Nanocomposite Carbon‐PDMS Material for Chip‐Based Electrochemical Detection

This paper presents an alternative approach to create low‐cost and patternable carbon electrodes suitable for microfluidic devices. The fabrication and the electrochemical performances of electrodes made of Polydimethylsiloxane doped with commercially available carbon black (C‐PDMS) are described. Conductivity and electrochemical measurements performed on various carbon to PDMS ratios showed that electrodes with suitable electrochemical properties were obtained with a ratio of 25 %.     

Tandem Mass Spectrometric Analysis of a Mixture of Isobars Using the Survival Yield Technique

Collision induced dissociation tandem mass spectrometry experiments were performed to unequivocally separate compounds from an isobaric mixture of two products. The Survival Yield curve was obtained and is shown to consist in a linear combination of the curves corresponding to the two components separately. For such a mixture, a plateau appears on the diagram in lieu of the continuous decrease expected allowing for the structural study of the two components separately. The width of the plateau critically relates to the fragmentation parameters of the two molecular ions, which need to be sufficiently different structurally for the plateau to be observed. However, at constant fragmentation parameters, we have observed the width significantly increases at large m/z. This makes the separation more and more efficient as isobars have larger m/z and the technique complementary to those applicable at low m/z only. We have observed that the vertical position of the plateau relates linearly to the relative concentration of the two compounds that may be useful for quantification. Repeatability was estimated at 2% on a quadrupole ion trap. An advantage of using survival yield curves only, is that a priori knowledge of the respective fragmentation patterns of the two isobars becomes unnecessary. Consequently, similar performances are obtained if fragments are isobaric, which is also demonstrated in our study. The critical case of reverse peptides, at low m/z and similar fragmentation parameters, is also presented as a limitation of the method.     

Lanthanide-mediated supramolecular cages and host-guest interactions

The structure and thermodynamic properties of lanthanide complexes with a new tripodal ligand L2 have been elucidated using different physicochemical methods. At stoichiometric ratios, the tetrahedral three-dimensional complexes with lanthanide cations are formed in acetonitrile with good stabilities. Despite minor structural changes comparing to previously investigated tripodal ligands, the resulting assembly exhibits different features revealed with the crystal structure of [Eu(4)L2(4)](OH)(ClO(4))(11) (orthorhombic, Pbcn). Interestingly, the highly charged edifice contains an inner cage encapsulating a perchlorate anion. Such lanthanide mediated cage-like assemblies are rare, and may be of interest for different sensing applications. Indeed, the anionic guest can be exchanged with different anions. The related host-guest equilibria were investigated with NMR techniques. Various aspects of these reactions are qualitatively discussed.     

The synthesis and spectroscopic characterisation of hydrotalcite formed from aluminate solutions

Raman spectroscopy has been used to characterise nine hydrotalcites prepared from aluminate and magnesium solutions (magnesium chloride and seawater). The aluminate hydrotalcites are proposed to have the following formula Mg(6)Al(2)(OH)(16)(CO(3)(2-))·xH(2)O, Mg(6)Al(2)(OH)(16)(CO(3)(2-),SO(4)(2-))·xH(2)O, and Mg(6)Al(2)(OH)(16)(SO(4)(2-))·xH(2)O. The synthesis of these hydrotalcites using seawater results in the intercalation of sulfate anions into the hydrotalcite interlayer. The spectra have been used to assess the molecular assembly of the cations and anions in the hydrotalcite structures. The spectra have been conveniently subdivided into spectral features based upon the carbonate anion, the hydroxyl units and water units. This investigation has shown the ideal conditions to form hydrotalcite from aluminate solutions is at pH 14 using a magnesium chloride solution at a volumetric ratio of 1:1. Changes in synthesis conditions resulted in the formation of impurity products aragonite, thenardite, and gypsum.     

Tunable gold nanoparticles shape and size in reductive and structuring media containing protic ionic liquids

Herein, a facile method was developed for preparing high concentration of monodispersed gold nanoparticles (NPs) at room temperature from gold(III) chloride by using different media based on N,N-dimethylformamide or water solutions containing a protic ionic liquid (PIL), namely, the octylammonium formate or the bis(2-ethyl-hexyl)ammonium formate, based on which both PILs were used as redox-active structuring media. The formation of gold NPs in these systems was then characterized using UV–visible spectroscopy, transmission electron microscopy, and dynamic light scattering. From these investigations, it appears that the structure and aggregation pathway of PILs in selected solvents affect strongly the formation, growth, the shape, and the size of gold NPs. In fact, by using this approach, the shape-/ size-controlled gold NPs (branched and spherical) can be generated under mild condition. This approach suggests also a wealth of potential for these designer nanomaterials within the biomedical, materials, and catalysis communities by using designer and safer media based on PILs.     

KVTeO5 and a redetermination of the Na homologue

A single crystal of KVTeO₅, potassium vanadium tellurite, has been grown. The present structure determination has been conducted together with the refinement of the NaVTeO₅ homologue, sodium vanadium tellurite, for the sake of precise comparison. The network consists of [VTeO₅]_n ribbons built up by VO₄ tetrahedra linking centrosymmetric Te₂O₆ groups and stacked along the [010] direction; the alkali cations are intercalated in between. The Te^IV atom exhibits a typical one‐sided coordination number (CN) of 4, completed by a lone pair, which forms a distorted triangular bipyramid with the four O atoms.     

A Non Homogeneous Riemann Solver for shallow water and two phase flows

In this work we consider a two steps finite volume scheme, recently developed to solve nonhomogeneous systems. The first step of the scheme depends on a diffusion control parameter which we modulate, using the limiters theory. Results on Shallow water equations and two phase flows are presented.     

Sulfur dioxide mediated one-pot, four-component synthesis of polyfunctional sulfones and sulfonamides, including medium-ring cyclic derivatives

In previous papers (Synthesis2002, 232 and J. Org. Chem.2004, 69, 6413), we have shown that the hetero-Diels-Alder addition of sulfur dioxide to 1-oxy or 1,3-dioxy-1,3-dienes generates zwitterions that add to enoxysilanes or allylsilanes giving silyl sulfinates that can be converted in the same pot into polyfunctional sulfones, sulfonamides or sulfonic esters. We are presenting further applications of this method, including the synthesis of new medium-size heterocyclic systems of the type tetrahydro-2H-thiocines and hexahydro-1,2-thiazonine.     

Boron dipyrromethene dyes: a rational avenue for sensing and light emitting devices

Boron dipyrromethene dyes bearing nitro, amino, isocyanate and isothiocyanate functions were readily prepared under mild conditions. Various combinations allow to produce urea, diurea, thiourea, dithiourea in the 3, 4 and 5-substitution positions of the appended phenyl group. Condensation of the 3,4-substituted diamino derivative with 1,10-phenanthroline-5,6-dione and 6-formyl-2-methylpyridine allow to prepare dipyridophenazine and indole derivatives. The 3,5-dinitro-substituted indacene dye was characterized by an X-ray molecular structure showing a pronounced tilt angle of the dinitrophenyl group relative to the indacene core (approximately 84 degrees) whereas one nitro groups is basically coplanar with the phenyl ring and the second titled by approximately 21 degrees. The optical properties of these dyes reveals on/off switching of the fluorescence from the nitro to the amino compounds and further to the urea likely understood in the framework of an photoinduced electron transfer process.