Influence of the steel powder type and processing parameters on the debinding of PM compacts with gelatin binder

Binders present an important part of the powder metallurgy technology as they are vital to provide efficient powder agglomeration and/or lubrication during shaping. At the same time, they have to be easily removed from the compacts during initial stages of sintering without any harmful effect for the base material, as well as for the environment. Therefore, behavior of gelatin as a binder for stainless- and tool-steel gas-atomised powder compacts was studied by thermal analysis and electron microscopy. Thermal analysis showed that peak mass-loss occurred in the range between 340 and 370 °C, depending on the base powder and heating rate. Risk for base powder oxidation at temperatures below 425 °C was detected. Based on the obtained results, it is recommended to perform debinding at ~425 °C after applying a heating rate of around 7.5 °C min^?1. Only in this way efficient enough binder removal can be obtained concurrently to avoiding base powder oxidation.     

Regiospecific Formation and Unusual Optical Properties of 2,5‐Bis(arylethynyl)rhodacyclopentadienes: A New Class of Luminescent Organometallics

A series of 2,5‐bis(arylethynyl)rhodacyclopentadienes has been prepared by a rare example of regiospecific reductive coupling of 1,4‐(p‐R‐phenyl)‐1,3‐butadiynes (R?H, Me, OMe, SMe, NMe₂, CF₃, CO₂Me, CN, NO₂, ?C?C‐(p‐C₆H₄?NHex₂), ?C?C?(p‐C₆H₄?CO₂Oct)) at [RhX(PMe₃)₄] ( 1 ) (X=?C?C?SiMe₃ ( a ), ?C?C‐(p‐C₆H₄?NMe₂) ( b ), ?C?C?C?C?(p‐C₆H₄?NPh₂) ( c ) or ?C?C?{p‐C₆H₄‐C?C?(p‐C₆H₄‐N(C₆H₁₃)₂)} ( d ) or Me ( e )), giving the 2,5‐bis(arylethynyl) isomer exclusively. The rhodacyclopentadienes bearing a methyl ligand in the equatorial plane (compound 1 e ) have been converted into their chloro analogues by reaction with HCl etherate. The rhodacycles thus obtained are stable to air and moisture in the solid state and the acceptor‐substituted compounds are even stable to air and moisture in solution. The photophysical properties of the rhodacyclopentadienes are highly unusual in that they exhibit, exclusively, fluorescence between 500–800 nm from the S₁ state, with quantum yields of Φ=0.01–0.18 and short lifetimes (τ=0.45–8.20 ns). The triplet state formation (Φ_ISC=0.57 for 2 a ) is exceptionally slow, occurring on the nanosecond timescale. This is unexpected, because the Rh atom should normally facilitate intersystem crossing within femto‐ to picoseconds, leading to phosphorescence from the T₁ state. This work therefore highlights that in some transition‐metal complexes, the heavy atom can play a more subtle role in controlling the photophysical behavior than is commonly appreciated.     

Topochemical acetylation of cellulose nanopaper structures for biocomposites: mechanisms for reduced water vapour sorption

Moisture sorption decreases dimensional stability and mechanical properties of polymer matrix biocomposites based on plant fibers. Cellulose nanofiber reinforcement may offer advantages in this respect. Here, wood-based nanofibrillated cellulose (NFC) and bacterial cellulose (BC) nanopaper structures, with different specific surface area (SSA), ranging from 0.03 to 173.3 m²/g, were topochemically acetylated and characterized by ATR-FTIR, XRD, solid-state CP/MAS ¹³C-NMR and moisture sorption studies. Polymer matrix nanocomposites based on NFC were also prepared as demonstrators. The surface degree of substitution (surface-DS) of the acetylated cellulose nanofibers is a key parameter, which increased with increasing SSA. Successful topochemical acetylation was confirmed and significantly reduced the moisture sorption in nanopaper structures, especially at RH = 53 %. BC nanopaper sorbed less moisture than the NFC counterpart, and mechanisms are discussed. Topochemical NFC nanopaper acetylation can be used to prepare moisture-stable nanocellulose biocomposites.     

Novel aspects of nanocellulose

Novel nanoscaled cellulose particles were prepared using high-pressure homogenization of aqueous media contenting treated cellulose samples in a Microfluidizer^® processor (MF). Here, we present the generation of spherical cellulose nanoparticles as an extension of previously published reports of nano fibrillated cellulose. Although MF treatment of unmodified cellulose yields nanofibrils which are reported in several publications, in the current work different kinds of pretreatments were proven to be necessary to obtain spherical structured cellulose nanoparticles. One such treatment may be the decrystallization of cellulose regenerating it from N-methylmorpholine-N-oxid-monohydrate (NMMNO*H₂O). Nanocellulose was then obtained by a subsequent high-pressure mechanical treatment of the precipitate in aqueous dispersion. Decrystallization was also realized by grinding cellulose in a planetary ball mill. The resulting amorphous intermediates were characterized by Raman spectroscopy. Another approach tested was hydrolysis and subsequent mechanical treatment using an Ultra-Turrax^® and MF. Another alternative was given by the mechanical treatment of aqueous dispersions of low substituted cellulose derivatives such as carboxymethyl cellulose and oxidized cellulose without any further hydrolysis.     

New insights into the mechanisms behind the strengthening of lignocellulosic fibrous networks with polyamines

Polyelectrolytes have been used extensively in the papermaking industry for various purposes. Although recent studies have shown that polyamines can be efficient dry-strength additives, the mechanism governing the strength enhancement of paper materials following the adsorption of polyamines onto pulp fibres is still not well understood. In this study, the effect of the adsorption of polyallylamine hydrochloride (PAH) onto the surface of unbleached kraft pulp fibres was investigated on both the fibre and the network scale. Isolated fibre crosses were mechanically tested to evaluate the impact of the chemical additive on the interfibre joint strength on the microscopic scale and the effect was compared with that previously observed on the paper sheet scale. X-ray microtomography was used to understand structural changes in the fibrous network following the adsorption of a polyamine such as PAH. Using image analysis methods, it was possible to determine the number of interfibre contacts (or joints) per unit length of fibre as well as the average interfibre joint contact area. The results showed that the median interfibre joint strength increased by 18 % upon adsorption of PAH. This can be achieved both by a larger molecular contact area in the contact zones and by a stronger molecular adhesion. The addition of the polymer also increased the number of efficient interfibre contacts per sheet volume. This combination of effects is the reason why polyamines such as PAH can increase the dry tensile strength of paper materials.     

Hollow Spheres of Iron Carbide Nanoparticles Encased in Graphitic Layers as Oxygen Reduction Catalysts

Nonprecious metal catalysts for the oxygen reduction reaction are the ultimate materials and the foremost subject for low‐temperature fuel cells. A novel type of catalysts prepared by high‐pressure pyrolysis is reported. The catalyst is featured by hollow spherical morphologies consisting of uniform iron carbide (Fe₃C) nanoparticles encased by graphitic layers, with little surface nitrogen or metallic functionalities. In acidic media the outer graphitic layers stabilize the carbide nanoparticles without depriving them of their catalytic activity towards the oxygen reduction reaction (ORR). As a result the catalyst is highly active and stable in both acid and alkaline electrolytes. The synthetic approach, the carbide‐based catalyst, the structure of the catalysts, and the proposed mechanism open new avenues for the development of ORR catalysts.     

Stereoselective Oxidative Bioconjugation of Amino Acids and Oligopeptides to Aldehydes

The first stereoselective, near-equimolar, and metal-free oxidative bioconjugation of amino acids and oligopeptides to aldehydes is presented. Based on a newly developed organocatalytic oxidative concept, the C-terminal and side-chain carboxylic acid functionalities of amino acids and oligopeptides are shown to couple in a stereoselective manner to α-branched aldehydes catalyzed by a chiral primary amine and a quinone as oxidizing agent. The oxidative coupling generally proceeds in high yield. For aspartic acid, selective coupling of the side-chain, or the C-terminal carboxylic acid, is demonstrated depending on the protection strategy. The stereoselective, oxidative bioconjugation concept is extended to a series of oligopeptides where coupling to carboxylic acid functionalities is presented. Bioorthogonal linker molecules for further functionalization are obtained by merging the oxidative coupling strategy with the click concept. It is demonstrated that the configuration of the new stereocenter is determined exclusively by the organocatalyst.     

C–F Bond Cleavage Reactions with Beryllium,Magnesium, Gallium,Hafnium, and Thorium Halides

The work describes unexpected stoichiometric C–F bond cleavage reactions of beryllium, magnesium, gallium, hafnium and thorium halides with α,α,α-trifluorotoluene. The reaction of BeBr₂ / GaBr₃ or MgBr₂ / GaBr₃ mixtures as well as neat GaI₃ with α,α,α-trifluorotoluene in the presence of (OSi₂Me₄)₂ ( I ) yields the carbenium ion containing compounds [Ph-C(O₂Si₂Me₄)][GaX₄] (X = Br: 1 , X = I/F: 2 ). Both compounds were successfully characterized and a defluorination type reaction under incorporation of a siloxy unit was observed. Compound 1 was also characterized by single-crystal X-ray diffraction analysis. The conversion of α,α,α-trifluorotoluene with BeI₂, HfI₄ or ThI₄ turned out to be a halodefluorination-type reaction with formation of α,α,α-triiodotoluene ( 3 ). An adequate NMR spectroscopic and the X-ray crystallographic characterization of 3 were performed for the first time.     

Impact of the Spatial Organization of Bifunctional Metal–Zeolite Catalysts on the Hydroisomerization of Light Alkanes

Improving product selectivity by controlling the spatial organization of functional sites at the nanoscale is a critical challenge in bifunctional catalysis. We present a series of composite bifunctional catalysts consisting of one-dimensional zeolites (ZSM-22 and mordenite) and a γ-alumina binder, with platinum particles controllably deposited either on the alumina binder or inside the zeolite crystals. The hydroisomerization of n-heptane demonstrates that the catalysts with platinum particles on the binder, which separates platinum and acid sites at the nanoscale, leads to a higher yield of desired isomers than catalysts with platinum particles inside the zeolite crystals. Platinum particles within the zeolite crystals impose pronounced diffusion limitations on reaction intermediates, which leads to secondary cracking reactions, especially for catalysts with narrow micropores or large zeolite crystals. These findings extend the understanding of the “intimacy criterion” for the rational design of bifunctional catalysts for the conversion of low-molecular-weight reactants.     

Enhancing Tris(pyrazolyl)borate-Based Models of Cysteine/Cysteamine Dioxygenases through Steric Effects: Increased Reactivities,Full Product Characterization and Hints to Initial Superoxide Formation

The design of biomimetic model complexes for the cysteine dioxygenase (CDO) and cysteamine dioxygenase (ADO) is reported, where the 3-His coordination of the iron ion is simulated by three pyrazole donors of a trispyrazolyl borate ligand (Tp) and protected cysteine and cysteamine represent substrate ligands. It is found that the replacement of phenyl groups—attached at the 3-positions of the pyrazole units in a previous model—by mesityl residues has massive consequences, as the latter arrange to a more spacious reaction pocket. Thus, the reaction with O₂ proceeds much faster and afterwards the first structural characterization of an iron(II) η²-O,O-sulfinate product became possible. If one of the three Tp-mesityl groups is placed in the 5-position, an even larger reaction pocket results, which leads to yet faster rates and accumulation of a reaction intermediate at low temperatures, as shown by UV/Vis and Mössbauer spectroscopy. After comparison with the results of investigations on the cobalt analogues this intermediate is tentatively assigned to an iron(III) superoxide species.