Flexible square supramolecular rings with hydrogen-bonded bushing in solid-state oxalurate complexes: versatility of the oxalurate ligand in covalent and noncovalent binding

Isotypic pseudooctahedral complexes of Co, Ni, and Cu with two chelating oxalurate ligands and two water molecules, trans-[M(oxalurate)(2)(H(2)O)(2)], have been synthesized and isolated by a novel progressive crystallization technique. Diffraction analyses reveal that the three complexes form isotypic solid-state structures in which the molecular connectivity and complex network of noncovalent interactions are qualitatively identical throughout the series. The oxalurate groups form unbounded chains through two different self-recognition patterns-a typical DA-AD motif and an unusual DDA'-A'DD form (D = hydrogen bond donor, A' = double acceptor). The unsymmetrical oxalurate group possesses the topological properties necessary to form aggregates of higher symmetry, and the "M(oxalurate)(2)" fragments form a rhombic 2-D motif with hydrogen-bonded corners and with hydrogen-bond acceptors directed to the inside of the cyclic aggregate. The 2-D net is stacked to form a channeled 3-D structure, in which the coordinated aqua ligands form the principal interlayer interactions. The slanted channels are occupied by the axial waters and by waters of crystallization, which are hydrogen bonded to the channel walls to form an ordered bushing. The extensive 3-D hydrogen-bonded superstructure is flexible enough to accommodate the distortion produced by the Jahn-Teller effect in the copper compound without requiring a qualitative structural change. The bonds affected by Jahn-Teller distortion in the Cu complex [Cu-O = 2.3788(15) A] are significantly longer than their analogues in the Co and Ni complexes [Co-O = 2.175(2), Ni-O = 2.094(9) A].     

Maleation of poly(3,4‐epoxy‐1‐butene) for accelerated crosslinking in the presence of a redox catalyst

Accelerated crosslinking of novel poly(3,4‐epoxy‐1‐butene) (3,4‐PEPB) oligomers in the presence of a cobalt‐based redox catalyst was investigated. Previous studies using model compounds, 3,4‐dimethoxy‐1‐butene and 1,4‐dimethoxy‐2‐butene, suggested that maleation of hydroxyl‐terminated 3,4‐PEPB oligomers would result in more rapid crosslinking in thin films. Novel maleated oligomers offered a unique combination of both electron‐rich and electron‐poor olefinic sites, and quantitative maleation significantly increased the crosslinking rate of 3,4‐PEPB. Efficient copolymerization between terminal maleate groups and olefinic groups in the repeating unit was proposed to account for accelerated crosslinking rates. Furthermore, the addition of novel reactive diluents, such as maleic acid mono‐ethyl ester, also effectively improved the 3,4‐PEPB crosslinking rate. Sol fraction measurements as a function of coating thickness revealed that the crosslinking rate versus oxygen diffusion was less significant for the maleated oligomers because of the presence of reactive electron‐poor olefins. Sol fractions were constant for catalyst concentrations greater than 0.25–0.50 wt % (as compared with oligomer feed). This observation suggested that a redox process was not a dominant factor in determining crosslinking rates at various experimental conditions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2789–2798, 2002     

Predicting the shape and structure of face-centered cubic gold nanocrystals smaller than 3 nm.

Although a number of computational studies have examined the relative stability of icosahedral and decahedral gold clusters from 1 to 3 nm in size, few studies have focussed on the variety of face-centered cubic (fcc) nanoparticles in this size regime. In most cases small fcc gold particles are assumed to adopt the truncated octahedral shape, but in light of the fact that the shape and structure of gold nanoparticles is known to vary, the relative stability of fcc polyhedra may change with size. Presented here are results of first-principles calculations investigating the preferred shape of gold particles less than 3 nm in size. Our results indicate that the equilibrium shape of fcc gold nanoparticles less than 1 nm is the cuboctahedron, but this shape rapidly becomes energetically unstable with respect to the truncated octahedron, octahedron and truncated cube shapes as the size increases.     

Transient streaming potential in a finite length microchannel

Pressure-driven flow of an electrolyte solution in a microchannel with charged solid surfaces induces a streaming potential across the microchannel. Such a flow also causes rejection of ions by the microchannel, leading to different concentrations in the feed and permeate reservoirs connecting the capillary, which forms the basis of membrane based separation of electrolytes. Modeling approaches traditionally employed to assess the streaming potential development and ion rejection by capillaries often present a confusing picture of the governing electrochemical transport processes. In this paper, a transient numerical simulation of electrochemical transport process leading to the development of a streaming potential across a finite length circular cylindrical microchannel connecting two infinite reservoirs is presented. The solution based on finite element analysis shows the transient development of ionic concentrations, electric fields, and the streaming potential over the length of the microchannel. The transient analysis presented here resolves several contradictions between the two types of modeling approaches employed in assessing streaming potential development and ion rejection. The simulation results show that the streaming potential across the channel is predominantly set up at the timescale of the developing convective transport, while the equilibrium ion concentrations are developed over a considerably longer duration.     

Open-access liquid chromatography/mass spectrometry in a drug discovery environment

The use of open-access mass spectrometry to monitor synthetic chemistry reactions, and also the integrity and purity of new chemical entities, has been a part of the medicinal chemist's tool-box for more than 5 years. Originally in our group at Wyeth Research there were two open-access methods available to the chemists, flow injection analysis (FIA) and liquid chromatography/mass spectrometry (LC/MS). The FIA method was approximately 3 min long, while the LC/MS method was approximately 20 min long (including an 8 min gradient). Within the first 2 years, the total number of open-access analyses increased by approximately 125%. It is interesting, however, that the number of LC/MS analyses increased by more than 285%. This is attributed to the fact that the chemists began using the LC/MS data to monitor reactions and also to check final product integrity and purity. In addition, the number of chemists performing parallel synthesis reactions has increased; thus, individual chemists can produce sample sets of up to 100 vials. This paper describes the implementation of new methodology, which accommodates the need for much faster run times and also the ability to acquire alternating positive and negative ion spectra within the same run. In addition, the instrument has been configured to e-mail the resulting processed data report to the submitting chemist. Several methods have been developed, including structure elucidation using in-source collision-induced dissociation (CID) and night-time analysis. The LC/MS methods for this system are described herein and are applicable to both industrial and academic synthetic chemistry optimization efforts.     

Formation and stability of a Janus-Wedge type of DNA triplex

A new type of DNA targeting with the formation of a Janus-Wedge (J-W) triple helix is described. The "wedge" residue (W) attached to a PNA backbone is designed to insert itself into double-stranded DNA and base pair with both Watson-Crick faces. To study the stability of such an assembly, we have examined the formation of the J-W triplex with dC8 - T8 target sequence. The use of this target sequence permits the study of this new helix form without competing Watson-Crick interactions between the two target residues. Studies indicate that the W strand binds to both target strands, with defined polarity and a stability (-15.2 kcal/mol) that is roughly the sum of the two independent duplex interactions.     

Spectrophotometric methods for the determination of osmium-III Reaction of osmium tetroxide with 1:5-diphenylcarbo- hydrazide in aqueous solutions followed by extraction of the complex

-A spectrophotometric method has been developed which is applicable to the determination of extremely small quantities of osmium. Osmium is oxidised to the octovalent state, then added to an acidic aqueous solution containing 1:5-diphenylcarbohydrazide (DPC). After heating the aqueous solution to 65°, the osmium-DPC complex is extracted with chloroform. A molar absorbancy index of about 150,000 is obtained. From 7 to 25 μg of osmium can be determined with a coefficient of variation of 6%. It was established that Fe^III, Cu^II, Ru^III and Au^III seriously interfere in the determination of osmium by this method, while Cr^VI, Ni^II, Mo^VI, Ir^III and chloride interfere only when present in relatively high concentrations.     

ENHANCED SUSCEPTIBILITY TO HPD-SENSITIZED PHOTOTOXICITY AND CORRELATED RESISTANCE TO TRYPSIN DETACHMENT IN SV-40 TRANSFORMED IMR-90 CELLS

Abstract— The response of a normal human cell strain, IMR-90 and a line derived from it by SV40 transformation were compared after treatment in vitro with hematoporphyrin derivative (HPD) and red light. Transformed cells were inactivated at a significantly higher rate than normal cells when assayed by clonogenic survival. Co-treatment with HPD and light also induces cellular resistance to enzymatic cleavage by trypsin; transformed cells exhibit a greater resistance than the normal cells to detachment from the growing surface. These data indicate that transformed cells may possess intrinsic characteristics that render them more sensitive than normal cells to HPD-induced phototoxicity and that the plasma membrane may be the site of differential toxicity.     

Complex 2 plane bundles over CP(n)

The purpose of this note is to construct examples of non-trivial rank 2 complex bundles over CP(n) with vanishing Chern classes for all n5.