Capillary electrophoresis-based analysis of phospholipid and glycosaminoglycan binding by human beta2-glycoprotein I

Human beta2-glycoprotein I (beta2gpI) is a phospholipid and heparin binding plasma glycoprotein involved in autoimmune diseases characterized by blood clotting disturbances (thrombosis) together with the occurrence of autoantibodies against beta2gpI. With the final goal of assessing autoantibody influence on binding interactions of beta2gpI we have studied the development of capillary electrophoresis (CE)-based assays for interactions of negatively charged ligands with beta2gpI. In the development of suitable conditions for analysis at neutral pH of this basic protein (pI about 8) we found the pH hysteresis behavior of fused silica surfaces useful since the protonated surface after an acid pre-wash counteracted protein adsorption efficiently in contrast to more laborious procedures including acrylamide/dimethylacrylamide coatings that did not permit analysis of this particular protein. This simple approach made estimates of heparin-beta2gpI interactions possible and the principle was shown also to work for detection of betagpI binding to anionic phospholipids. Utilizing the pH hysteresis effect may be a simple solution to the adsorption problems often encountered in analyses of proteins by CE.     

Control of lysine reactivity in four-helix bundle proteins by site-selective pKa depression: expanding the versatility of proteins by postsynthetic functionalization

Five 42-residue polypeptides have been designed to fold into hairpin helix-loop-helix motifs that dimerize to form four-helix bundles, and to serve as protein scaffolds for the elucidation at the molecular level of the principles that control and fine-tune lysine and ornithine reactivities in a protein context. Site-selective control of Lys and Orn reactivity provides a mechanism for addressing directly individual residues and is a prerequisite for the site-selective functionalization of folded proteins. Several lysine and one ornithine residues were introduced on the surface and in the hydrophobic core of the folded motif. The reactivity of each residue was determined by measuring the degree of acylation of the trypsin cleaved fragments by HPLC and mass spectrometry. The most reactive residues were Orn34 and Lys19, both of which were located in d positions in the heptad repeat, and therefore in hydrophobic environments. Upon reaction of the helix-loop-helix dimer KA-I with one equivalent of mono-p-nitrophenyl fumarate, Orn34 was acylated approximately three times more efficiently than Lys19, whereas Lys10 (b position), Lys15 (g position), and Lys33 (c position) remained unmodified. In the sequence KA-I-A(15) Lys15 was replaced by an alanine residue and the selectivity of Orn34 over Lys19 increased to approximately a factor of six, probably because Lys15 had the capacity to reduce the pK(a) value of Lys19 and 85 % of site-selectively monoacylated product was obtained. The pH dependence of the acylation reaction was determined and showed that the pK(a) of the reactive residues were 9.3, more than a pK(a) unit below the magnitude of the corresponding residue in a solvent exposed position. Introducing Lys and Orn residues into a or d positions of the heptad repeat therefore serves as a mechanism of depressing their pK(a) to increase their reactivity site selectively. Extensive NMR and CD spectroscopic analyses showed that the sequences fold according to prediction.     

Dynamic alterations of fibronectin layers on copolymer substrates with graded physicochemical characteristics

Desorption and exchange of preadsorbed fibronectin layers in pure buffer solution and solutions of human serum albumin or fibronectin, respectively, were studied in dependence on the physicochemical characteristics of maleic acid copolymer films used as substrates. Although the preadsorbed amount of fibronectin differed only slightly, the protein was found to exhibit a significantly enhanced anchorage at the more hydrophobic polymer surface as compared to the more hydrophilic and more negatively charged polymer surface. The preadsorbed fibronectin layer was most efficiently exchanged by fibronectin (i.e., in the homodisplacement process) while pure buffer solution and human serum albumin solutions induced desorption or exchange of fibronectin to lower and similar degrees. An increase of the total adsorbed amount of protein due to additional adsorption of fibronectin or human serum albumin accompanied the partial exchange of the preadsorbed fibronectin in the displacement experiments. Evaluation of the kinetics of desorption and exchange of fibronectin at any of the substrates revealed two kinds of surface-attached protein populations--a fast desorbing species and a species with a slow desorption and exchange rate. By a multivariate regression analysis the surface characteristics of the polymer substrate were confirmed to determine the degree of protein desorption and exchange while the dynamics of the layer alteration was found to solely depend on the diffusion behavior of the proteins.     

Determination of Fibre Pore Structure: Influence of Salt,pH and Conventional Wet Strength Resins

It has been shown, in the present investigation, that the two methods used to investigate the pore size distribution of unbleached chemical pulps, i.e. inverse size exclusion chromatography (ISEC) and nuclear magnetic resonance (NMR), give different average pore radius for the pores inside the fibre wall. This is due to the way in which these experiments are performed and the sensitivity of the methods to different types of pores in the cell wall. It was also shown that the two methods gave different results when changing the pH and the ionic strength of the pulp suspension. The pore radius, as detected with ISEC, decreased with both increasing ionic strength and decreasing pH, indicating a loose structure of the exterior of the fibrillar network. However, the pore radius as detected with NMR, was virtually unaffected when increasing the ionic strength, indicating a very rigid structure of the interior of the fibre wall. Decreasing pH though, lead to a decrease in pore radius indicating that upon protonation of the carboxylic groups in the fibre wall, the electrostatic repulsion is diminished and the average pore radius decreases. The NMR technique was also used to study wet strength aid penetration into the fibre wall. It was shown that wet strength aids with a small molecular weight, penetrated the fibre wall, as detected by a decrease in pore radius. It was also shown that addition of different wet strength aids increased the tensile index of the sheet and decreased the fibre strength, measured as zero span-strength of the sheets.     

Preparation and redox properties of N,N,N-1,3,5-trialkylated flavin derivatives and their activity as redox catalysts

Eight different flavin derivatives have been synthesized and the electronic effects of substituents in various positions on the flavin redox chemistry were investigated. The redox potentials of the flavins, determined by cyclic voltammetry, correlated with their efficiency as catalysts in the H2O2 oxidation of methyl p-tolyl sulfide. Introduction of electron-withdrawing groups increased the stability of the reduced catalyst precursor.     

Deoxygenation of supporting electrolytes in stripping voltammetry by glocuse and co-immobilized glocuse oxidase and catalase in a flow system

Carrier solutions for stripping voltammetry in flow systems are deoxygenated by reaction with glucose added to the carrier. The reaction was catalyzed by glocuse oxidase and catalase co-immobilized in an enzyme reactor which was inserted before the injector. The oxygenated was removed at least as efficiently as with nitrogen purging and the voltametric behaviour of cadmium(II), lead(II) and zinc(II) was unaffected by the glucose/gluconic acid system. A particular advantage is the rapid start-up compared to the lengthy purging of carrier solution when nitrogen degassing is used. The enzyme reactor made from porous glass was effective for several months.     

Cationic polymerization of p-substituted α-methylstyrenes. III. Effect of polymerization conditions on tacticity and molecular weight for p-chloro-α-methylstyrene

The cationic polymerization of p-chloro-α-methylstyrene was investigated for the effect of initiator and solvent on polymer tacticity, molecular weight, and molecular weight distribution. The products were generally crystalline polymers of 80–90% syndiotactic content with fairly high molecular weights and broad molecular weight distributions. Tacticities and molecular weight distributions followed similar patterns suggesting that the effect of reaction conditions on ionpair end-group structures was the dominant factor.     

Copper and Silver Atoms in the β-Cage of a Zeolite: Model Calculations

The electronic structures of the 4-4 SBU, the β-cage, and the β-cage with two 4-4 SBU's attached to it have been studied by means of EH-MO calculations. No indication of the formation of a band structure has been found. The HOMO region consists of many closely spaced, localized states, 98.6% of them concentrated on the O-atoms. Reversible color changes of Cu⁺¹ and Ag⁺¹ zeolites observed upon hydration-dehydration experiments can be understood as charge-transfer transitions from the HOMO concentrated on the zeolite O-atoms to the metal cations. As soon as the Cu⁺¹ or Ag⁺¹ are partially hydrated, the ns* and np* states are shifted to higher energies. The luminescence observed with dehydrated Cu⁺¹-zeolites X is caused by a 4p*←HOMO absorption, followed by spontaneous 4s*←4p* emission. After a detailed study of a Cu⁺¹ in the 6-6 SBU, we discuss the electronic structure of a β-cage filled with 1,2,4,8, and 9 Cu⁺¹. In each case, the β-cage is found to be too small to allow the formation of a band structure. The levels caused by the added copper are distinctly quantized. Calculations on [Ag₃(H₂O)₃]³⁺ in a β-cage are reported. The direct interaction between the Ag-atoms is significant. As a consequence, the states formed by Ag 5s and 5p atomic orbitals are delocalized over the three Ag-centers. In both the Cu⁺¹ and the Ag⁺¹ zeolites, the ligand-field picture is found to be insufficient to explain the electronic structure, when the metal is coordinated to the zeolite oxygen framework.     

Deviation from Ohm's law in electric field assisted capillary liquid chromatography

Earlier studies of electric field assisted LC (EF-LC) have shown that the effect on charged analytes of the application of an electric field over a capillary LC column is relatively small. Charged analytes can only be affected by the electric field while present in the mobile phase, which makes the effective time for influence of the electric field t(0) independent of retention time. Because the charged analytes only can be affected for a short time the electric field strength ought to be high in order to increase the impact of the electric field on the separation. We have, however, found that only a relatively low electric field strength can be used in EF-LC when pressure is used as main driving force. The useful field strength was limited by a dramatic increase in the current. This increase in current was found to origin from an increased concentration of buffer ions that have an electrophoretic mobility towards the pumped flow.     

Derivatives and reactions of glutaconaldehyde—XIII: Regiospecific ring opening of 3-substituted pyridines

A number of nucleophilic ring openings of 3-substituted pyridinium salts have been reinvestigated and summarized. The structure of the resulting stable glutaconaldehyde derivatives was investigated in detail by ¹H NMR. It has been concluded that in general nucleophilic pyridinium ring openings are highly regiospecific. In each case investigated to date a single product was isolated, as a result of attack by the nucleophile at only one of the pyridine α-positions. With the OH ion as the only nucleophile, attack occurs at the pyridine C-2, while larger nucleophiles such as amines and carbanions attack at the pyridine C-6. This was found to be the case for a variety of 3-substituted pyridines such as 3-methyl, 3-methoxy-, 3-cyano-, 3 chloro-pyridine.