Dry Reforming of Methane on a Highly‐Active Ni‐CeO2 Catalyst: Effects of Metal‐Support Interactions on C−H Bond Breaking

Ni‐CeO₂ is a highly efficient, stable and non‐expensive catalyst for methane dry reforming at relative low temperatures (700 K). The active phase of the catalyst consists of small nanoparticles of nickel dispersed on partially reduced ceria. Experiments of ambient pressure XPS indicate that methane dissociates on Ni/CeO₂ at temperatures as low as 300 K, generating CH_x and CO_x species on the surface of the catalyst. Strong metal–support interactions activate Ni for the dissociation of methane. The results of density‐functional calculations show a drop in the effective barrier for methane activation from 0.9 eV on Ni(111) to only 0.15 eV on Ni/CeO_2?x(111). At 700 K, under methane dry reforming conditions, no signals for adsorbed CH_x or C species are detected in the C 1s XPS region. The reforming of methane proceeds in a clean and efficient way.     

Molybdenum and tungsten structural differences are dependent on ndz(2)/(n + 1)s mixing: comparisons of (silox)3MX/R (M = Mo, W; silox = (t)Bu3SiO)

Treatment of trans-(Et 2O) 2MoCl 4 with 2 or 3 equiv of Na(silox) (i.e., NaOSi (t) Bu 3) afforded (silox) 3MoCl 2 ( 1-Mo) or (silox) 3MoCl ( 2-Mo). Purification of 2-Mo was accomplished via addition of PMe 3 to precipitate (silox) 3ClMoPMe 3 ( 2-MoPMe 3), followed by thermolysis to remove phosphine. Use of MoCl 3(THF) 3 with various amounts of Na(silox) produced (silox) 2ClMoMoCl(silox) 2 ( 3-Mo). Alkylation of 2-Mo with MeMgBr or EtMgBr afforded (silox) 3MoR (R = Me, 2-MoMe; Et, 2-MoEt). 2-MoEt was also synthesized from C 2H 4 and (silox) 3MoH, which was prepared from 2-Mo and NaBEt 3H. Thermolysis of WCl 6 with HOSi ( t )Bu 3 afforded (silox) 2WCl 4 ( 4-W), and sequential treatment of 4-W with Na/Hg and Na(silox) provided (silox) 3WCl 2 ( 1-W, tbp, X-ray), which was alternatively prepared from trans-(Et 2S) 2WCl 4 and 3 equiv of Tl(silox). Na/Hg reduction of 1-W generated (silox) 3WCl ( 2-W). Alkylation of 2-W with MeMgBr produced (silox) 3WMe ( 2-WMe), which dehydrogenated to (silox) 3WCH ( 6-W) with Delta H (double dagger) = 14.9(9) kcal/mol and Delta S (double dagger) = -26(2) eu. Magnetism and structural studies revealed that 2-Mo and 2-MoEt have triplet ground states (GS) and distorted trigonal monopyramid (tmp) and tmp structures, respectively. In contrast, 2-W and 2-WMe possess squashed-T d (distorted square planar) structures, and the former has a singlet GS. Quantum mechanics/molecular mechanics studies of the S = 0 and S = 1 states for full models of 2-Mo, 2-MoEt, 2-W, and 2-WMe corroborate the experimental findings and are consistent with the greater nd z (2) /( n + 1)s mixing in the third-row transition-metal species being the dominant feature in determining the structural disparity between molybdenum and tungsten.     

Cs–Ba separation using N2O as a reactant gas in a Multiple Collector-Inductively Coupled Plasma Mass Spectrometer collision-reaction cell: Application to the measurements of Cs isotopes in spent nuclear fuel samples

In the general frameworks of the nuclear fuel cycle and environmental research field, the Cs isotopic composition must be known with high precision and accuracy. The direct determination of Cs isotopes by mass spectrometry techniques is generally hampered by the presence of Ba isobaric interferences however. Here we present a new method which takes advantage of the collision-reaction cell based Multiple Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICPMS) and allows to analyse Cs isotopes in the presence of Ba without prior separation step. The addition of N₂O gas in the cell leads to an antagonistic behavior of Cs⁺ and Ba⁺ as the latter reacts with the gas to form BaO⁺ and BaOH⁺ products whereas Cs⁺ remains unreactive. The efficiency of the method was demonstrated for an UOx sample by comparing the results obtained (1) from the measurements of pure Cs fractions and (2) from Fission Products fractions containing more than 30 ionisable elements in addition to Cs, Ba, and where U and Pu were previously removed by using ion exchange resin. An excellent agreement is achieved between each set of experiments with an external reproducibility always better than 0.5% (RSD, k = 2). This study confirms the strong potential of collision–reaction cell to measure Cs isotopes in presence of interfering Ba, precluding therefore former systematic chemical separations.     

Lactic acid in solution: investigations of lactic acid self-aggregation and hydrogen bonding interactions with water and methanol using vibrational absorption and vibrational circular dichroism spectroscopies

The infrared vibrational absorption (VA) and vibrational circular dichroism (VCD) spectral features of L-(+)-lactic acid (LA) in CDCl3 solution are concentration dependent, showing evidence of oligomerization with increasing concentrations. To understand the observed spectra, geometry optimizations, vibrational frequencies, and VA and VCD intensities were evaluated for (LA)n with n=1-4 using density functional theory calculations at the B3LYP6-311++G(d,p), B3LYP/cc-pVTZ, and in some cases, B3LYP/aug-cc-pVTZ levels of theory. Comparisons with the experimental spectra indicate that the lowest energy LA dimer (AA), formed by two C Double Bond O...HO hydrogen bonds, is one of the dominating species in solution at room temperature. Possible contributions from the LA trimer and tetramer are also discussed. To model the VA and VCD spectra of LA in water and in methanol, both implicit polarizable continuum model and explicit hydrogen bonding considerations were used. For explicit hydrogen bonding, geometry optimizations of the AA-(water)n and AA-(methanol)n complexes, with n=2,4,6, were performed, and the corresponding VA and VCD spectra were simulated. Comparisons of the calculated and experimental VA and VCD spectra in the range of 1000-1800 cm(-1) show that AA-(water)n with n=6 best reproduces the experimental spectra in water. On the other hand, AA-(methanol)n with n=2 reproduces well the experimental results taken in methanol solution. In addition, we found evidence of chirality transfer, i.e., some vibrational bands of the achiral water subunits gain VCD strength upon complexation with the chiral LA solute. The study is the first to use VCD spectroscopy to probe the structures of LA aggregates and hydrogen bonding solvation clusters in the solution phase.     

Simultaneous Determination of Paracetamol,Ibuprofen, and Caffeine in Tablets by Molecular Absorption Spectroscopy Combined with Classical Least Square Method

In this paper, the classical least-squares (CLS) method with molecular absorption spectrophotometric measurement was used to determine simultaneously paracetamol (PAR), ibuprofen (IBU), and caffeine (CAF) in tablets. The absorbance spectra of the standard solutions and samples were measured over a wavelength from 220 to 300 nm with a 0.5 nm step. The concentration of PAR, IBU, and CAF in the sample solutions was calculated by using Visual Basic for Applications (VBA) and a program called CLS-Excel written in Microsoft Excel 2016. The method and the CLS-Excel program were tested on mixed standard laboratory samples with different PAR, IBU, and CAF concentration ratios, and they showed only small errors and a satisfying repeatability. An analytical procedure for tablets containing PAR, IBU, and CAF was developed. The reliability of the procedure was proved via the recovery and repeatability of the analysis results with an actual tablet sample and by comparing the mean contents of active substances in the tablets obtained from the analytical procedure with the HPLC method. The procedure is simple with a reduced cost compared with the HPLC standard method.     

Functionalized Alkynylplatinum(II) Polypyridyl Complexes for Use as Sensitizers in Dye‐Sensitized Solar Cells

A series of platinum(II) alkynyl‐based sensitizers has been synthesized and found to show light‐to‐electricity conversion properties. These dyes were developed as sensitizers for the application in nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). Their photophysical and electrochemical properties were studied. The excited‐state property was probed using nanosecond transient absorption spectroscopy, which showed the formation of a charge‐separated state that arises from the intramolecular photoinduced charge transfer from the platinum(II) alkynylbithienylbenzothiadiazole moiety (donor) to the polypyridyl ligand (acceptor). A lifetime of 3.4 μs was observed for the charge‐separated state. A dye‐sensitized solar cell based on one of the complexes showed a short‐circuit photocurrent of 7.12 mA cm^?2, an open circuit voltage of 780 mV, and a fill factor of 0.65, thus giving an overall power conversion efficiency of 3.6 %.     

Gas-phase fragmentation of long-lived cysteine radical cations formed via no loss from protonated S-nitrosocysteine

In this work, we describe two different methods for generating protonated S-nitrosocysteine in the gas phase. The first method involves a gas-phase reaction of protonated cysteine with t-butylnitrite, while the second method uses a solution-based transnitrosylation reaction of cysteine with S-nitrosoglutathione followed by transfer of the resulting S-nitrosocysteine into the gas phase by electrospray ionization mass spectrometry (ESI-MS). Independent of the way it was formed, protonated S-nitrosocysteine readily fragments via bond homolysis to form a long-lived radical cation of cysteine (Cys^•+), which fragments under collision-induced dissociation (CID) conditions via losses in the following relative abundance order: •COOH ≫ CH₂S > •CH₂SH-H₂S. Deuterium labeling experiments were performed to study the mechanisms leading to these pathways. DFT calculations were also used to probe aspects of the fragmentation of protonated S-nitrosocysteine and the radical cation of cysteine. NO loss is found to be the lowest energy channel for the former ion, while the initially formed distonic Cys^•+ with a sulfur radical site undergoes proton and/or H atom transfer reactions that precede the losses of CH₂S, •COOH, •CH₂SH, and H₂S.     

A silicone-based stretchable micropost array membrane for monitoring live-cell subcellular cytoskeletal response

External forces are increasingly recognized as major regulators of cellular structure and function, yet the underlying mechanism by which cells sense forces and transduce them into intracellular biochemical signals and behavioral responses ('mechanotransduction') is largely undetermined. To aid in the mechanistic study of mechanotransduction, herein we devised a cell stretching device that allowed for quantitative control and real-time measurement of mechanical stimuli and cellular biomechanical responses. Our strategy involved a microfabricated array of silicone elastomeric microposts integrated onto a stretchable elastomeric membrane. Using a computer-controlled vacuum, this micropost array membrane (mPAM) was activated to apply equibiaxial cell stretching forces to adherent cells attached to the microposts. Using the mPAM, we studied the live-cell subcellular dynamic responses of contractile forces in vascular smooth muscle cells (VSMCs) to a sustained static equibiaxial cell stretch. Our data showed that in response to a sustained cell stretch, VSMCs regulated their cytoskeletal (CSK) contractility in a biphasic manner: they first acutely enhanced their contraction to resist rapid cell deformation ('stiffening') before they allowed slow adaptive inelastic CSK reorganization to release their contractility ('softening'). The contractile response across entire single VSMCs was spatially inhomogeneous and force-dependent. Our mPAM device and live-cell subcellular contractile measurements will help elucidate the mechanotransductive system in VSMCs and thus contribute to our understanding of pressure-induced vascular disease processes.     

Hydrophobic substituent effects on proline catalysis of aldol reactions in water

Derivatives of 4-hydroxyproline with a series of hydrophobic groups in well-defined orientations have been tested as catalysts for the aldol reactions. All of the modified proline catalysts carry out the intermolecular aldol reaction in water and provide high diastereoselectivity and enantioselectivity. Modified prolines with aromatic groups syn to the carboxylic acid are better catalysts than those with small hydrophobic groups (1a is 43.5 times faster than 1f). Quantum mechanical calculations provide transition structures, TS-1a(water) and TS-1f(water), that support the hypothesis that a stabilizing hydrophobic interaction occurs with 1a.     

Modeling and simulation of chemo-electro-mechanical behavior of pH-electric-sensitive hydrogel

A chemo-electro-mechanical multi-field model, termed the multi-effect-coupling pH-electric-stimuli (MECpHe) model, has been developed to simulate the response behavior of smart hydrogels subject to pH and electric voltage coupled stimuli when the hydrogels are immersed in a pH buffer solution subject to an externally applied electric field. The MECpHe model developed considers multiphysics effects and formulates the fixed charge density with the coupled buffer solution pH and electric voltage effects, expressed by a set of nonlinear partial differential governing equations. The model can be used to predict the hydrogel displacement and the distributive profiles of the concentrations of diffusive ionic species and the electric potential and the fixed charge density in both the hydrogels and surrounding solution. After validation of the model by comparison of current numerical results with experiment data extracted from the literature, one-dimensional steady-state simulations were carried out for equilibrium of the smart hydrogels subject to pH and electric coupled stimuli. The effects of several important physical conditions, including the externally applied electric voltage, on the distributions of the concentrations of diffusive ionic species, the electric potential, the fixed charge density, and the displacement of the hydrogel strip were studied in detail. The effects of the ionic strength on the bending deformation of the hydrogels under the solution pH and electric voltage coupled stimuli are also discussed.