Mechanism for resonant O electron stimulated desorption from condensed O2. Non-adiabatic transitions and dynamics

Absolute kinetic energy distributions and yields associated with ground state ³P and excited state ¹D oxygen atoms have been obtained for O⁻ anion electron stimulated desorption from condensed O₂ in the electron energy range 6–15 eV. The observed yields are understood as resulting essentially from dissociative electron attachment reactions via the two lowest ²Σ⁺_g O⁻₂ resonance states through adiabatic and non-adiabatic transitions to the limits O⁻(²P) + O(³P) and O⁻(²P) + O(¹D). The kinetic energy distributions show the prominent role of electron multiple collision processes and post-dissociation interactions of the O⁻ anions in the condensed phase.     

Comparative study of electrochemically directed assembly versus conventional self-assembly of thioacetyl-terminated oligo(phenylene ethynylene)s on gold and platinum surfaces

The assembly of thioacetyl-terminated oligo(phenylene ethynylene)s (OPEs) on Au and Pt surfaces under an electric potential (electrochemical assembly, EA) was compared to assembly at an open circuit (conventional self-assembly, CSA). Cyclic voltammetry and ellipsometry were used to characterize the adsorption kinetics of self-assembled monolayers formed by these two techniques. The adsorption rate of the EA was remarkably faster at positive potentials but slower at negative potentials than that of the CSA, The EA at 400 mV proceeded about 800 times faster than the CSA when exposed to the same solution concentrations. The adsorption rates of both EA and CSA were found to be dependent on the molecular structures of OPEs. OPEs containing electron-donating groups assemble faster than those with electron-withdrawing groups. The amount of time that the thioacetyl-terminated OPE is in the presence of the base, for removal of the acetyl group to generate the thiolate, is called the deprotection time. Deprotection times play a critical role in achieving the maximum difference in adsorption rates between the EA and the CSA. The assembly must be initiated no later than 5 min after the basic deprotection is commenced so that the thiolate concentration remains low. The difference in the adsorption rates between EA and CSA might enable selective deposition of certain OPEs onto specific electrodes.     

Resonance Rayleigh scattering determination of trace amounts of Al in natural waters and biological samples based on the formation of an Al(III)-morin-surfactant complex

A novel method for the determination of trace amounts of Al(III) based on resonance Rayleigh scattering (RRS) has been developed. In the presence of some surfactants, Al(III) can react with morin and form an Al(III)-morin-surfactant complex, which results in the enhancement of RRS intensity and the appearance of the corresponding RRS spectral characteristics. Their maximum scatter peaks are at 476 nm for the cetyltrimethylammonium bromide (CTAB) system, 489 nm for the cetylpyridinium chloride (CPC) system, 474 nm for the Triton X-100 system, and 473 nm for the Tween-20 system. The enhanced RRS intensity is directly proportional to the concentration of Al(III). The detection limits are in the range of (0.50-1.2)×10⁻⁷ mol l⁻¹ depending on the surfactant. The characteristics of RRS spectra of the complexes, the optimum conditions of these reactions and the influencing factors have been investigated. The method has high selectivity, and was successfully applied to the determination of Al(III) in natural and biological samples. Furthermore, according to different complexation capacity of Al(III)-morin-CTAB system under two pH conditions, speciation analysis of Al(III) in natural waters was explored. The labile monomeric Al fraction (mainly inorganic Al, Al_i) is determined at acidic pH and the total monomeric Al fraction (Al_a) is determined at alkaline pH. The results are in agreement with those obtained by Driscoll’s 8-hydroxyquinoline extraction-ion exchange method.     

A Novel Synthesis of Two-dimensional Nanopatterned TiO2 Thin Film

Recently the research on structures with an ordered two-dimensional(2D) pattern has attracted great attention due to its versatile applications in the fields of microelectronic and optoelectronic devices, displays, biochips and sensors, enzymatic immobilization, drug carriers, and photonic band gap materials. Various well-arrayed 2D structures have been made by the modern technique such as laser writing pattern fabrication, photoetching technique, micro-electromechanical systems based on scann…     

东太平洋深海锰结核的化学元素研究

用ICP-AES法测定了东太平洋深海锰结核样品中二十多种主，次及微量元素，结果表明，表面瘤状和表面光滑两种类型锰结核的化学元素含量有较明显的区别，如表面光滑的锰结核TiO2含较高，而表面瘤状的锰结核Mn/Fe之值较高等。     

Diamond and diamond-like carbon from a preceramic polymer

The synthesis of poly(hydridocarbyne), one of a class of carbon-based random network polymers and a structural isomer of polyacetlyene, is reported. The network backbone of this polymer is primarily composed of tetrahedrally hybridized carbon atoms, each bearing one hydride substituent and linked via three carbon-carbon single bonds into a three-dimensional random network of fused rings. This atomic-level carbon network backbone confers unusual properties on the polymer, including facile thermal decomposition to form diamond or diamond-like carbon high-quality films at atmospheric pressure, by direct deposition or by chemical vapor deposition (CVD), without the use of hydrogen or any other reagent.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Redox Polymerization of Methyl Methacrylate in the Fluorous Triphasic System

Fluorous-phase chemistry is currently a topic of considerable interest1-6. Since fluoroustriphasic reactions were first described by the Curran and co-workers7, this triphasicsystem has been widely used for detagging7,8 and phase-vanishing reactions9-11. …     

Surface-enhanced Raman spectra study of metal complexes of N-D-glucosamine beta-naphthaldehyde and glycine and their interaction with DNA

Copper(II), zinc(II), cobalt(II) and cobalt(III) complexes of N-D-glucosamine beta-naphthaldehyde (C17H19O6N, NG) and glycine were synthesized. The four novel metal complexes, Cu(II)C19H28O11N2(CuGNG), Zn(II)C19H24O9N2 (ZnGNG), Co(II)C19H28O11N2(Co(II)GNG) and Co(III)C21H29O12N2(Co(III)GNG) were characterized by means of infrared (IR), electronic absorption spectroscopy and NMR etc. The surface-enhanced Raman spectra of the four complexes and their interaction with DNA were studied. By comparison of the surface-enhanced Raman spectra (SERS), the information of the four complexes' SER active sites and adsorption orientation were obtained. Combined with fluorescence spectra of Ethidium bromide (EthBr) DNA system, we concluded that none of the four complexes intercalate into DNA and that the presence of the glycine ligand lowered the anticancer activity of NG series complexes.     

A density functional theory study of the gas-phase elimination reactions of 4-arylideneimino-1,2,4-triazol-3(2H )-ones and their 3(2H )-thione analogues

Theoretical studies on the thermolysis in the gas phase of 4-arylideneimino-1,2,4-triazol-3(2H)-ones and 4-arylideneimino-1,2,4-triazol-3(2H)-thiones were carried out using density functional theory methods, at the B3LYP/6-31G(d) and B3LYP/6-311+G(2d,p) levels of theory. The proposed reaction mechanism occurs in one step, leading to the formation of 3-hydroxy-(2H)-1,2,4-triazole or 3-mercapto-(2H)-1,2,4-triazole and a 4-substituted benzonitrile, via a six-membered cyclic transition state. The progress of the reactions was followed by means of the Wiberg bond indices. The results indicate that the transition states have character intermediate between reactants and products, and the calculated synchronicities show that the reactions are slightly asynchronous, in the case of triazolones, and show a higher asynchronicity in the case of triazolthiones. The bond-breaking processes are slightly more advanced than the bond-forming ones, indicating a small bond deficiency in the transition states. Kinetic and activation parameters for the reactions studied have been calculated and compared with available experimental data.From the Proceedings of the 28th Congreso deQuímicos Teóricos de Expresión Latina (QUITEL 2002)