New Applications of Polyfunctional Organometallic Compounds in Organic Synthesis Frequently used abbreviations are defined at the end of the article

In the second half of the twentieth century much effort was invested in the preparation of highly reactive polar organometallic reagents. The high reactivity of these reagents precluded the presence of many functional groups and often good chemoselectivities and stereoselectivities could only by achieved by transmetalation reactions. The synthesis of increasingly complex target molecules and the desire to avoid tedious protection-deprotection steps has led inevitably to the use of functionalized organometallic reagents in retrosynthesis. In the last fifteen years, the generation of organic derivatives of numerous metals and metalloids (Li, Mg, B, Zn, Sn) was investigated. In this review the most important preparations and applications of organometallic reagents in organic synthesis will be covered, with particular emphasis on organozinc reagents.     

Protolytic surface reactions of a fluorapatite-maghemite mixture in aqueous suspension

Synthetically prepared maghemite and fluorapatite, characterized with BET, SEM, XRD, FT-IR, and FT-Raman, are used to investigate the protolytic properties and surface characteristics in a mixed system of maghemite and fluorapatite by means of potentiometric titrations and surface complex modeling. Titrations were performed in the pH range of 7.3-10.5 at 25 +/- 0.2 degrees C in ionic media of 0.10 mol dm(-3) NaNO3 with 0.0100 mol dm(-3) HNO3 and 0.0100 mol dm(-3) NaOH used as titrants. The constant capacitance model (CCM) was applied to interpret the titration data. Two models with different surface equilibria were tested. In the first model, the mixed system was treated as a one-component system with a total surface area of 40.04 +/- 5.2 m2 g(-1) without any consideration to the subsystems. The surface equilibria, triple bond XOH + H+ <==> triple bond XOH2+, beta(s)(-11)(int) = 6.74 +/- 0.07; XOH <==> triple bond XO- + H+, beta(s)(-11)(int) = -7.75 +/- 0.07, were found to represent an accurate model for the system, and the specific capacitance was optimized to 2.0 F m(-2). The number of active surface sites N(s) was found to be 1.2 sites nm(-2). This model has, however, no relation to the subsystems of maghemite and fluorapatite. The second model is related to the subsystems and displays the surface equilibria, triple bond S2OH<==> triple bond S2O- + H+, beta(s)(-101)(int) = -9.12 +/- 0.01; triple bond FeOH + H+<==> triple bond FeOH2+, lg beta(s)(-11)(int) = 6.80 +/- 0.01; triple bond FeOH<==>FeO- + H+, beta(s)(-11)(int) = -7.77 +/- 0.01, where S2OH is related to fluorapatite and FeOH is representing maghemite. Fluorapatite corresponds to the dominating active surface in the system. The specific capacitance was optimized to 18 F m(-2). The N(s) values were found to be 2.27 sites nm(-2) for fluorapatite and 0.80 sites nm(-2) for maghemite. The N(s) values together with evidence from the FT-Raman and SEM investigations reveal that interactions between maghemite and fluorapatite surfaces occur during the titration. The acid-base properties and surface characteristics of the subsystems maghemite-H+ and fluorapatite-OH- using the CCM have been published earlier.     

Square-planar coordinated polyanions of palladium, platinum, and gold stannaborate [SnB11H11]2- coordination chemistry

The tetrasubstituted polyanions of platinum, palladium, and gold [M(SnB(11)H(11))(4)](x-) (x=6, M=Pd, Pt; x=5, M=Au) have been prepared and characterized by single-crystal X-ray diffraction, elemental analysis, IR, Raman, (11)B, and (119)Sn heteronuclear NMR spectroscopy. In the case of the platinum derivative [Bu(3)MeN](6)[Pt(SnB(11)H(11))(4)] (2) (119)Sn M?ssbauer spectroscopy has been carried out. The isolated salts are stable towards moisture and air and the complexes 2 and 3 were treated with 1,3-bis(diphenylphosphino)propane (dppp) to give the respective substitution products [Bu(3)MeN](2)[(dppp)M(SnB(11)H(11))(2)] (M=Pd, Pt).     

Modification of HPTLC-plates by in situ chemical bonding with non-polar and polar organosilanes

A method has been developed for the preparation of modified silica plates for high performance thin-layer chromatography (HPTLC). Some typical organosilanes were thus allowed to react in situ with the silica of Merck HPTLC-plates. This method was found to be highly reproducible, simple and cheap. Non-polar plates were prepared and compared with commercial plates from Merck, Whatman and Macherey-Nagel. Modification with cyanodecyltrichlorosilane resulted in plates that showed good coverage, efficiency and low residual silica activity. Silica modified with a multifunctional silane has different properties in different organic solvents. It will appear to be non-polar in a polar solvent and vice versa. New advantageous separation systems are thus made feasible by the presence of cyano groups on the plate. The utility of modified thin-layer plates is demonstrated by the separation of some homologues of p-hydroxybenzoic acid esters and of some polycyclic aromatic hydrocarbons.     

Carbon fibre electrodes in flow potentiometric stripping analysis

The construction of carbon fibre flow electrodes suitable for use in connection with potentiometric and constant-current stripping is described, and the fibre electrodes are compared with a glassy carbon disc thin layer cell. The signal-to-background ratio is approximately 1.6 times higher for an 8–10 μm carbon fibre compared to the glassy carbon disc electrode. If an Ag/AgCl tube is used as both counter and reference electrode, the signal-to-noise ratio of the fibre electrode is approximately five times better than for a glassy carbon disc electrode with a calomel reference; the latter electrode design, however, gives slightly better precision. The dead volume and internal potential drop of the fibre electrodes are more than one order of magnitude smaller than for the glassy carbon disc electrode. Because of the simplicity of the manufacturing process and low material cost, the fibre cells can be used as disposable electrodes and the polishing process necessary in connection with glassy carbon disc electrodes can be omitted.     

Non-use and misinterpretation of CRMs. Can the situation be improved?

A survey of 82 scientific papers on trace elements in foods found the use of Certified Reference Materials to be less than anticipated. Less than 50% of the papers reported use of CRMs. When used, the evaluation is usually very crude and provides the user with very little information about his analytical performance. This is mainly due to lack of information/communication between the producers of CRMs, the users and those writing guidelines for the use of CRMs. Several specific problems are pointed out and remedies to improve the situation are described.     

Flow constant-current stripping analysis for antimony(III) and antimony(V) with gold fibre working electrodes : Application to Natural Waters

Antimony(III) is determined by means of electrolysis at ?0.40 V vs. Ag/AgCl on a gold-coated gold fibre electrode for 0.5–10 min in a redox buffer containing 0.01 M iron(II) in 0.10 M hydrochloric acid, and subsequent stripping with a constant current of 0.50μA either in 2 M hydrochloric acid or in 4 M hydrochloric acid/4 M calcium chloride. Antimony(V) is determined by the same procedure in 4 M hydrochloric acid medium. Bismuth(III) is masked by the addition of iodide to the sample prior to electrolysis. Antimony(III) and antimony(V) are determined by standard addition methods; the whole procedure including digital and graphical evaluation of the results is fully automated. The antimony(V) concentrations in the river water reference sample SLRS-1 and the seawater reference sample NASS-1 were found to be 0.63 and 0.31 μg l^?1 with standard deviations of 0.046 and 0.051 μg l^?1, respectively (n=15). The certified value for SLRS- 1 is 0.63±0.05 μg l^?1; no certified value is available for NASS-1.     

Utility of 4,6-dichloro-2-(methylthio)-5-nitropyrimidine. Part 2: Solution phase synthesis of tetrasubstituted purines

A simple synthesis of tetrasubstituted purines is disclosed based on the solution phase elaboration of 4,6-dichloro-2-methylthio-5-nitropyrimidine. One-pot sequential C4 and C6 chloride substitution by secondary and primary amines yields 4,6-diamino-2-methylthio-5-nitropyrimidines. mCPBA-mediated oxidation of the methylthio moiety to the corresponding sulfone allows facile substitution at the 2-position. CrCl₂ assisted reduction of the nitro group, followed by acid catalyzed orthoester cyclization, then provides novel tetrasubstituted purines not accessible by other methods.     

Decoupling the effects of hydrophilic and hydrophobic moieties at the neuron–nanofibre interface

Peptide-based nanofibres are a versatile class of tunable materials with applications in optoelectronics, sensing and tissue engineering. However, the understanding of the nanofibre surface at the molecular level is limited. Here, a series of homologous dilysine–diphenylalnine tetrapeptides were synthesised and shown to self-assemble into water-soluble nanofibres. Despite the peptide nanofibres displaying similar morphologies, as evaluated through atomic force microscopy and neutron scattering, significant differences were observed in their ability to support sensitive primary neurons. Contact angle and labelling experiments revealed that differential presentation of lysine moieties at the fibre surface did not affect neuronal viability; however the mobility of phenylalanine residues at the nanofibre surface, elucidated through solid- and gel-state NMR studies and confirmed through tethered bilayer lipid membrane experiments, was found to be the determining factor in governing the suitability of a given peptide as a scaffold for primary neurons. This work offers new insights into characterising and controlling the nanofibre surface at the molecular level.

The mobility of hydrophobic moieties at a peptide nanofibre surface determines its suitability as a scaffold for sensitive primary cells.