Frustrated Lewis Pair Chemistry Enables N2 Borylation by Formal 1,3-Addition of a B−H Bond in the Coordination Sphere of Tungsten

The first example of a formal 1,3-B−H bond addition across the M−N≡N unit of an end-on dinitrogen complex has been achieved. The use of Piers’ borane HB(C₆F₅)₂ was essential to observe this reactivity and it plays a triple role in this transformation: 1) electrophilic N₂-borylation agent, 2) Lewis acid in a frustrated Lewis pair-type B−H bond activation, and 3) hydride shuttle to the metal center. This chemistry is supported by NMR spectroscopy and solid-state characterization of products and intermediates. The combination of chelate effect and strong σ donation in the diphosphine ligand 1,2-bis(diethylphosphino)ethane was mandatory to avoid phosphine dissociation that otherwise led to complexes where borylation of N₂ occurred without hydride transfer.     

Comparative Study of Alkali-Cation-Based (Li+, Na+, K+) Electrolytes in Acetonitrile and Alkylcarbonates

The development of a suitable functional electrolyte is urgently required for fast-charging and high-voltage alkali-ion (Li, Na, K) batteries as well as next-generation hybrids supercapacitors. Many recent works focused on an optimal selection of electrolytes for alkali-ion based systems and their electrochemical performance but the understanding of the fundamental aspect that explains their different behaviour is rare. Herein, we report a comparative study of transport properties for LiPF₆, NaPF₆, KPF₆ in acetonitrile (AN) and a binary mixture of ethylene carbonate (EC), dimethyl carbonate (DMC): (EC/DMC : 1/1, weigh) through conductivities, densities and viscosities measurements in wide temperature domain. By application of the Stokes-Einstein, Nernst-Einstein, and Jones Dole equations, the effective ionic solvated radius of cation (r_eff), the ionic dissociation coefficient (α_D) and structuring Jones Dole's parameters (A, B) for salt are calculated and discussed according to solvent or cation nature as a function of temperature. From the results, we demonstrate that better mobility of potassium can be explained by the nature of the ion-ion and ion-solvent interactions due to its polarizability. In the same time, the predominance of triple ions in the case of K⁺, is a disadvantage at high concentration.     

Reactivity of B‐Xanthyl N‐Heterocyclic Carbene‐Boranes

The synthesis and reactivity of mono‐ and bis‐S‐xanthyl NHC‐boranes is reported. The new NHC‐boranes are prepared through nucleophilic exchange at boron from either mono‐ or bis‐triflyl NHC‐boranes, themselves obtained by protolysis of the NHC‐BH₃ starting compounds. The B?H bond of the S‐xanthyl NHC‐boranes can be cleaved both homolytically and heterolytically, albeit the latter is more synthetically useful. The S‐xanthyl NHC‐boranes can reduce both aldehydes and imines. The B?S bond can also be cleaved homolytically. Under UV irradiation, the S‐xanthyl NHC‐boranes generate NHC‐boryl radicals that can initiate radical polymerizations of acrylates.     

Small dissymmetry,yet large effects on the transport propertiesof electrolytes based on imide salts: Consequences on performancein Li-ion batteries

To gain better insight into the influence of the anion size and symmetry on the transport properties and thermal stability of an electrolyte based on lithium(fluorosulfonyl)(trifluoromethanesulfonyl)-imide(FTFSI)salt,we performed the physical and electrochemical characterization of an electrolyte based on FTFSI incorporated in standard binary(3 EC/7 EMC)and ternary(EC/PC/3 DMC)alkylcarbonate mixtures.By applying the Jones-Dole-Kaminsky(JDK),Eyring and Arrhenius empirical models to the electrolyte viscosity we show that the activation enthalpy and entropy energy barriers(ΔH≠,ΔS≠)for viscous flow are between 12 and 15 kJ·mol^-1.They are strongly dependent on the solvent nature and are significantly lower than their symmetric anions LiFSI and LiTFSI(19-20 kJ·mol^-1)in the binary mixture.Furthermore,the hydrodynamic radius,rs,calculated by JDK,and the ionicity behavior illustrated by the Walden role,showed that the FTFSI anion is outside the solvation sphere(rs>0.6 nm)which is smaller in the case of an EC/EMC solvent base.In the 3 EC/7 EMC solvent mixture,LiFTFSI is less conductive than in the ternary mixture i.e.,σ_max=8.9 mS cm^-1 at C_max=1.1 mol L^-1 for 3 EC/7 EMC and,σ_max=10.5 mS cm^-1 at max=0.7 mol L^-1 for EC/PC/3 DMC,due to a strong solvation and a greater association of FTFSI ions in the binary solvent mixture.The thermal stability of FTFSI based electrolytes was determined by the shift of the evaporation temperature of the volatile solvents(DMC,EMC)in the presence of salt,towards the higher temperatures.This feature is visible on the thermograms obtained by DSC both with the liquid electrolyte and with charged LMO cathodes in presence of electrolytes.The consequences of these properties on the electrochemical behavior of a graphite(Gr)half-cell,a lithium metal(Li)anode and a manganese lithium oxide(LMO)cathode demonstrated on the one hand the formation of a thick solid electrolyte interphase(SEI)on graphite that consumed a significant amount of lithium i.e.,18%of total capacity of the first charge.Furthermore,LiFTFSI delivered 95%of the initial capacity C=360 mAh g^-1 at C/10 with EC/PC/3 DMC versus 91%when it was combined with 3 EC/7 EMC C=348 mAh g^-1,while the capacities obtained for LiTFSI in EC/PC/3 DMC were the lowest(C=275 mAh g^-1)compared to those of the other salts.After 10 cycles,the capacity loss at C/20 is<2%for LiFSI and LiFTFSI with the two solvent mixtures.On the other hand,manganese dissolution from LMO as well as current collector corrosion were confirmed by post-mortem examination of opened coin cells.The incompatibility of the LMO cathode with an electrolyte based on FTFSI was confirmed by the position of the decomposition peak of charged LMO in contact with this electrolyte observed by DSC These results demonstrate that the nature of the anion as well as the composition of the solvent considerably influence the performance of imide-based lithium salts both on the anode,but especially on the high voltage cathode.     

CuLn complexes with a single μ-oximato bridge

Two original dinuclear (LnYb, 3 and LnEr, 4) and one trinuclear Cu^IILn^IIICu^II (LnGd, 5) complexes derived from a polydentate non symmetrical Schiff base ligand H₂L have been prepared. The ligand possesses two functions (phenol and oxime) able to coordinate the Ln ions, but structural studies (X-ray diffraction and powder X-ray diffraction) show that the Cu^II and Ln^III ions are only bridged by the oximato (NO) pair. The missing phenoxo bridge is replaced by a surprising pseudo-bridge involving one oxygen atom of the nitrato anion linked to the Cu and Ln ions according to a η²: η¹: μ mode. Although this latter contact has no role from the magnetic point of view, it introduces a large deformation of the unique bridging network. The CuYb complex 3 and the trinuclear CuGdCu complex 5 present antiferromagnetic interactions, with a J_CuGd interaction equal to ?1.25 cm^?1 in 5. The genuine single bridge can be considered as responsible for the antiferromagnetic character of the interaction.     

Capillary HPLC–ICP MS mapping of selenocompounds in spots obtained from the 2-D gel electrophoresis of the water-soluble protein fraction of selenized yeast

A method based on ICP collision-cell MS detection in capillary HPLC was developed to gain an insight into the purity and identity of selenium-containing proteins separated by 1-D and 2-D electrophoresis. The bands and spots obtained after the separation of water-soluble proteins in selenized yeast were digested with trypsin prior to chromatography. Selenium could be detected down to the subpicogram level. The method, assisted by information obtained by MALDI TOF MS on the 5000 Da cut-off fraction, permitted the purity of bands and spots to be estimated and the efficiency of tryptic digestion and the quantity of selenium present in individual peptides to be evaluated. Owing to the high sensitivity and the lack of matrix suppression effects, the method provided chromatograms with signal-to-noise ratios of 10–1000 in conditions where the common ES Q–TOF MS detection failed.      

CO2 Hydroboration: Impact of the Boryl Moieties on the Reactivity of Four Bis(boryl)acetal Compounds toward 2,6-Diisopropylaniline

The hydroboration of CO₂ into bis(boryl)acetal (BBA) compounds is an important transformation, since it enabled to selectively reduce CO₂ by 4e^- and to subsequently use the BBA compounds as C₁ and C_n sources. However, the influence of the nature of the boryl moieties on the reactivity of BBA compounds has not been evaluated so far. In the present study, four BBA compounds – including two new ones – were reacted with 2,6-diisopropylaniline to afford the expected imine. Significant differences in the rate of the reaction from minutes to weeks have been observed depending on the BBA used, showing the importance of the nature of the boryl moieties. Theoretical investigations enabled to propose a mechanism involving the addition of the aniline to the BBA as the rate-determining step and to determine that the steric hindrance of the BBA compounds is the main factor driving the rate of this condensation reaction.     

Structural and luminescent properties of micro- and nanosized particles of lanthanide terephthalate coordination polymers

Reaction in water between rare earth ions (Ln = Y, La-Tm, except Pm) and the sodium salt of terephthalic acid leads to a family of lanthanide-based coordination polymers of general formula [Ln2(C8H4O4)3(H2O)4] n with Ln = La-Tm or Y. The isostructurality of the compounds with the previously reported Tb-containing polymer is ascertained on the basis of their X-ray powder diffraction diagrams. The coordination water molecules can be reversibly removed without destroying the crystal structure for compounds involving one of the lighter lanthanide ions (La-Eu). For compounds involving one of the heavier lanthanide ions (Tb-Tm) or yttrium, a structural change occurs during the drying process. X-ray diffraction data show this new anhydrous phase corresponding to the linking of pairs of Er(III) ions through mu-carboxylate bridges. Porosity profiles calculated for the anhydrous phases of Tb(III) and Er(III) show the presence of channels with very small sections. The luminescent properties of all the compounds have been recorded and the two most luminescent polymers, namely, the europium- and the terbium-containing ones, have been studied in more detail. Tb(III)-containing compounds display large quantum yields, up to 43%. Polyvinylpyrrolidone nanoparticles doped with [Ln2(C8H4O4)3(H2O)4] n (Ln = Eu, Tb, Er) have also been synthesized and characterized. The encapsulation of the coordination polymers results in somewhat reduced luminescence intensities and lifetime, but the nanoparticles can be dispersed in water and remain unchanged in this medium for more than 20 h.     

A systematic study of carboxylic acids in negative ion mode electrospray ionisation mass spectrometry providing a structural model for ion suppression

We report a systematic investigation of the effects and structural requirements for ion suppression in negative ion mode electrospray ionisation mass spectrometry of a series of carboxylic acids and present a structural model rationalising ion suppression effects.