Synthesen und Kristallstrukturen von Dialkylgalliumhydriden — dimere versus trimere Formeleinheiten

Syntheses and Crystal Structures of Dialkylgallium Hydrides — Dimeric versus Trimeric Formula Units Dialkylgallium hydrides (R = Me, Et, iPr, iBu, neopentyl) were obtained on two different synthetic routes. The dimethyl and diethyl compounds were formed by the reaction of LiH with the corresponding dialkylgallium chlorides via lithium dialkyldihydridogallate intermediates, which so far have not been isolated in a pure form. On the second route, trialkylgallium compounds were treated with [GaH₃·NMe₂Et] to yield the dialkylgallium hydrides by a substituent exchange reaction. The dimethyl, diethyl and diisopropyl compounds are trimeric in solution. That trimeric structure was verified for the diisopropyl derivative by a crystal structure determination. Di(neopentyl)gallium hydride has a dimeric structure in solution and in the solid state.     

The s-p bonded representatives of the prominent BaAl4 structure type: a case study on structural stability of polar intermetallic network structures

This work presents a detailed, combined experimental and theoretical study on the structural stability of s-p bonded compounds with the BaAl4 structure type (space group I4/mmm, Z = 2) as part of a broad program to investigate the complex questions of structure formation and atomic arrangements in polar intermetallics. From ab initio calculations employing pseudopotentials and a plane wave basis set, we extracted optimized structural parameters, binding energies, and the electronic structure of the systems AeX(III)4, AeX(II)2X(IV)2, AeX(II)2X(III)2 (Ae = Ca, Sr, Ba; X(II) = Mg, Zn; X(III) = Al, Ga; X(IV) = Si, Ge). For all systems we found a pronounced pseudo-gap in the density of states separating network X42- bonding from antibonding electronic states that coincides with the Fermi level for an electron count of 14 electrons per formula unit, the optimum value for stable BaAl4-type polar intermetallics. However, the synthesis and structural characterization (from X-ray single crystal and powder diffraction data) of the new compounds AeZn2-Al2+, AeZn2-deltaGa2+delta (Ae = Ca, Sr, Ba; delta = 0-0.2) and AeMg0.9Al3.1, AeMg1.7Ga2.3 (Ae = Sr, Ba) manifested that electron deficiency is rather frequent for BaAl4-type polar intermetallics. The site preference for different "X" elements in the ternary systems was quantified by calculating "coloring energies", which, for some systems, was strongly dependent on the size of the electropositive Ae component. The Ae2+ cations decisively influence the nearest neighbor distances in the encapsulating polyanionic networks X4(2-) and the structures of these networks are surprisingly flexible to the size of the Ae component without changing the overall bonding picture. A monoclinically distorted variant of the BaAl4 structure occurs when the cations become too small for matching the size of encapsulating X4(2-) cages. An even larger size mismatch leads to the formation of the EuIn4 structure type.     

Red blood cell ghosts and intact red blood cells as complementary models in photodynamic cell research

Recent research on erythrocytes as model cells for photodynamic therapy showed differing behaviour of certain photosensitisers in erythrocytes compared to other cells. Differences of dye accumulation in the cell membrane were proposed to be the reason for the distinct photodynamic effects. Using pheophorbide a as an example, the combination of erythrocyte ghosts as models to follow the dye accumulation in the cell membrane and intact erythrocytes as model cells to show the photodynamic damage is provided. Evidence for the correctness of the combination of erythrocyte ghosts and intact erythrocytes as a functioning model system in photodynamic cell research is provided using the confocal laser scanning microscopy on intact, pheophorbide a loaded erythrocytes.     

The roles of template complexation and ligand binding conditions on recognition in bupivacaine molecularly imprinted polymers

A model for the molecular basis for ligand recognition in bupivacaine imprinted methacrylic acid-ethylene glycol dimethacrylate co-polymers has been developed based upon a series of (1)H-NMR studies in conjunction with HPLC and radioligand binding analyses. (1)H-NMR studies indicated that functional monomer-template complexes survive the polymerisation process, at least up until the stage of gelation. Polymers were synthesised and characterised by surface area analysis (BET), FT-IR and SEM. A combination of zonal and frontal chromatographic studies in aqueous and non-polar media indicate that selectivity arises from a combination of hydrophobic and electrostatic interactions. However, in the concentration regime employed for LC-based studies, ligand recognition in aqueous media was shown to be predominantly non-specific and hydrophobic in character. Radioligand binding studies, in lower ligand binding concentration regimes, permitted closer examination of the higher affinity binding sites. It was shown that the presence of a polar modifier in a non-polar solvent, or an organic modifier in water, produced enhanced selectivity. Variable temperature studies showed that the temperature of binding influences selectivity as well as the apparent number of sites available and that this effect is different in organic and aqueous environments. This indicates that the system studied is more complex in character than is generally appreciated. A comparison of the techniques employed here indicates that although chromatographic studies provide a valuable first-round screen for polymer-ligand selectivities, the level of detail obtainable using radioligand binding studies (lower concentrations and true equilibrium binding) makes them superior for detailed evaluations of molecularly imprinted polymers.     

Fullerenols revisited as stable radical anions

The first exhaustive purification and characterization of the much-studied "fullerenols", prepared by reaction of C(60) in toluene with an oxygenated, aqueous NaOH solution using tetrabutylammonium hydroxide as a phase transfer catalyst, has been performed. The resulting fullerenol is not simply polyhydroxylated C(60) but rather is a structurally and electronically complex C(60) radical anion with a molecular formula of Na(+)(n)[C(60)O(x)(OH)(y)](n)(-) (where n = 2-3, x = 7-9, and y = 12-15) for three different, but identical, preparations. Surprisingly, Na(+)-fullerenol is paramagnetic, exhibiting mu(B) values in aqueous solution of 1.9-2.1 B.M. at 0.5 T and 300 K and R(1) proton relaxivities of 0.55-0.77 mM(-1)s(-1) at 20 MHz and 40 degrees C, values both slightly higher than those expected for a pure S = 1/2 spin system. ESR studies (ESE-FS and 2D nutation) of frozen aqueous solutions at 1.5 and 5.0 K establish that Na(+)-fullerenol is mainly S = 1/2 with a minor, but significant, component of S = 1. Thus, this is the first report to characterize these widely studied, water-soluble fullerenols as stable radical anions. The stability of the S = 1/2 Na(+)-fullerenol radical is likely due to a highly derivatized C(60) surface that protects a cyclopentadienyl radical center on the fullerene.     

Proper use of certified reference materials?

Certified reference materials (CRMs) are important quality assurance tools in the laboratory. It is, however, not certain they are always used properly. Several guidelines are available on the use of CRMs, but appear to be mostly unknown. The users thus get very little help on the way to proper use. Many of the problems with CRMs are well known, but that does not mean they have disappeared. Better use of CRMs will require the involvement of producers and analytical societies, e.g. the AOAC. Editors of international analytical journals could have a great influence on how CRM results and other QA data are treated in publications.     

Properties of a recombinant β-glucosidase from polycentric anaerobic fungus Orpinomyces PC-2 and its application for cellulose hydrolysis

A β-glucosidase (BglA, EC 3.2.1.21) gene from the polycentric anaerobic fungus Orpinomyces PC-2 was cloned and sequenced. The enzyme containing 657 amino acid residues was homologous to certain animal, plant, and bacterial β-glucosidases but lacked significant similarity to those from aerobic fungi. Neither cellulose- nor protein-binding domains were found in BglA. When expressed in Saccharomyces cerevisiae, the enzyme was secreted in two forms with masses of about 110 kDa and also found in two forms associated with the yeast cells. K _m and V _max values of the secreted BglA were 0.762 mM and 8.20 μmol/(min·mg), respectively, with p-nitrophenyl-β-d-glucopyranoside (pNPG) as the substrate and 0.310 mM and 6.45 μmol/(min·mg), respectively, for the hydrolysis of cellobiose. Glucose competitively inhibited the hydrolysis of pNPG with a K _i of 3.6 mM. β-Glucosidase significantly enhanced the conversion of cellulosic materials into glucose by Trichoderma reesei cellulase preparations, demonstrating its potential for use in biofuel and feedstock chemical production. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may be suitable.     

Photonic crystals--a step towards integrated circuits for photonics.

The field of photonic crystals has, over the past few years, received dramatically increased attention. Photonic crystals are artificially engineered structures that exhibit a periodic variation in one, two, or three dimensions of the dielectric constant, with a period of the order of the pertinent light wavelength. Such structures in three dimensions should exhibit properties similar to solid-state electronic crystals, such as bandgaps, in other words wavelength regions where light cannot propagate in any direction. By introducing defects into the periodic arrangement, the photonic crystals exhibit properties analogous to those of solid-state crystals. The basic feature of a photonic bandgap was indeed experimentally demonstrated in the beginning of the 1990s, and sparked a large interest in, and in many ways revitalized, photonics research. There are several reasons for this attention. One is that photonic crystals, in their own right, offer a proliferation of challenging research tasks, involving a multitude of disciplines, such as electromagnetic theory, nanofabrication, semi-conductor technology, materials science, biotechnology, to name a few. Another reason is given by the somewhat more down-to-earth expectations that photonics crystals will create unique opportunities for novel devices and applications, and contribute to solving some of the issues that have plagued photonics such as large physical sizes, comparatively low functionality, and high costs. Herein, we will treat some basics of photonic crystal structures and discuss the state-of-the-art in fabrication as well give some examples of devices with unique properties, due to the use of photonic crystals. We will also point out some of the problems that still remain to be solved, and give a view on where photonic crystals currently stand.     

Preparation and redox properties of N,N,N-1,3,5-trialkylated flavin derivatives and their activity as redox catalysts

Eight different flavin derivatives have been synthesized and the electronic effects of substituents in various positions on the flavin redox chemistry were investigated. The redox potentials of the flavins, determined by cyclic voltammetry, correlated with their efficiency as catalysts in the H2O2 oxidation of methyl p-tolyl sulfide. Introduction of electron-withdrawing groups increased the stability of the reduced catalyst precursor.