-oxathiophospholanium ion. Product ion structures were investigated by CID tandem mass spectrometry (MS(2)) experiments and corroborated by DFT/HF calculations. 相似文献
As labor costs become more expensive, less labor-intensive disposable devices have become more ubiquitous. Similarly, the disposable optical pH sensor developed in our lab could provide a convenient yet cost-effective way for pH sensing in processes that require stringent pH control. This optical pH sensor is prepared in uniform individual lots of 100–200 sensors per lot. Calibration is accomplished on a few randomly selected sensors out of each lot. We show that all others in the same lot can then be used directly without requiring individual calibration. In this paper, a calibration model is derived to include all the factors that affect the signal of the disposable sensor. Experimental results show that the derived calibration model fits the experimental data. The readings of 28 randomly selected disposable sensors with 4 sensors from each of the 7 lots show an error less than 0.1 pH units in the useful sensing range of the sensor. The calibration model indicates that if further improvement on precision is desired, more uniform porous material and more advanced coating techniques will be required. When it comes to the effects of the varying coasters, house-made low-cost fluorometers, the variability in the brightness ratio of the blue-to-violet LEDs is the primary reason for the lack of precision. Other factors like LED light intensity distribution, optical properties of the filters and electronics also contribute to the coaster-to-coaster difference, but to a lesser extent. Two different methods for correcting the instrument variations were introduced. After correction, the collective reading errors for all the tested instruments were reduced to less than 0.2 pH units within the sensor's useful sensing range. Based on this result, our lab is currently implementing further improvements in modifying the coasters to equalize the ratios of blue-to-violet LED brightness. 相似文献
The effective conjugation of ortho and ortho-alt-para-arylene ethynylenes, with appropriately positioned pyridine and pyrazine heterocycles, increases upon binding to Ag(I) and Pd(II) cations. Significant bathochromic shifts in the electronic spectra, witnessed upon introduction of these metal bridges, are consistent with enhanced electron delocalization in the unsaturated backbone. Control studies suggest that this electronic behavior is attributable exclusively (in the case of Ag(I)) or partially (in the case of Pd(II)) to conformational restrictions of the conjugated backbones. 相似文献
New applications of the NMR-MOUSE (mobile universal surface explorer) to non-destructive quality control of elastomers are reported. One example concern the thermal aging of fast clutches which was probed by measurements of 1H transverse relaxation time. Novel methodological developments show that 1H double-quantum filtered NMR signals can be generated in the inhomogeneous fields of the NMR-MOUSE for characterization of residual dipolar couplings. This technique was applied to characterize reference natural rubber samples with different crosslink density and carbon black and silica fillers. 相似文献