Biscarbene-ruthenium complexes in catalysis: novel stereoselective synthesis of (1E,3E)-1,4-disubstituted-1,3-dienes via head-to-head coupling of terminal alkynes and addition of carboxylic acids

The reaction of a variety of alkynes RCtbd1;CH with a variety of carboxylic acids R(1)CO(2)H, in the presence of 5% of RuCl(COD)C(5)Me(5), selectively leads to the dienylesters (1E,3E)-RCH(1)=CH(2)-CH(3)=C(R)(O(2)CR(1)). The reaction also applies to amino acid and dicarboxylic acid derivatives. It is shown that the first step of the reaction consists of the head-to-head alkyne coupling and of the formation of the metallacyclic biscarbene-ruthenium complex isolated for R = Ph and catalyzing the formation of dienylester. D-labeled reactions show that the alkyne protons remain at the alkyne terminal carbon atoms and carboxylic acid protonates the C(1) carbon atom. QM/MM (ONIOM) calculations, supporting a mixed Fischer-Schrock-type biscarbene complex, show that protonation occurs preferentially at the carbene carbon C(1) adjacent to Ru, in the relative cis position with respect to the Ru-Cl bond, to give a mixed C(1)alkyl-C(4)carbene complex in which the C(4) carbene is conjugated with the noncoordinated C(2)=C(3) double bond. This 16-electron intermediate has a weak stabilizing alpha agostic C-H bond. This most stable isomer appears to have a C(4) center more accessible to the nucleophilic addition which accounts for the experimentally observed product.     

Simultaneous off-shell excitation of He 23 S by an electron and one or more photons

We report data on the excitation of the 2³ S metastable state in helium by electrons in the presence of an intense laser field. The metastable signal is detected when the electron energy is insufficient to excite this state by itself. The additional energy comes from a pulsed CO₂ laser developing peak intensities in the interaction region in the 10⁸ W× cm^?2 range and requires the absorption of one or more photons. This process involves the active participation of all three bodies: the electron, the photon and the target atom. These data represent the first observation of this process when more than one photon is required.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Effect of conformational changes on a one-electron reduction process: evidence of a one-electron P-P bond formation in a bis(phosphinine)

EPR spectra show that one-electron reduction of bis(3-phenyl-6,6-(trimethylsilyl)phosphinine-2-yl)dimethylsilane (1) on an alkali mirror leads to a radical anion that is localized on a single phosphinine ring, whereas the radical anion formed from the same reaction in the presence of cryptand or from an electron transfer with sodium naphthalenide is delocalized on the two phosphinine rings. Density functional theory (DFT) calculations show that in the last species the unpaired electron is mainly confined in a loose P-P bond (3.479 A), which results from the overlap of two phosphorus p orbitals. In contrast, as attested by X-ray spectroscopy, the P-P distance in neutral 1 is large (5.8 A). As shown by crystal structure analysis, addition of a second electron leads to the formation of a classical P-P single bond (P-P 2.389 A). Spectral modifications induced by the presence of cryptand or by a change in the reaction temperature are consistent with the formation of a tight ion pair that stabilizes the radical structure localized on a single phosphinine ring. It is suggested that the structure of this pair hinders internal rotation around the C-Si bonds and prevents 1 from adopting a conformation that shortens the intramolecular P-P distance. The ability of the phosphinine radical anion to reversibly form weak P-P bonds with neutral phosphinines in the absence of steric hindrance is confirmed by EPR spectra obtained for 2,6-bis(trimethylsilyl)-3-phenylphosphinine (2). Moreover, as shown by NMR spectroscopy, in this system, which contains only one phosphinine ring, further reduction leads to an intermolecular reaction with the formation of a classical P-P bond.     

Novel Gel—like Process for Synthesizing Submicron LiaNi0.8Co0.2O2 Powders Used in Lithium Ion Batteries

A novel gel-like process has been developed for synthesizing LiaNi0.8Co0.2O2 powders,using citric acid as a chelating agent. This process improves the homogeneity of constituent cation and enhances their reactivity in the obtained precursor. The results of electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. Its initial capacity reached 181.6 mAh/g and reversible efficiency at the first cycle is about 88.6%.     

Perfluoro compounds as blood substitutes.

Inconceivable as it is, it has been proved that animals can survive after having had their blood massively or even totally replaced by emulsions of perfluorinated compounds in salines. “Bloodles” rats charged with an emulsion of perfluorotri-n-butylamine survived a five hour period in an atmosphere containing 50% oxygen and 50% carbon monoxide, i.e. in conditions where the transport of oxygen by the red cells is entirely blocked. This review discusses: (1) the experiments which have demonstrated the capability of blood substitutes based on perfluorinated compounds to sustain life; (2) the characteristics and preparation of the relevant perfluoro compounds and the production and handling of their emulsions; (3) their “physiology”, i.e. toxicity, life-span in the blood-stream, effect on the organs and their functions, and excretion properties. Obstacles remaining to be overcome in order to provide a safe blood substitute for medical practice include the availability of numerous series of well-defined pure and inert perfluorinated chemicals, the production of stable emulsions, the optimization of fluid balance, and the attainment of reasonable excretion rates. The accent is placed upon the role of the chemist in the progress of this research.     

Synthesis and Characterization of Novel Polyimides Based on Pyridine-containing Diamine

A new aromatic diamine monomer containing pyridine unit, 2,6-bis （4-aminophenoxy- 4＇-benzoyl）pyridine（BABP）, was synthesized in three steps, starting from 2,6-pyridinedicarboxyl chloride. A series of novel pyridine-containing polyimides were prepared v/a the polycondensation of BABP with various aromatic dianhydrides through poly（amic acid） precursors, and thermal or chemical imidization of the precursors. The polyimides exhibit desirable properties, e.g., good solubility in N-methyl-2-pyrrolidone and m-cresol, excellent thermal stability and film-forming capability, as well as high inherent viscosity, indicating high molecular weight.     

Controllable growth of chains and grids from polyoxomolybdate building blocks linked by silver(I) dimers

Molecular growth processes utilizing a beta-octamolybdate synthon and {Ag2} dimers are described and the directing influence of "encapsulating" cations and coordinating solvent is also demonstrated. The growth of two 1D chains, (nBu4N)2n[Ag2Mo8O26]n (1) and (nBu4N)2n[Ag2Mo8O26(CH3CN)2]n (2), is achieved when nBu4N+ ions are used, and the diameter of the chains can be expanded by the coordination of CH3CN solvent (2). The formation of a type of gridlike structure in which 1D chains are crossed-over each other in alternatively packed layers is achieved in DMSO as the solvent; DMSO acts as a linking group to give (nBu4N)2n[Ag2Mo8O26(dmso)2]n (3), which, similar to 1 and 2, still incorporates the Bu4N+ ions that exert an "encapsulating" influence. However, in (HDMF)n[Ag3(Mo8O26)(dmf)4]n (4) the relatively bulky Bu4N+ ions are exchanged for protonated DMF cations, thereby allowing the chains to condense to a 2D array. The building block concept is further enforced by the isolation of a "monomeric" unit (Ph4P)2[Ag2Mo8O26(dmso)4] (5), which is isolated when the Ph4P+ ions are so "encapsulating" as to prevent aggregation of the {Ag-Mo8-Ag} building blocks. The nature of the AgAg dimers in each of the compounds 1-4 is examined by DFT calculations and the interplay between these Ag-Ag interactions and the structure types is described.     

Two‐Dimensional Holo‐ and Hemidirected Lead(II) Coordination Polymers: Synthetic,Spectroscopic, Thermal,and Structural Studies of [Pb(μ‐SCN)2(μ‐ebp)1.5]n and {[Pb(μ‐OAc)(μ‐ebp)](ClO4)}n (ebp=4,4′‐[(1E)‐Ethane‐1,2‐diyl]bis[pyridine]; OAc=Acetato)

Two new coordination polymers of Pb^II complexes with bridging 4,4′‐[(1E)‐ethane‐1,2‐diyl]bis[pyridine] (ebp), thiocyanato, and acetato ligands, [Pb(μ‐SCN)₂(μ‐ebp)_1.5]_n ( 1 ) and {[Pb(μ‐OAc)(μ‐ebp)](ClO₄)}_n ( 2 ), were synthesized and characterized by elemental analysis, FT‐IR, ¹H‐ and ¹³C‐NMR, thermal analysis, and single‐crystal X‐ray diffraction. In 1 , the Pb²⁺ ions are doubly bridged by both the ebp and the SCN⁻ ligands into a two‐dimensional polymeric network. The seven‐coordinate geometry around the Pb²⁺ ion in 1 is a distorted monocapped trigonal prism, in which the Pb²⁺ ions have a less‐common holodirected geometry. In 2 , the Pb²⁺ ions are bridged by AcO⁻ ligands forming linear chains, which are also further bridged by the neutral ebp ligands into a two‐dimensional polymeric framework. The Pb²⁺ ions have a five‐coordinate geometry with two N‐atoms from two ebp ligands and three O‐atoms of AcO⁻. Although ClO acts as a counter‐ion, it also makes weak interactions with the Pb²⁺ center. The arrangement of the ligands in 2 exhibits hemidirected geometry, and the coordination gap around the Pb²⁺ ion is possibly occupied by a configurationally active lone pair of electrons.