One-electron reduction of superoxide radical-anions by 3-alkylpolyhydroxyflavones in micelles. Effect of antioxidant alkyl chain length on micellar structure and reactivity

In micellar solutions, one-electron reduction of (*)O 2 (-) radical-anions by 3-alkylpolyhydroxyflavones (FnH) with alkyl chains of n = 1, 4, 6, 10 carbons produces phenoxyl radicals ( (*)Fn) identical to those obtained by one-electron oxidation by (*)Br 2 (-) radical-anions or by repair of tryptophan radicals. In cetyltrimethylammonium bromide (CTAB), F1H localizes in the Stern layer, and alkyl chains of other FnH solubilize in the hydrophobic interior, interacting with cetyl tails. This interaction produces more compact micelles with lower intramicellar fluidity, as suggested by the increase in the pseudo-first-order rate constant of (*)Fn formation ( k 1) from approximately 390 s (-1) for n = 1 to 610 s (-1) for n = 10, leading to an intramicellar bimolecular rate constant of 1 x 10 (5) M (-1) s (-1). Additionally, (*)F1 and (*)F4 decay by intermicellar bimolecular reaction (2 k = 20 and 2 x 10 (5) M (-1) s (-1), respectively) whereas other (*)Fn radicals are stable over seconds due to increased localization with regards to the Stern layer. In contrast, the thick uncharged hydrophilic palisade layer and the compact hydrophobic core of Triton X100 micelles are responsible for a much higher microviscosity resulting in a decrease in k 1 from approximately 15.6 s (-1) for n = 1 to 9.6 s (-1) for n = 10.     

Pyrolysis mass spectrometry for distinguishing potential hoax materials from bioterror agents

Pyrolysis mass spectrometry (PyMS) was investigated as a rapid tool to distinguish potential bioterror hoax materials from samples containing pathogenic bacteria. A pyrolysis time-of-flight (TOF) mass spectrometer equipped with an alternative ionization technique, metastable atom bombardment (MAB), was used to produce sample spectra. These spectra were analyzed by principal component and discriminant analysis for pattern recognition. Materials investigated were two strains of Vibrio parahaemolyticus, one of which produced the tdh toxin, two Salmonella enterica serotypes, a biological mosquito control product containing spores of Bacillus thuringiensis, and several white to off-white powders (which could be used as hoax materials), such as flour, corn starch, methyl cellulose, and xanthan gum. PyMS distinguished bacterial samples from hoax materials. Furthermore, pattern analysis differentiated Vibrios from Salmonellae, Salmonella enterica Anatum from S. enterica Heidelberg, and the two V. parahaemolyticus strains from each other. The B. thuringiensis mixture was distinguished from other bacteria and powders, suggesting that PyMS with pattern recognition may differentiate samples containing pathogens, including Bacillus spp., from nonbiological agents and that it can be a rapid method for detection of bacteria. MS data acquisition took only 7 min for each sample.     

Ion-selective electrodes for basic drugs

Coated-wire ion-selective electrodes based on dinonylnaphthalene sulfonic acid (DNNS) are prepared for methadone, methylamphetamine, cocaine and protriptyline in protonated form. In each set, nearly-Nernstian responses are obtained while detection limits range from 10^-5.5M for cocaine and methylamphetamine electrodes, to 10^-6.0M for methadone, and 10^-6.5 M for protriptyline electrodes. Selectivity is found to decrease in the order methadone, protriptyline, cocaine and methylamphetamine; these results are consistent with systematic selectivity studies reported earlier for electrodes in this family.     

Polyborane reactions in ionic liquids: new efficient routes to functionalized decaborane and o-carborane clusters

In contrast to reactions that have been observed in traditional organic solvents, decaborane olefin-hydroboration and alkyne-insertion reactions have been found to proceed in ionic liquid solvents without the need of a catalyst. These reactions now provide important new, high-yield synthetic pathways to functionalized decaborane and o-carborane clusters.     

Synthesis of cyclopropyl-iron σ complexes by decarbonylation of acyl complexes

Contrary to earlier reports [1,2] cyclopropyliron σ complexes can be conveniently prepared in fair to excellent yields by photodecarbonylation of the corresponding acyl complexes.     

A method for creating a non-equilibrium NT(P1-P2) ensemble in molecular dynamics simulation

A method is proposed for creating a non-equilibrium ensemble with a constant number of molecules, constant temperature and constant pressures with different target values in two reservoirs [referred to as NT(P(1)-P(2)) ensemble] that are connected by a finite length nanopore. This method includes two steps. The first step places a partition between the two reservoirs and then creates a static pressure field and a proper system volume by using two self-adjusting plates on which two external forces/pressures with different target values are exerted. The second step removes the partition and the two self-adjusting plates and the pressure difference between the two reservoirs is maintained by a "pump" designed to simultaneously create a periodic boundary condition between the two reservoirs and supply the necessary force (work) to a subset of molecules for a steady state flow. To examine this method, several cases using liquid argon with a truncated and shift Lennard-Jones potential under different target pressures and pump sizes were studied. Results show that the method proposed in this paper works well. In addition, the method proposed in this paper was compared with the other external force field methods. The results show that as long as the external force is applied to a restricted set of molecules away from the channel a constant pressure difference between two reservoirs is maintained. The advantage of the algorithm proposed here also sets the absolute pressures with different target levels in two reservoirs instead of it being arbitrary. Studies show that the fluid flow rate or permeability through a nanopore depends not only on the pressure difference between two reservoirs, but also on the absolute pressures in two reservoirs.     

Probing the nature of three-centered hydrogen bonds in minor-groove ligand-DNA interactions: the contribution of fluorine hydrogen bonds to complex stability

Double-stranded DNA sequences have been prepared in which single atoms (the O2-carbonyls of selected thymines) have been replaced by fluorine or methyl. To maintain normal Watson-Crick hydrogen bonding with the complementary purines, these analogue derivatives have been prepared as C-nucleosides. The O2-carbonyls of interest for this study are those involved in a bifurcated (or three-centered) hydrogen bond with the minor groove binding ligand 4',6-diamidino-2-phenylindole (DAPI). TM studies of the duplexes illustrate that the DNA duplexes are destabilized when fluorine or methyl replaces one or both of the minor groove O2-carbonyls, which can in part be explained by changes in minor groove hydration. In the presence of DAPI, most of the duplexes exhibit an increased TM due to the presence of DAPI bound in the minor groove. The extent of helix overstabilization negatively correlates with the presence of one or both methyl groups in the minor groove, suggesting that ligand binding is weakened in the presence of the non-carbonyl functional groups. The presence of single fluorine appears to promote helix stabilization, and native-like stabilization occurs when both fluorines are present. KD values quantitate binding effects between DAPI and the native and analogue sequences. Sequences with one or both methyl groups exhibit very poor binding with DAPI, while those containing a single fluorine behave essentially like native carbonyl-containing sequences. With both fluorines present, KD values were observed to increase by a moderate 3-fold at 100 mM NaCl and somewhat more at 200 mM NaCl. Binding affinities with both methyl groups present were 500-1000-fold weaker than native. The results suggest that organofluorines can function as hydrogen-bond acceptors, at least in the bifurcated interaction that contributes to minor groove binding by DAPI.     

Interfacial energy exchange and reaction dynamics in collisions of gases on model organic surfaces

Molecular beam scattering experiments and molecular dynamics simulations have been combined to develop an atomic-level understanding of energy transfer, accommodation, and reactions during collisions between gases and model organic surfaces. The work highlighted in this progress report has been motivated by the scientific importance of understanding fundamental interfacial chemical reactions and the relevance of reactions on organic surfaces to many areas of environmental chemistry. The experimental investigations have been accomplished by molecular beam scattering from ω-functionalized self-assembled monolayers (SAMs) on gold. Molecular beams provide a source of reactant molecules with precisely characterized collision energy and flux; SAMs afford control over the order, structure, and chemical nature of the surface. The details of molecular motion that affect energy exchange and scattering have been elucidated through classical-trajectory simulations of the experimental data using potential energy surfaces derived from ab initio calculations. Our investigations began by employing rare-gas scattering to explore how alkanethiol chain length and packing density, terminal group relative mass, orientation, and chemical functionality influence energy transfer and accommodation at organic surfaces. Subsequent studies of small molecule scattering dynamics provided insight into the influence of internal energy, molecular orientation, and gas–surface attractive forces in interfacial energy exchange. Building on the understanding of scattering dynamics in non-reactive systems, our work has recently explored the reaction probabilities and mechanisms for O₃ and atomic fluorine in collisions with a variety of functionalized SAM surfaces. Together, this body of work has helped construct a more comprehensive understanding of reaction dynamics at organic surfaces.     

Combined prostate diffusion tensor imaging and dynamic contrast enhanced MRI at 3T — quantitative correlation with biopsy

The purpose of this work was to compare diagnostic accuracy of Diffusion Tensor Imaging (DTI), dynamic contrast-enhanced magnetic resonance imaging (DCE MRI) and their combination in diagnosing prostate cancer. Twenty-five patients with clinical suspicion of prostate cancer underwent MRI, prior to transrectal ultrasound-guided biopsies. MRI data were correlated to biopsy results. Logistic regression models were constructed for the DTI parameters, DCE MRI parameters, and their combination. The areas under the receiver operator characteristic curves (AUC) were compared between the models. The nonparametric Wilcoxon signed rank test was used for statistical analysis. The sensitivity and specificity values were respectively 81% (74–87%) and 85% (79–90%) for DTI and 63% (55–70%) and 90% (85–94%) for DCE. The combination “DTI or DCE MRI” had 100% (97–100%) sensitivity and 77% (69–83%) specificity, while “DTI and DCE MRI” had 44% (37–52%) sensitivity and 98% (94–100%) specificity. The AUC for DTI+DCE parameters was significantly higher than that for either DTI (0.96 vs. 0.92, P=.0143) or DCE MRI parameters (0.96 vs. 0.87, P=.00187) alone. In conclusion, the combination of DTI and DCE MRI has significantly better accuracy in prostate cancer diagnosis than either technique alone.